Reliability studies on GaAs MESFETs fabricated using spin-onplatinum source

GaAs MESFETs were fabricated using a spin-on platinum source as the gate material. They were subsequently aged at 200°C for up to 1000 h. DC electrical characterisation of the MESFETs was carried out during various stages of annealing. The aging behaviour of these MESFETs was compared with those fabricated using conventionally evaporated platinum sources. The results show that the performance of the MESFETs fabricated using a spin-on platinum source is comparable to those of MESFETs fabricated using a conventionally evaporated platinum source     

Mathematical analysis of dynamic channel selection in indoor mobilewireless communication systems

Dynamic channel selection (DCS) is an algorithm for flexible resource sharing in mobile radio systems. The digital enhanced cordless telecommunications (DECT) standard implements a version of DCS based on time as well as frequency multiplexing. In this paper, mathematical models are developed to evaluate the probabilities of channel availability, desired carrier power, and the carrier-to-interference ratio (CIR) for a constant traffic load. These results can be used to compute the call setup blocking probability. The models reported in this study are based on a decentralized DCS according to the DECT standard specifications. The results show that blocking due to availability of a channel (resource blocking), not interference blocking, generally is the most important factor in overall call blocking. Furthermore, it is seen that resource blocking is sensitive to the implementation of portable sets. Also, with homogeneous static traffic, this type of DCS ran be as good as fixed channel allocation (FCA) with respect to resource blocking     

Association of angiotensin-converting enzyme gene I/D polymorphism with change in left ventricular mass in response to physical training

PURPOSE: To determine the radiologic characteristics of cystic dystrophy of the duodenal wall. MATERIALS AND METHODS: Ten patients with cystic dystrophy of the duodenal wall and chronic pancreatitis underwent ultrasonography (US) (n = 10), computed tomography (CT) (n = 10), endoscopic US (n = 5), and endoscopic retrograde cholangiopancreatography (ERCP) (n = 9). Cystic dystrophy of the duodenal wall was classified as either cystic or solid. The imaging findings were retrospectively analyzed and compared with findings at pancreatoduodenectomy (n = 10). RESULTS: The more frequent cystic type (n = 7) of cystic dystrophy of the duodenal wall was characterized by the presence of easily recognizable cystic lesions (diameter, more than 1 cm), located within the thickened wall of the second portion of the duodenum. The solid type (n = 3) of cystic dystrophy of the duodenal wall demonstrated fibrous thickening of the duodenal wall within which small cysts (diameter, less than 1 cm) were present. The intraduodenal cysts were usually elongated or bilobate with a thick wall. The thickening of the duodenal wall appeared as a solid layer between the duodenal lumen and the pancreas, hypoechoic at US, isoattenuating at unenhanced CT, and hypoattenuating in the early phase (after initiation of infusion of contrast material) and isoattenuating in the late phase (after completion of infusion) at contrast material-enhanced CT. Findings at retrospective analysis of CT and endoscopic US images were characteristic. CONCLUSION: Imaging modalities, notably CT and endoscopic US, helped establish the diagnosis of cystic dystrophy of the duodenal wall.     

Performance evaluation of a teletext system

Four parameters are defined to measure the performance of a teletext system, namely, the probability of delivering a message within specified time, the transmission efficiency, the average number of errors per page, and the throughput. Each of them is derived and computational results are presented taking the UK teletext system as an example. These parameters are compared in their ability to characterize the performance of the teletext system     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

Hydrolysis of Fe(OH)SO4 in the presence of metallic iron

Hydrolysis of Fe(OH)SO₄ was carried out in the presence of metallic iron in order to prevent the formation of iron(III) oxides with strongly bonded sulphate. Under the conditions of the experiment, the products were found to be mixtures of ?-Fe₂O₃ and α-FeOOH. The occluded sulphate, if any, could be easily washed out with water. The hydrolysis reaction passes through an equilibrium state before coming to completion. The entropy with enthalpy of the hydrolysis corresponding to the equilibrium state were found to be 4 e.u. and 0·5 kJ/mol, respectively. The activation energy of the hydrolysis reaction was found to be 21 kJ/mol.     

Corrosion characteristics of aluminium alloy graphite particulate composite in various environments

The present study was aimed at understanding the response of 2014 Al alloy dispersed with graphite particles in various corrosive environments. Marine (sodium chloride) as well as acidic media were selected for the purpose with a view to widen the range of utility of the composite for applications where such environments may be encountered. Studies were also extended to characterize the corrosion resistance of the composite in fresh as well as used lubricating oils to explore the possibilities of using it in bearing, bushing and such other applications. The corrosion behaviour of the base alloy processed under identical conditions was also examined in the above media to see the influence of graphite addition in the alloy. In order to assess the role of the matrix microstructure, the composite as well as the base alloy was subjected to corrosion in heat-treated as well as-cast conditions. It was observed that the specimens suffered from the maximum rate of corrosion in acid, while sodium chloride produced the minimum corrosion rate. Oil in both used and fresh conditions revealed a negligibly small extent of corrosion. The composite was found to show a higher rate of corrosion than the base alloy under identical test conditions. This was attributed to the dispersoid/matrix interfacial corrosion in the case of the graphitic aluminium alloy. Heat treatment of the composite and the base alloy was found to lower the rate of corrosion in the environments tested. Microstructural modifications of the matrix and possible relief of residual stresses were thought to be responsible for the lower rate of corrosion in the heat-treated condition.