Phase Separation Derived Core/Shell Structured Cu11V6O26/V2O5 Microspheres: First Synthesis and Excellent Lithium‐Ion Anode Performance with Outstanding Capacity Self‐Restoration

Novel amorphous vanadium oxide coated copper vanadium oxide (Cu₁₁V₆O₂₆/V₂O₅) microspheres with 3D hierarchical architecture have been successfully prepared via a microwave‐assisted solution method and subsequent annealing induced phase separation process. Pure Cu₁₁V₆O₂₆ microspheres without V₂O₅ coating are also obtained by an H₂O₂ solution dissolving treatment. When evaluated as an anode material for lithium‐ion batteries (LIBs), the as‐synthesized hybrid exhibits large reversible capacity, excellent rate capability, and outstanding capacity self‐recovery. Under the condition of high current density of 1 A g^?1, the 3D hierarchical Cu₁₁V₆O₂₆/V₂O₅ hybrid maintains a reversible capacity of ≈1110 mA h g^?1. Combined electrochemical analysis and high‐resolution transmission electron microscopy observation during cycling reveals that the amorphous V₂O₅ coating plays an important role on enhancing the electrochemical performances and capacity self‐recovery, which provides an active amorphous protective layer and abundant grain interfaces for efficient inserting and extracting of Li‐ion. As a result, this new copper vanadium oxide hybrid is proposed as a promising anode material for LIBs.     

Anionic Regulated NiFe (Oxy)Sulfide Electrocatalysts for Water Oxidation

The construction of active sites with intrinsic oxygen evolution reaction (OER) is of great significance to overcome the limited efficiency of abundant sustainable energy devices such as fuel cells, rechargeable metal–air batteries, and in water splitting. Anionic regulation of electrocatalysts by modulating the electronic structure of active sites significantly promotes OER performance. To prove the concept, NiFeS electrocatalysts are fabricated with gradual variation of atomic ratio of S:O. With the rise of S content, the overpotential for water oxidation exhibits a volcano plot under anionic regulation. The optimized NiFeS‐2 electrocatalyst under anionic regulation possesses the lowest OER overpotential of 286 mV at 10 mA cm^?2 and the fastest kinetics being 56.3 mV dec^?1 to date. The anionic regulation methodology not only serves as an effective strategy to construct superb OER electrocatalysts, but also enlightens a new point of view for the in‐depth understanding of electrocatalysis at the electronic and atomic level.     

Fast Dynamic Visualizations in Microfluidics Enabled by Fluorescent Carbon Nanodots

Microfluidic systems have become a superior platform for explorations of fascinating fluidic physics at microscale as well as applications in biomedical devices, chemical reactions, drug delivery, etc. Exploitations of this platform are built upon the fundamental techniques of flow visualizations. However, the currently employed fluorescent materials for microfluidic visualization are far from satisfaction, which severely hinders their widespread applications. Here fluorescent carbon nanodots are documented as a game‐changer, applicable in versatile fluidic environment for the visualization in microfluidics with unprecedented advantages. One of the fastest fluorescent imaging speeds up to 2500 frames per second under a normal contionous wave (CW) laser line is achieved by adopting carbon nanodots in microfluidics. Besides better visualizations of the fluid or interface, fluorescent carbon nanodots‐based microparticles enable quantitative studies of high speed dynamics in fluids at microscale with a more than 90% lower cost, which is inaccessible by traditionally adopted fluorescent dye based seeding particles. The findings hold profound influences to microfluidic investigations and may even lead to revolutionary changes to the relevant industries.     

Silica shell-assisted synthetic route for mono-disperse persistent nanophosphors with enhanced in vivo recharged near-infrared persistent luminescence

Near-infrared (NIR) persistent-luminescence nanoparticles have emerged as a new class of background-free contrast agents that are promising for in vivo imaging.The next key roadblock is to establish a robust and controllable method for synthesizing monodisperse nanoparticles with high luminescence brightness and long persistent duration.Herein,we report a synthesis strategy involving the coating/etching of the SiO2 shell to obtain a new class of small NIR highly persistent luminescent ZnGa2O4∶Cr3+,Sn4+ (ZGOCS) nanoparticles.The optimized ZGOCS nanoparticles have an excellent size distribution of ～15 nm without any agglomeration and an NIR persistent luminescence that is enhanced by a factor of 13.5,owing to the key role of the SiO2 shell in preventing nanoparticle agglomeration after annealing.The ZGOCS nanoparticles have a signal-to-noise ratio ～3 times higher than that of previously reported ZnGa2O4∶Cr3+ (ZGC-1) nanoparticles as an NIR persistent-luminescence probe for in vivo bioimaging.Moreover,the persistent-luminescence signal from the ZGOCS nanoparticles can be repeatedly re-charged in situ with external excitation by a white lightemitting diode;thus,the nanoparticles are suitable for long-term in vivo imaging applications.Our study suggests an improved strategy for fabricating novel high-performance optical nanoparticles with good biocompatibility.     

Photocatalytic mechanism of high-activity anatase TiO<Subscript>2</Subscript> with exposed (001) facets from molecular-atomic scale: HRTEM and Raman studies

Anatase TiO₂ with a variant percentage of exposed (001) facets was prepared under hydrothermal processes by adjusting the volume of HF, and the photocatalytic mechanism was studied from atomic-molecular scale by HRTEM and Raman spectroscopy. It was revealed that: 1) From HRTEM observations, the surface of original TiO₂ with exposed (001) facets was clean without impurity, and the crystal lattice was clear and completed; however, when mixed with methylene blue (MB) solution, there were many 1 nm molecular absorbed at the surface of TiO₂; after the photocatalytic experiment, MB molecules disappeared and the TiO₂ lattice image became fuzzy. 2) The broken path of the MB chemical bond was obtained by Raman spectroscopy, i.e., after the irradiation of the light, the vibrational mode of C-N-C disappeared due to the chemical bond breakage, and the groups containing C-N bond and carbon rings were gradually decomposed. Accordingly, we propose that the driving force for breaking the chemical bond and the disappearance of groups is from the surface lattice distortion of TiO₂ during photocatalyzation.