Synthesis and structural characterization of an alternating double aquo-bridged and single cyano-bridged polymeric barium–iron complex: {[Ba2(phen)4(H2O)6Fe(CN)6]·Cl·2(phen)·3H2O}n

A new alternating double aquo-bridged and single cyano-bridged polymeric complex {[Ba₂(phen)₄(H₂O)₆Fe(CN)₆]·Cl·2(phen)·3H₂O}_n (1) (phen = 1,10-phenanthroline) has been synthesized and structurally characterized. In the crystal structure the two centrosymmetric [Ba₂(phen)₄(H₂O)₆] units are bridged through two trans CN groups of [Fe(CN)₆]³⁻ ion, which results in the formation of a zig-zag polymeric chain. In each [Ba₂(phen)₄(H₂O)₆] unit, the two Ba centers are joined by double aquo bridges. Both the Ba atoms are 9-coordinated with distorted mono-capped square antiprismatic geometry. An elaborate hydrogen bonding system holds the parallel polymeric chains together.     

Immobilization of cholesterol oxidase and potassium ferricyanide on dodecylbenzene sulfonate ion‐doped polypyrrole film

Dodecylbenzene sulfonate (DBS)‐doped polypyrrole (PPY) conducting polymer films were electrochemically deposited onto the indium‐tin‐oxide (ITO)‐coated glass plates in aqueous medium. The enzyme cholesterol oxidase (ChOx) was immobilized on these DBS–PPY films by a physical adsorption technique. These ChOx‐immobilized DBS–PPY films were characterized by ultraviolet–visible and Fourier transform infrared spectroscopy. The enzyme activity studies indicate that ～40% of ChOx leaches out from the ChOx/DBS–PPY film. The ChOx activity in the ChOx/DBS–PPY film was assayed as a function of cholesterol concentration. The results of amperometric measurements conducted on ChOx/DBS–PPY/ITO film show linearity over the range 2–8 mM of cholesterol solution. The ChOx/DBS–PPY/ITO electrodes exhibit a response time of 30 s and are stable for ～3 months at 4 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3486–3491, 2001     

Experimental and simulation studies on the effect of suction opening orientation on solar vertical chimney

The zero energy building considered is a single storey building in Tiruchirappalli city retrofitted with various green features. This study investigated the effect of a suction opening orientation on a vertical solar chimney (VSC), integrated into a one-storey building. It was designed, manufactured and tested through selection of different suction openings for the entry of air, including right, left, front, back, both right and left and both front and back sides. Genetic algorithm (GA) calculates maximum air flow rate for a building with VSC for better suction opening, in Tiruchirappalli's dry, environmental conditions. GA is a useful technique for finding an improved suction opening specifically in the presence of a host of independent parameters which are large. The obtained results are related to fluid flow temperature distribution along the chimney, mass flow rate and air change per hour. The findings between the GA and the experimental results show sound agreement.     

Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter

This study proposes the preliminary simulation of a single cylinder spark ignition engine with waste heat recovery system. To harvest waste heat energy from the engine exhaust a thermoelectric generator coupled to a vapor absorption refrigeration (VAR) system was proposed in this simulation work. Parametric simulation of engine, thermoelectric generator and VAR using thermodynamic relations was carried out in MATLAB – Simulink software. An attempt has been made mathematically to integrate engine, thermoelectric generator and VAR system to study the effect of engine load, speed, equivalence ratio on thermoelectric output and coefficient of performance (COP) of a VAR system. In this study, the VAR system runs by taking heat energy from the exhaust gas and the electric power produced by a thermoelectric generator was utilized to run the pump of the refrigeration system. It was found that COP of the absorption refrigeration system depends on engine load, speed and air fuel equivalence ratio. The study also reveals that about 10% to 15% of the total exhaust energy can be harvested using this system.     

Nanostructured Zn-Fe2O3 thin film modified by Fe-TiO2 for photoelectrochemical generation of hydrogen

Nanostructured semiconductor thin films of Zn-Fe₂O₃ modified with underlying layer of Fe-TiO₂ have been synthesized and studied as photoelectrode in photoelectrochemical (PEC) cell for generation of hydrogen through water splitting. The Zn-Fe₂O₃ thin film photoelectrodes were designed for best performance by tailoring thickness of the Fe-TiO₂ film. A maximum photocurrent density of 748 μA/cm² at 0.95 V/SCE and solar to hydrogen conversion efficiency of 0.47% was observed for 0.89 μm thick modified photoelectrode in 1 M NaOH as electrolyte and under 1.5 AM solar simulator. To analyse the PEC results the films were characterized for various physical and semiconducting properties using XRD, SEM, EDX and UV–Visible spectrophotometer. Zn-Fe₂O₃ thin films modified with Fe-TiO₂ exhibited improved visible light absorption. A noticeable change in surface morphology of the modified Zn-Fe₂O₃ film was observed as compared to the pristine Zn-Fe₂O₃ film. Flatband potential values calculated from Mott–Schottky curves also supported the PEC response.     

Performance of a stand-alone renewable energy system based on energy storage as hydrogen

Electrolytic hydrogen offers a promising alternative for long-term energy storage of renewable energy (RE). A stand-alone RE system based on energy storage as hydrogen has been developed and installed at the Hydrogen Research Institute, and successfully tested for autonomous operation with developed control system and power conditioning devices. The excess energy produced, with respect to the load requirement, has been sent to the electrolyzer for hydrogen production. When energy produced from the RE sources became insufficient, with respect to the load requirement, the stored hydrogen was fed to a fuel cell to produce electricity. The RE system components have substantially different voltage-current characteristics and they are integrated through power conditioning devices on a dc bus for autonomous operation by using a developed control system. The developed control system has been successfully tested for autonomous operation and energy management of the system. The experimental results clearly indicate that a stand-alone RE system based on hydrogen production is safe and reliable.     

Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines

The increasing industrialization and motorization of the world has led to a steep rise for the demand of petroleum-based fuels. Petroleum-based fuels are obtained from limited reserves. These finite reserves are highly concentrated in certain regions of the world. Therefore, those countries not having these resources are facing energy/foreign exchange crisis, mainly due to the import of crude petroleum. Hence, it is necessary to look for alternative fuels which can be produced from resources available locally within the country such as alcohol, biodiesel, vegetable oils etc. This paper reviews the production, characterization and current statuses of vegetable oil and biodiesel as well as the experimental research work carried out in various countries. This paper touches upon well-to-wheel greenhouse gas emissions, well-to-wheel efficiencies, fuel versatility, infrastructure, availability, economics, engine performance and emissions, effect on wear, lubricating oil etc.     

Estimation of convective mass transfer in solar distillation systems

In this article a thermal model has been developed to determine the convective mass transfer for different Grashof Number range in solar distillatiOn process. The model is based on simple regression analysis. Based on the experimental data obtained from the rigorous outdoor experimentation on passive and active distillation systems for summer climatic conditions, the values of C and n have been calculated. The modified values of C and n for Nu=C(GrPr)ⁿ, are proposed as C=0.0322; N=0.4114 for 1.794 × 10⁶6 in a passive solar still and C=0.0538; N=0.383 for 5.498 × 10⁶6 in an active solar still. The percentage deviation between experimental and theoretical results are found within an accuracy of 12%.     

Effect of co‐solvents on the photovoltaic performance of an inverted organic solar cell

We investigated the effect of varying polymer crystallinity, morphology, and optical property, produced by adding four different co‐solvents in to the poly(3‐hexylthiophene) (P3HT): [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) active layer blend solution, on the functioning of an inverted polymeric solar device. Photovoltaic devices primed with cyclohexanone co‐solvent showed the best performance with power conversion efficiency (PCE) reaching a value of 3.01 ± 0.04%. Improvement in efficiency is related to an increase in photocurrent which is due to a combined result of ordered P3HT crystallite growth, as well as of the precise size and phase separation of domains. POLYM. ENG. SCI., 55:1382–1388, 2015. © 2015 Society of Plastics Engineers     

A Reliable Method for Recycling (RE)‐Ba‐Cu‐O (RE: Sm,Gd, Y) Bulk Superconductors

Single grain (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) high‐temperature superconductors are able to generate high magnetic fields. However, the relatively high cost of the raw materials and the low yield of the manufacturing process have impeded the development of practical applications of these materials to date. This article describes a simple, reliable, and economical method of recycling failed bulk (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) samples. Sixty‐four failed bulk samples, with diameters up to 31 mm, were recycled with a yield of 90%. The key innovation in this recycling process involves reintroducing the liquid phase into the melt process, which is normally lost during the primary peritectic processing of these materials. This enables the direct re‐growth of failed samples from solid form without the need for re‐grinding into powder. We also demonstrate that the superconducting performance and microstructure of the recycled samples is similar to that of the primary grown samples.