Hydroxyl Groups Promoted Ag Dispersion and Excellent Performance of Ag/Al2O3 Catalyst for HCHO Oxidation

Catalysis Letters - Hydroxyl groups are considered as anchoring sites for active components on catalysts. Guided by this viewpoint, 4 wt. % Ag/Al2O3 catalyst derived from Boehmite (AlOOH) was...     

Molybdate and tungstate as corrosion inhibitors for cold rolling steel in hydrochloric acid solution

The inhibition effects of molybdate and tungstate on the corrosion of cold rolling steel (CRS) in hydrochloric acid solution (0.1-0.5 M) were investigated by weight loss and electrochemistry methods. The results reveal that both molybdate and tungstate are very good inhibitors with little concentration. The adsorption of inhibitors on the CRS surface basically obeys the Langmuir adsorption isotherm equation. The effect of temperature on the corrosion behavior of CRS was also studied at 25 °C and 35 °C, the thermodynamic parameters such as adsorption heat (ΔH⁰) and adsorption free energy (ΔG⁰) were calculated. In the same conditions, a comparative study of corrosion inhibition of molybdate and tungstate indicated that molybdate was the better inhibitor in 0.1 M HCl. However, the value of percentage inhibition efficiency (IE) was dependent on the concentration of inhibitors in 0.2-0.5 M HCl. It seemed that molybdate did not have the strong inhibitive effect compared to tungstate with relatively small concentration of inhibitors, but molybdate was a better inhibitor over a wide concentration range of inhibitors. A kinetic study of cold rolling steel in uninhibited and inhibited acid was also discussed. Various parameters such as rate constant k and the kinetic parameter B were calculated for the reactions of corrosion. Polarization curves showed that both molybdate and tungstate are mixed-type inhibitors in acidic media.     

护环液压胀形法的新发展及外补液胀形法的生产应用

本文论述了现有液压胀形法生产护环所存在的不足,介绍了新一代液压胀形工艺即外补液胀形的原理、优点,以及在我国首次生产应用中所显示出的明显的技术经济效益。     

长轴表面激光淬火变形与控制

应用激光淬火强化技术控制长轴的淬火变形，分析了激光淬火变形的原因和影响因素。研究结果表明，激光淬火不仅可使长轴振摆变形量控制在很小的范围内，而且可将已变形的长轴校直到很高的精度。     

Machine Learning Reduced Gene/Non-Coding RNA Features That Classify Schizophrenia Patients Accurately and Highlight Insightful Gene Clusters

RNA-seq has been a powerful method to detect the differentially expressed genes/long non-coding RNAs (lncRNAs) in schizophrenia (SCZ) patients; however, due to overfitting problems differentially expressed targets (DETs) cannot be used properly as biomarkers. This study used machine learning to reduce gene/non-coding RNA features. Dorsolateral prefrontal cortex (dlpfc) RNA-seq data from 254 individuals was obtained from the CommonMind consortium. The average predictive accuracy for SCZ patients was 67% based on coding genes, and 96% based on long non-coding RNAs (lncRNAs). Machine learning is a powerful algorithm to reduce functional biomarkers in SCZ patients. The lncRNAs capture the characteristics of SCZ tissue more accurately than mRNA as the former regulate every level of gene expression, not limited to mRNA levels.     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

EFFECT OF TRACE ADDITIVE ON ANTI-OXIDATION OF MOLTEN Sn-Pb EUTECTICS

以撇取氧化膜称重的方法对比了周期表中25个常见元素对Sn-Pb共晶合金抗氧化能力的影响。其中以Ga,Ge,P的能力最强。最佳含量(wt-％)分别为Ga0.0008,Ge0.004,P0.003。用对氧化渣的化学分析法、X射线衍射法以及合金表层的X射线光电子能谱法研究了Ga,Ge,P三元素对Sn-Pb合金的抗氧化机理。实验表明,添加的微量元素均在表层高度富集,厚度30—40(A),Ga则深达70-100(A),它们形成致密的保护膜。膜的成分是相应添加元素的氧化物与氧化锡形成的复杂含氧酸盐。温度对含P和Ge的合金影响较大,高于350℃则失去其抗氧化能力。含Ga的合金在400℃范围内一直是稳定的。     

SELECTION OF FILLER METAL FOR ALUMINUM BRAZING AND ITS REACTION WITH BASE METAL

考察了28种有代表性的微量元素对Al-Si共晶钎料的熔点,流动性,抗腐蚀性以及钎缝折弯能力的影响。其中以Al-Si(13.0)-Be(0.4—0.8)-Sr(0.03—0.06)-La(0.03—0.06)钎料体系最为理想。本文还探讨了钎料对母材熔蚀的机理,分析了钎焊温度和钎料组成的影响,此外,还认为与母材熔入钎料的速度以及液态钎料沿钎缝的流布速度有关,此二速度的比值愈大,熔蚀愈烈。最后,在钎焊温度下对钎缝进行了不同时间的保温处理,发现钎缝的强度和抗弯能力仅有不大程度的改善。     

金属粉末注射成形技术的最新研究动态与发展趋势

简要阐述了粉末注射成形技术的特点与应用 ,并从粉末的制备、粘结剂体系的设计、注射成形过程及其计算机模拟等几个方面阐明了粉末注射成形技术的最新研究动态 ,最后提出了粉末注射成形技术的重要发展趋势     

矿山磨光球用钢XK5159H的生产试制

XK5159H钢连铸连轧棒材用于制造矿山磨光球，对于钢的纯净度、低倍组织、探伤结果及DI值等均有严格的要求，很难控制。我们通过制定内控化学成分及合理的工艺路线，使生产试制一次成功。