Chromatic luminance,colorimetric purity,and optimal aperture‐color stimuli

Chromatic luminance (i.e., luminance of a monochromatic color) is the source of all luminance, since achromatic luminance arises only from mixing colors and their chromatic luminances. The ratio of chromatic luminance to total luminance (i.e., chromatic plus achromatic luminance) is known as colorimetric purity, and its measurement has long been problematic for nonspectral hues. Colorimetric purity (p_c) is a luminance metric in contrast to excitation purity, which is a chromaticity‐diagram metric approximating saturation. The CIE definition of p_c contains a fallacy. CIE defines maximum (1.0) p_c for spectral stimuli as monochromatic (i.e., optimal) stimuli, and as the line between spectrum ends for nonspectrals. However, this line has <0.003 lm/W according to CIE colorimetric data and is therefore effectively invisible. It only represents the limit of theoretically attainable colors, and is of no practical use in color reproduction or color appearance. Required is a locus giving optimal rather than invisible nonspectral stimuli. The problem is partly semantic. CIE wisely adopted the term colorimetric purity, rather than the original spectral luminance purity, to permit an equivalent metric for spectrals and nonspectrals, but the parameter of equivalence was never clear. Since 1 p_c denotes optimal aperture‐color stimuli for spectrals, arguably 1 p_c should denote optimal stimuli consistently for all stimuli. The problem reduces to calculating optimal aperture‐color stimuli (“optimal” in energy efficiency in color‐matching) for nonspectrals, shown to comprise 442 + 613 nm in all CIE illuminants. This remedy merely requires redefinition of 1 p_c for nonspectrals as the line 442–613 nm, and gives meaningful p_c values over the hue cycle allowing new research of chromatic luminance relations with color appearance. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 469–476, 2007     

MANOVA method for analyzing repeated measures designs: An extensive primer.

Contends that tests in repeated-measures designs based on MANOVA are free of sphericity assumptions, and with modern computing software, MANOVA is straightforward to use, even for complex designs and nontraditional hypotheses. A general strategy for implementing MANOVA within statistical computing packages is presented. Regular (preplanned) tests and simultaneous (post hoc) tests are illustrated for a variety of designs and hypotheses. Optimal contrasts for unbalanced repeated measures designs are appended. (33 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Criteria for judging the admissibility of eyewitness testimony of long past events.

Court cases of recovered memories of childhood abuse, in which the victim's testimony may constitute the only evidence available, and a growing body of research demonstrating the inexactitude and suggestibility of autobiographical memory of long past events, are forcing courts and cognitive scientists to seek scientific, principled criteria for admissibility of such testimony. The authors use as examples 2 recent court cases. In the 1st case, a concussion produced total retrograde amnesia for an accident for a period of 3 years, and then, over a few months, the driver claimed his memory returned. In the 2nd, 2 adults reported to the police that they witnessed their sister's murder 35 years earlier, when they were 3 and 5 years old, respectively. The authors provide objective guidelines for courts to determine whether testimony about recovered or very-long-term memory for eyewitnessed events should be admissible. The principles outlined can be expanded easily to include eyewitness testimony in general. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Intact recognition of facial emotion in Parkinson's disease.

Although the basal ganglia have been shown to be critical for the expression of emotion in prosody and facial expressions, it is unclear whether they are also critical for recognition of emotions. Selective pathology of parts of the basal ganglia is a hallmark of individuals with Parkinson's disease, and such patients have been examined in several studies of emotion. We examined 18 patients with Parkinson's disease (11 men, 7 women) and 13 age-, education-, gender ratio-, and IQ-matched normal controls on their ability to recognize emotions signaled by facial expressions. Parkinson's patients performed entirely normally on a quantitative task of recognizing emotional facial expressions. The findings do not support the notion that the sectors of basal ganglia that are dysfunctional in Parkinson's disease are essential for recognizing emotion in facial expressions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cuticular hydrocarbons ofReticulitermes virginicus (Banks) and their role as potential species- and caste-recognition cues

The cuticular hydrocarbon components of four castes ofReticulitermes virginicus (Banks) have been identified and quantitated. Components identified includen-alkanes; 2-, 3-, 11-, 13-, and 15-methyl-alkanes; 11,15-dimethylalkanes, (Z)-9-alkenes; (Z,Z)-7,9-dienes; and (E/Z)-6,9-dienes ranging in carbon number from C₂₁ to C₄₀. All caste forms ofR.virginicus contained the same components, but showed caste-specific proportions. Comparison of these hydrocarbons with those of the sympatric termiteR. flavipes (Kollar) suggest that cuticular hydrocarbons might serve as species- and caste-recognition cues. A bioassay was developed to test this species-recognition hypothesis, with the experimental results supporting the hypothesis.Isoptera: Rhinotermitidae.     

Desulfurization of commercial fuels by π-complexation: Monolayer CuCl/γ-Al2O3

Monolayer CuCl/γ-Al₂O₃ sorbent was studied for desulfurization of a commercial jet fuel (364.3 ppmw S) and a commercial diesel (140 ppmw S). The sorbent was prepared by means of spontaneous monolayer dispersion methods. Deep desulfurization (sulfur levels of <1 ppmw) was accomplished with this sorbent using a fixed-bed adsorber. The CuCl/γ-Al₂O₃ sorbent was capable of removing 6.4 and 11.2 mg of sulfur per gram for jet fuel at breakthrough (at <1 ppmw S) and saturation, respectively. The same sorbent was capable of removing 0.94 and 1.8 mg of sulfur per gram for BP diesel at breakthrough and saturation, respectively. The difference in sulfur capacities for jet fuel and diesel was apparently caused by the difference in concentrations of strongly binding compounds, such as nitrogen heterocycles, heavy (polynuclear) aromatics and fuel additives. In comparison with CuCl/γ-Al₂O₃, Cu(I)Y zeolite has higher sulfur capacities but is less stable and can be easily oxidized to Cu(II)Y by fuel additives (such as oxygenates) and moisture and consequently loses π-complexation ability. However, all these cuprous π-complexation sorbents selectively adsorb thiophenic compounds over aromatics and olefins (as predicted by the high separation factors), which resulted in the observed desulfurization capability. A feasibility study is shown for efficient regeneration of CuCl/γ-Al₂O₃ using ultrasound at ambient temperature. Possible problems associated with desulfurization using π-complexation sorbents for commercial fuels are discussed.     

Epoxy fatty acid ester plasticizers. Preparation and properties

Summary The preparation of epoxy fatty acid ester plasticizers has been reviewed. These plasticizers can be prepared by epoxidation reactions, utilizing a preformed peracid or anin-situ technique. A newin-situ epoxidation process, utilizing hydrogen peroxide and acetic acid in the presence of strong acid catalyst, has been described. Excellent conversions to epoxide have been achieved with a series of monounsaturated and polyunsaturated esters. Epoxy fatty acid esters are excellent plasticizers for vinyl resins. Their performance in a series of additional epoxy plasticizers of vegetable and marine origin is described. Novel epoxy plasticizers based upon mixed acetylated mono- and di-glyceride have been prepared and are found to have excellent plasticizer performance. Presented at the 28th fall meeting, American Oil Chemists’ Society, October 1954, Minneapolis, Minn.     

Raman spectra of Graphon carbon black

The Raman spectrum of Graphon carbon black has been recorded using rotating cell techniques. Angular dependence of scattering at 1360, 1580 and 2700 cm^?1 are reported and these data suggest that the 1360 cm^?1 line is associated with non-planar microstructure distortions. The excitation frequency dependence of the intensity ratio of the bands at 1360 (D) and 1580 cm^?1 (G) is interpreted in terms of resonance (vibronic) interaction. This dependence is primarily the result of an increase in the intensity of the 1360 cm ^?1 line. The disorder-associated line (D) exhibits a significant excitation-dependent shift from 1378 cm^i?1 (457.9 nm Ar⁺) to 1330 cm^?1 (647.1 nm Kr⁺). The “graphite” (G) line position is less sensitive to changes in excitation frequency. The spectral features are discussed in terms of factor group, C_6v⁴, and layer site symmetry, C_3v. Also the possible role of localized alkene-like structure in zones of structural distortion is considered.     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Structure Aware Visual Cryptography

Visual cryptography is an encryption technique that hides a secret image by distributing it between some shared images made up of seemingly random black‐and‐white pixels. Extended visual cryptography (EVC) goes further in that the shared images instead represent meaningful binary pictures. The original approach to EVC suffered from low contrast, so later papers considered how to improve the visual quality of the results by enhancing contrast of the shared images. This work further improves the appearance of the shared images by preserving edge structures within them using a framework of dithering followed by a detail recovery operation. We are also careful to suppress noise in smooth areas.