Kinetics of adsorption of sulfur mustard on Al2O3 nanoparticles with and without impregnants

BACKGROUND: Chemical warfare (CW) agents are highly toxic compounds and have been used in war to produce physical immobilization, so safe and effective ways to detoxify them without endangering human life or the environment is of great concern. One of the important ways to achieve protection against CW agents contaminating air is to utilize suitable adsorbent materials, e.g. activated carbon, nanoparticles, etc. In the present study nanoparticles, synthesized through sol–gel processes and loaded with reactive compounds have been used for the degradation of CW agents and to understand their adsorption kinetics using Fickian and linear driving force models. RESULTS: Nanoparticles of AP‐Al₂O₃ (aerogel‐produced alumina) in the size range 2–30 nm with high surface area (375 m² g^?1) were produced by an alkoxide‐based synthesis, and then characterized using N₂‐Brunauer–Emmet–Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA) techniques. Thereafter, these were impregnated, and finally tested for kinetics of adsorption of sulfur mustard (HD) under static conditions. The kinetics was studied using linear driving force and Fickian diffusion models and the kinetics parameters determined. CONCLUSION: AP‐Al₂O₃ with 10% impregnation of 9‐molybdo‐3‐vanadophosphoric acid (10%, w/w) showed the maximum uptake (640 mg g^?1) of HD. The highest adsorption potential indicated that the adsorption was due not only to physisorption but also involved chemisorption. Values of the diffusional exponent indicated the mechanism to be Fickian and anomalous. Hydrolysis, dehydrochlorination and oxidation reactions (identified using gas chromatography‐mass spectrometry (GC/MS)) were found to be the route of degradation of HD over the prepared nanoparticle based adsorbents. Copyright © 2009 Society of Chemical Industry     

Synthesis,structure and calculated NLO properties of [(n-Bu)2Sn-μ-O-μ-OH-Sn(n-Bu)2(CH3CO2)]2 and its putative derivatives

Title compound[(n-Bu)₂Sn-μ-O-μ-OH-Sn(n-Bu)₂(CH₃CO₂)]₂ was obtained accidentally by the reaction of n-Bu₂SnCl₂ with the metalloligand K₂[Ni(CDC)₂] in ethanol - water mixture while synthesizing a heterobimetallic complex [n-Bu₂Sn Ni(CDC)₂]. This has been characterized by micro analysis, UV–Vis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and the single crystal X-ray. The complex forms an interesting supramolecular architecture via (acetate)O?HO hydrogen bonding interactions which generates hydrophobic “pseudo-cage”. The electronic absorption bands of the title complex were assigned with the help of the time dependent density functional theory (TD-DFT) calculations. Density functional theory (DFT) calculations have been performed at the optimized molecular geometry of some of its putative derivatives e. g. trans p-amino cinnamic acid derivative 2; trans p-amino cinnamic acid and trans p-nitro cinnamic acid derivative 3; trans p-amino cinnamic acid and trans p-(N,N dimethylamino) cinnamic acid derivative 4. The first static hyperpolarizability (β) of the title compound and its derivatives were calculated with double numerical differentiation of total energies. The derivatives 3 and 4 showed three times and five times enhancement in the non-linear optical (NLO) responses than the standard p-nitroaniline (pNA).     

Cracking and Damage in a Notched Unidirectional Fiber-Reinforced Brittle Matrix Composite

Results of four-point bend tests on notched beams of a laminated unidirectional fiber-reinforced glass matrix composite are presented. The failure sequence has been established through in situ examination. The dominant damage mode is a mixed-mode, split crack that runs parallel to the predominant fiber directions. The crack interacts with and crosses over imperfectly aligned fibers. The resulting bridging tractions are sufficient to cause the critical strain energy release rate to increase substantially as the crack extends. Several other damage modes are also observed. These include mode I (tensile) matrix cracks bridged by fibers, mode II (shear) cracks, and compressive damage at the loading points.     

Morphological controlled synthesis of micro-/nano-polyaniline

A novel, highly efficient and economical route is developed for the synthesis of polyaniline micro-/nanostructure. Materials were characterized by a complementary combination of X-ray diffraction, Scanning electron microscopy, Fourier-transform infrared, and UV-visible spectrophotometer. Morphology of polyaniline can be tailored by varying the structure-directing agents and pH of the synthesis condition. Ethylene glycol and polyethylene glycol formed a three-dimensional flower-like structure whereas block-copolymer (ethylene oxide and propylene oxide based co-polymer EO₂₀PO₇₀EO₂₀) formed leaf-like structure when the synthesis was performed at pH 7. Using these structure-directing agents, nanorod and granular morphologies were obtained when the samples were synthesized at pH 3 and 1, respectively.     

The mitigation of signal integrity issues in coupled MWCNT bundles and a comparison with Cu interconnects

Journal of Computational Electronics - In the nanoscale regime, carbon nanotubes (CNTs) are being considered as a future alternative interconnect material for traditional copper (Cu) wires in...     

Crosstalk noise analysis of coupled on-chip interconnects using a multiresolution time domain (MRTD) technique

Journal of Computational Electronics - In this paper, crosstalk noise analysis of coupled on-chip interconnects is presented. The multiresolution time domain (MRTD) method is used to analyze the...     

Performance Evaluation of Power Oscillation Damping Controller—Firefly Algorithm Based Parameter Tuning

This paper presents the performance evaluation of power oscillation damping controller based on firefly algorithm (FA) parameter tuning. The power system stabilizer (PSS), unified power flow controller (UPFC), and static synchronous series compensator (SSSC) are tuned with FA by minimizing integral time multiplied by absolute error (ITAE) as an objective function. An integrated multi-stage linear quadratic regulator – power oscillation damping UPFC/SSSC has been proposed with precise tuning of control parameters which results in overall states' oscillation damping as compared to other classical methods. It has been observed that the proposed control structure damps the oscillations adequately and is modular in design methodology. The sample power system comprising six areas has been considered to demonstrate the effectiveness of the concept. The software has been developed based on the proposed work by the authors and the MATLAB code has been generated in R2009b version. The states' inter-relation which has been shown with eigenvalues reflects a better regulation and the step response is also validated.     

Low‐temperature plasma processing for the enhancement of surface properties and dyeability of wool fabric

In the present investigation, wool fabric was treated with a low‐temperature air plasma. The plasma discharge power and treatment time were varied. The effect of plasma treatment on various fabric properties such as wettability, wickability, dyeability, crease recovery angle, breaking strength, and elongation at break was investigated. Surface morphology was studied using SEM micrographs. The fabric became substantially hydrophilic even with a short duration of air plasma treatment of 30 s with improvement in dye uptake and in the rate of dyeing when dyed at a lower temperature. Under these treatment conditions, aging was almost nil in a dry environment, even after 45 days, whereas some aging was observed in a humid (75% relative humidity) environment. A 20% increase in the breaking strength and 24% increase in the elongation at break were observed with reduction in wrinkle recovery angle to 133–144° from 169° for untreated fabric. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43097.     

Graphene oxide reinforced polyvinyl alcohol/polyethylene glycol blend composites as high-performance dielectric material

Novel flexible dielectric composites composed of polyvinyl alcohol (PVA), polyethylene glycol (PEG), and graphene oxide (GO) with high dielectric constant and low dielectric loss have been developed using facile and eco-friendly colloidal processing technique. The structure and morphology of the PVA/PEG/GO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The dielectric behavior of PVA/PEG/GO composites was investigated in the wide range of frequencies from 50 Hz to 20 MHz and temperature in the range 40 to 150 °C using impedance spectroscopy. The dielectric constant for PVA and PVA/PEG (50/50) blend film was found to be 10.71 (50 Hz, 150 °C) and 31.22 (50 Hz, 150 °C), respectively. The dielectric constant for PVA/PEG/GO composite with 3 wt% GO was found to be 644.39 (50 Hz, 150 °C) which is 60 times greater than the dielectric constant of PVA and 20 times greater than the dielectric constant of PVA/PEG (50/50) blend film. The PVA/PEG/GO composites not only show high dielectric constant but also show low dielectric loss which is highly attractive for practical applications. These findings underline the possibilities of using PVA/PEG/GO composites as a flexible dielectric material for high-performance energy storage applications such as embedded capacitors.