Microstructural study of iron nitride thin films deposited by ion beam sputtering

An amorphous iron nitride thin film was deposited using reactive ion beam sputtering of iron by a beam of argon and nitrogen ions. Nitrogen content in the film as determined from conversion electron Mössbauer spectroscopy (CEMS) and X-ray photoelectron spectroscopy (XPS) was FeN_0.7. The mass density of the film was calculated using energy-dispersive X-ray reflectivity (EDXRR) measurements and is found to be 6.0 gm/cm³. CEMS shows that the film is nonmagnetic in nature. Morphology of the film is obtained from atomic force microscopy (AFM). The surface roughness of the film does not increase appreciably beyond that of the substrate even after a deposition of 131 nm of material with these qualities the film is a good candidate for the multilayer superstructure of a nuclear Bragg monochromator of the type ⁵⁶FeN_0.7/⁵⁷FeN_0.7.     

Treatment of xylene polluted air using press mud-based biofilter

In the present work, biofiltration of xylene vapors has been investigated on a laboratory scale biofilter packed with press mud as filter material inoculated with activated sludge from pharmaceutical industry. Four various gas flow rates, i.e. 0.03, 0.06, 0.09 and 0.12 m(3) h(-1), were tested for inlet xylene concentration ranging from 0.2 to 1.2 g m(-3). The biofilter proved to be highly efficient in the removal of xylene at a gas flow rate of 0.2m(3) h(-1) corresponding to a gas residence time of 2.8 min. For all the tested inlet concentrations, the removal efficiency decreased for high gas flow rates. For all the tested gas flow rates, a decrease in the removal efficiency was noticed for high xylene inlet concentration. The follow-up of carbon dioxide concentration profile through the biofilter revealed that the mass ratio of carbon dioxide produced to the xylene removed was approximately 2.52, which confirms complete degradation of xylene if one considers the fraction of the consumed organic carbon used for the microbial growth.     

Manganese–Schiff base complex immobilized silica materials for electrocatalytic oxygen reduction

Curtailment of platinum catalysts loading in fuel cell is a recent central issue. As substitutes, these days several organic metal chelate compounds having featured moieties of M–N₄ or M–N₂O₂ (M = transition metal ion) are being used as cathode catalysts in fuel cells. Here, in this study, we report in detail the electrocatalytic activity of manganese–Schiff base complexes for oxygen reduction reaction in 0·05 M HClO₄ at room temperature. Actually, [Mn(salen)]⁺: [N,N′-bis(salicylaldehyde) ethylenediimino manganese(III)]⁺ and [Mn(salophen)]⁺: [N,N′-bis(salicylaldehyde)-1,2-phenylenediimino manganese(III)]⁺ were introduced into/onto the MCM-41 type silica spheres and used for the electrocatalytic reduction of oxygen. Synthesized materials were characterized by UV–Vis, FT–IR and electrochemical techniques. Significant low overpotential for oxygen reduction in 0·05 M HClO₄ on [Mn(salen)]⁺- and [Mn(salophen)]⁺-incorporated silica-modified glassy carbon electrodes was observed.     

Nanoparticle formation by swift heavy ion irradiation of indium oxide thin film

In this study, a novel approach for the formation of indium oxide (IO) nanoparticles by irradiating IO thin film using 100?MeV Ag(8+) ions has been reported. High resolution transmission electron microscopy and energy dispersive x-ray analysis confirm the presence of single-crystalline IO nanoparticles after irradiation. The electronic excitations induced by 100?MeV Ag(8+) ions followed by thermal relaxation of the energy spike in IO thin film is responsible for the formation of latent tracks in the film. The electronic energy loss (S(e)) of 100?MeV Ag(8+) ions in IO is greater than the threshold electronic energy loss (S(eth)) required for the track formation in IO film, but is less than S(eth) required for crystalline silicon. Therefore, the tracks are formed in the IO film and not in the silicon substrate. This results in a stress induced at the IO film and silicon substrate interface which is responsible for dewetting of the tracks and the formation of nanoparticles. The theoretically calculated value of nanoparticle diameter using the thermal spike model is found to be in good agreement with the experimentally observed value of 30?nm.     

An artificial biomineral formed by incorporation of copolymer micelles in calcite crystals

Biominerals exhibit morphologies, hierarchical ordering and properties that invariably surpass those of their synthetic counterparts. A key feature of these materials, which sets them apart from synthetic crystals, is their nanocomposite structure, which derives from intimate association of organic molecules with the mineral host. We here demonstrate the production of artificial biominerals where single crystals of calcite occlude a remarkable 13 wt% of 20 nm anionic diblock copolymer micelles, which act as 'pseudo-proteins'. The synthetic crystals exhibit analogous texture and defect structures to biogenic calcite crystals and are harder than pure calcite. Further, the micelles are specifically adsorbed on {104} faces and undergo a change in shape on incorporation within the crystal lattice. This system provides a unique model for understanding biomineral formation, giving insight into both the mechanism of occlusion of biomacromolecules within single crystals, and the relationship between the macroscopic mechanical properties of a crystal and its microscopic structure.     

High temperature tensile properties of 316LN stainless steel investigated using automated ball indentation technique

Type 316LN stainless steel (SS) is the principal structural material for the components of sodium cooled fast reactors operating under elevated temperature conditions. In order to assess the degradation in strength of service exposed components using a small specimen testing technique such as automated ball indentation (ABI), it is necessary to carry out prior detailed ABI studies on the virgin material. In this investigation, the tensile behaviour of as-received 316LN SS were investigated at several temperatures in the range 298–973 K using ABI technique. The load-depth of indentation data measured from ABI tests was analyzed using semi-empirical relationships to obtain the tensile properties. The yield stress and the flow curves were determined by correlating ABI results with corresponding uniaxial tensile test results. Trend curve for tensile strength with temperature, as estimated from ABI tests, exhibited a plateau region in the temperature around 823 K, similar to uniaxial tensile tests. The variations of strength coefficient, strain hardening exponent, yield ratio, hardness and uniform ductility with temperature were evaluated from ABI tests. The ABI technique was found to estimate the influence of temperature on tensile properties sensitively.     

Finite element analysis of contact–impact between a shell of revolution and a rigid wall

In this paper an attempt is made to use a shell theory that includes transverse normal stresses to study the contact–impact behaviour involving thick shells. The problem is solved using the finite element method. The contact criterion is imposed by means of displacement and force constraints. The Lagrangian multipliers technique is used to impose these constraints. The case of a spherical shell impacting a rigid wall with a constant velocity is considered for the analysis. It is shown that the method produces accurate results with less amount of computation than the usual three-dimensional analyses. The effects of the thickness of shell, velocity of impact and modulus of the material are studied.     

Lysine: arginine ratio of a protein influences cholesterol metabolism. Part 1--Studies on sesame protein having low lysine: arginine ratio

The effect of globulin fraction with a lysine: arginine (lys:arg) ratio 0.67, isolated from sesame (Sesamum Indicum) seeds on cholesterol metabolism was studied in rats fed cholesterol free and cholesterol containing diet and compared with casein (lys:arg ratio-2.0). Rats fed sesame seed globulin showed significantly lower concentrations of cholesterol in the serum and aorta. The decrease in serum was manifested in both HDL and LDL + VLDL fractions. There was increased cholesterogenesis in the liver as was evident from increased incorporation of labeled acetate into cholesterol and increased activity of 3-Hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase. Increased hepatic diversion of cholesterol to bile acid synthesis and increased fecal excretion of bile acids and sterols were also observed in rats fed sesame seed globulins. Rats fed sesame globulins also showed significantly higher activity of lipoprotein lipase in the heart and adipose tissue and that of plasma Lecithin: cholesterol acyltransferase (LCAT). These studies suggest that low lysine: arginine ratios of a protein exert hypocholesterolemic effects.     

Significance of carotid restenosis following endarterectomy

The purpose of this study was to determine whether Vietnam veterans' risk for posttraumatic stress disorder (PTSD) was correlated with their premilitary school performance. The authors compared both primary and secondary school record data on hospitalized chemically dependent PTSD patients with those of both non-PTSD, chemically dependent and community controls. All participants were male Vietnam war combat veterans. The comparisons were made with MANCOVA analyses with the effects of combat and age differences between groups controlled. For the most part, primary-school grade point average, absenteeism, and tardiness data on three groups did not differ significantly. However, the mean secondary school grade points of the future PTSD patients were generally substantially lower than those of controls. Additionally, more secondary school absenteeism and tardiness were reported among future PTSD patients than in the controls. The groups did not differ significantly on number of extracurricular activities. Academic weakness, absenteeism, and tardiness in secondary school appear to be moderately strong predictors of vulnerability to PTSD after traumatization. It also supports the claim that chronic PTSD is, in part, the result of weaknesses present before exposure to trauma.