Development of nano indium tin oxide (ITO) grains by alkaline hydrolysis of In(III) and Sn(IV) salts

Indium tin oxide (ITO) nano powders of different compositions (In: Sn = 90: 10, 70: 30 and 50: 50) were prepared by heat treatment (300-450°C) of mixed hydroxides of In(III) and Sn(IV). The hydroxides were obtained by the reaction of aq. NH₃ with mixed aq. solutions of In(NO₃)₃ and SnCl₄. FTIR and TG/DTA studies revealed that powders existed as In(OH)₃H₂O—SnO₃H₂H₂O in the solid state and then they transformed to In₂O₃—SnO₂ via some metastable intermediates after 300°C. Cubic phase of In₂O₃ was identified by XRD for the oxides up to 30% of Sn. Particle size measurements of the solid dispersed in acetone and SEM study for microstructure showed that the oxides were in the nano range (55-75 nm) whereas the size range determined from Debye-Scherrer equation were 11–24 nm.     

Optimal Operation of Reservoir Systems using Simulated Annealing

A stochastic search technique, simulated annealing (SA), is used to optimize the operation of multiple reservoirs. Seminal application of annealing technique in general to multi-period, multiple-reservoir systems, along with problem representation and selection of different parameter values used in the annealing algorithm for specific cases is discussed. The search technique is improved with the help of heuristic rules, problem-specific information and concepts from the field of evolutionary algorithms. The technique is tested for application to a benchmark problem of four-reservoir system previously solved using a linear programming formulation and its ability to replicate the global optimum solution is examined. The technique is also applied to a system of four hydropower generating reservoirs in Manitoba, Canada, to derive optimal operating rules. A limited version of this problem is solved using a mixed integer nonlinear programming and results are compared with those obtained using SA. A better objective function value is obtained using simulated annealing than the value from a mixed integer non-linear programming model developed for the same problem. Results obtained from these applications suggest that simulated annealing can be used for obtaining near-optimal solutions for multi-period reservoir operation problems that are computationally intractable.     

TEM and high-temperature X-ray diffractometric studies on the structural transformations in Ni3Al

High-temperature X-ray diffraction and TEM studies were conducted on nickel-rich boron-doped Ni₃Al in order to confirm our earlier observations on the existence of a structural transformation in these alloys. The results obtained are discussed through a model proposed. The L1₂ structure appears to transform to another L1₂ or to a DO₂₂ structure during heating. Such a transformation starts at around 700 °C and seems to complete around 1100 °C and appears to be of a continuous type. In the temperature range 700–1100 °C both phases coexist, which causes a tetragonal distortion of the L1₂ lattice giving rise to a tweed morphology in TEM observations. The transformation mechanism involves a periodic modulation of lattice constant. The calculated values for this periodicity (expressed as a number of unit cells in the [100] direction) obtained from X-ray diffraction (L = 62, 70, 74) matched well with that (L = 65) obtained using TEM.     

Inelastic post-buckling analysis of truss structures by dynamic relaxation method

The paper presents the inelastic post-buckling analysis of truss structures by the Dynamic Relaxation (DR) method. A simplified inelastic finite element formulation for truss element and new algorithms are proposed for Elastic Post-Buckling (EPB) analysis and Inelastic Post-Buckling (IEPB) analysis using the DR method. The post-buckling paths for elastic, EPB and IEPB analyses are completely traced using the variable-arc-length method. Four numerical examples are presented to illustrate the application of the proposed algorithms.     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Method for crosscorrelating images in the presence of geometric distortion

The conventional crosscorrelation function (XCF) used in temporal and spatial displacement measurement is unable to provide satisfactory results when linear distortion is also present in the signals. A 'nested' correlation function (NCF) is proposed which produces accurate results, when the distortion is dispersive, with negligible computational overhead.<>     

An alternative explicit formulation for the DKT plate-bending element

The stiffness matrix for the DKT plate-bending element is formulated explicitly in a global co-ordinate system. This approach avoids transformations of stiffness, and elasticity properties for anisotropic materials, from local to global co-ordinates, which were required in previous formulations. A FORTRAN listing of the algorithm is appended for potential users.     

Role of electron traps in the radiation hardness of thermallynitrided silicon dioxide

A number of samples of thermally nitrided SiO₂ with varying concentrations of electron traps were studied in an attempt to correlate the radiation-induced oxide charge with the number of electron traps. Also studied were the detrapping characteristics of irradiated devices. Etch-back experiments were performed to locate the centroid of the trapped charge. The results show that electron trapping does play a role in the improved radiation hardness of nitrided SiO₂, but is not the sole cause of it