Nuclear magnetic resonance of adsorbed 3He films on Grafoil and argon-coated grafoil. II. Intermediate and near-monolayer coverages

Continuous wave (CW) nuclear magnetic resonance measurements have been made at 5.5 MHz of ³He adsorbed on Grafoil and on argon (monolayer)-coated Grafoil at coverages 0.55 x 1.35 (x = 1 corresponds to one monolayer), in the temperature range 0.35–4.21 K. The results indicate that the near-monolayer coverages (0.9 x 1.0) behave as 2D solids with dipole-dipole coupling modulated by quantum exchange between nearest neighbors. The exchange frequency for this solid phase is evaluated and is seen to be comparable to that observed in bulk, solid ³He for similar atomic spacing. The intermediate coverages, 0.55 x 0.80, showed no evidence of line broadening in the entire temperature range investigated, while the relative magnetic susceptibilities indicated no deviation from Curie's law. No evidence for the registered phase was found at x = 0.60 either for ³He on Grafoil or for ³He on argon-coated Grafoil. A sharp decrease was observed in linewidth after completion of the monolayer, making NMR an excellent probe for the determination of monolayer completion. We have also made linewidth measurements for a coverage x = 0.95 of ³He on graphitized carbon black (Sterling FT grade) at 4.2 and 1.2 K. The results are consistent, as in the case of ³He on Grafoil, with a 2D solid with significant quantum tunneling between nearest neighbors. This result, however, is in disagreement with the measurements of Rollefson, also for ³He on graphitized carbon black of the same grade, who observed a rigid lattice behavior with negligible tunneling between neighbors, for a coverage x = 0.90. This discrepancy is not yet understood.Supported by a grant from the National Science Foundation.     

Characterization and densification studies on ThO2-UO2 pellets derived from ThO2 and U3O8 powders

ThO₂ containing around 2-3% ²³³UO₂ is the proposed fuel for the forthcoming Indian Advanced Heavy Water Reactor (AHWR). This fuel is prepared by powder metallurgy technique using ThO₂ and U₃O₈ powders as the starting material. The densification behaviour of the fuel was evaluated using a high temperature dilatometer in four different atmospheres Ar, Ar-8%H₂, CO₂ and air. Air was found to be the best medium for sintering among them. For Ar and Ar-8%H₂ atmospheres, the former gave a slightly higher densification. Thermogravimetric studies carried out on ThO₂-2%U₃O₈ granules in air showed a continuous decrease in weight up to 1500 °C. The effectiveness of U₃O₈ in enhancing the sintering of ThO₂ has been established.     

Enhanced green emission from Tb-Bi co-doped GdAlO3 nanophosphors

Bi³⁺ and Tb³⁺ ions co-doped GdAlO₃ (GAP) nanophosphors have been synthesized by means of solvothermal reaction method. The XRD pattern of GAP phosphor confirms their orthorhombic phase. The luminescence properties of these phosphors have been explored by analyzing their excitation and emission spectra along with their decay curves. The excitation spectra of GAP:Tb³⁺, Bi³⁺ phosphors consist of a broad band in the shorter wavelength region due to the 4f⁸ → 4f⁷5d¹ transition of Tb³⁺ ions overlapped with the 6s² → 6s¹6p¹ (¹S₀ → ³P₁) transition of Bi³⁺ ions and some sharp peaks in the longer wavelength region due to f → f transitions of Tb³⁺ ions. The present phosphors exhibit green color due to strong ⁵D₄ → ⁷F₅ transition of Tb³⁺ ions. The emission intensity was enhanced by co-doping with Bi³⁺ ions under 292 nm excitation, which indicate that the efficient energy transfer occurred from Bi³⁺ to Tb³⁺ ions.     

A Petri Net based approach to determine the disassembly strategy of a product

In order to protect the environment and regain value added to products, a process known as disassembly has come into the limelight. This process is to be applied to reuse abandoned goods and materials. Manufacturers are being forced to establish disassembly plants and to develop their products' designs so as to maintain the government's dictate to dispose off their products in an environmentally responsible manner. This research presents a cost-based heuristic analysis for a circuit board assembly. Various components of the product and their assembly relationships are represented by a Petri Net diagram. Firing the transitions of the disassembly Petri Net is integrated with cost-based indices to develop an effective disassembly strategy. The methodology discussed here simplifies the decisionmaking process involved in disassembly planning. A comprehensive disassembly process planning system is proposed here and is exemplified by a case study of circuit board assembly.     

Acoustic seafloor sediment classification using self-organizingfeature maps

A self-organizing feature map (SOFM), a kind of artificial neural network (ANN) architecture, is used in this work for continental shelf seafloor sediment classification. Echo data are acquired using an echosounding system from three types of seafloor sediment areas. Excellent classification (~100%) for an ideal output neuron grid size of 15×1 is obtained for a moving average of 35 input snapshots     

Robust ego-motion estimation and 3-D model refinement using surface parallax.

We present an iterative algorithm for robustly estimating the ego-motion and refining and updating a coarse depth map using parametric surface parallax models and brightness derivatives extracted from an image pair. Given a coarse depth map acquired by a range-finder or extracted from a digital elevation map (DEM), ego-motion is estimated by combining a global ego-motion constraint and a local brightness constancy constraint. Using the estimated camera motion and the available depth estimate, motion of the three-dimensional (3-D) points is compensated. We utilize the fact that the resulting surface parallax field is an epipolar field, and knowing its direction from the previous motion estimates, estimate its magnitude and use it to refine the depth map estimate. The parallax magnitude is estimated using a constant parallax model (CPM) which assumes a smooth parallax field and a depth based parallax model (DBPM), which models the parallax magnitude using the given depth map. We obtain confidence measures for determining the accuracy of the estimated depth values which are used to remove regions with potentially incorrect depth estimates for robustly estimating ego-motion in subsequent iterations. Experimental results using both synthetic and real data (both indoor and outdoor sequences) illustrate the effectiveness of the proposed algorithm.     

Fluorescence properties and energy transfer mechanism of Sm ion in lead telluroborate glasses

We report the fluorescence properties of Sm³⁺-doped lead telluroborate glasses of composition PbF₂.TeO₂.H₃BO₃.Sm₂O₃ as a function of Sm³⁺ concentration. A Judd-Ofelt scheme was used to determine the intensity parameters and radiative properties of Sm³⁺ ion. The emission and decay measurements were carried out at 402 nm excitation. Beyond 1.0 mol% Sm³⁺ concentration, the luminescence quenching is observed. The decay curves of ⁴G_5/2 level are well fitted to a single exponential function. The evaluated radiative properties suggest that the ⁴G_5/2 → ⁶H_7/2 transition is responsible for reddish-orange luminescence which might be used in the development of visible lasers.     

Enhancement of bending strain tolerance and current carrying property of MgB2 based multifilamentary wires

The effect of bending strain on current carrying capacity of MgB₂ multifilamentary wires was studied with 4, 8 and 16 multifilamentary wires. The critical current density (J_C) of straight wires and bent wires with 5, 10, and 15 cm diameter was measured. Both annealed & bent and bent & annealed wires were used for measurement. The J_C of annealed & bent wires were found to decrease with decrease in bent diameter and the rate of degradation of J_C decreased with increasing number of filaments, while bent & annealed wires almost retained its J_C at all diameters studied.     

Improving post irradiation stability of high density polyethylene by multi walled carbon nanotubes

Sterilization of implants and other clinical accessories is an integral part of any medical application. Although many materials are used as implants, polyethylene stands unique owing to its versatility. Carbon nanotubes are being used as a filler material to enhance the properties of polyethylene. However, the role of multi walled carbon nanotubes (MWCNTs) as an effective antioxidant and radical scavenger in resisting the deteriorating effects of sterilization is yet to be studied in detail. The present work is aimed to investigate the mechanical properties and oxidation stability of irradiated high density polyethylene (HDPE) reinforced by MWCNTs with various concentrations such as 0.25%, 0.50%, 0.75% and 1.00 wt.%. The composites were exposed to ⁶⁰Co source in air and irradiated at different dosage level starting from 25 to 100 kGy and then shelf aged for a period of 120 days prior to investigation. The loss in toughness, Young’s modulus and ultimate strength at 100 kGy for 1 wt.% MWCNTs composite were found to be 21.5%, 20.3% and 19.2%, respectively compared to that of unirradiated composite. FTIR and ESR studies confirmed the antioxidant and radical scavenging potentialities of MWCNTs with increased concentration and irradiation dosage. It was found that by the addition of 1 wt.% MWCNTs into virgin HDPE, the oxidation index of the composite at 100 kGy was decreased by 56.2%. It is concluded that the addition of MWCNTs into polyethylene not only limits the loss of mechanical properties but also improves its post irradiation oxidative stability.