Copper(II), nickel(II) and zinc(II) complexes of amidate ligand 1,2-bis(2-hydroxybenzamido)ethane(H2hybe) encapsulated in the super cages of zeolite-Y have been prepared and characterized by spectroscopic studies and thermal as well as X-ray diffraction (XRD) patterns. These complexes catalyze the liquid-phase hydroxylation of phenol with H2O2 to catechol as a major product and hydroquinone as a minor product. Considering the concentration of substrate and oxidant, amount of catalyst, temperature of the reaction and volume of solvent, a best-suited reaction condition has been optimized to get maximum hydroxylation. Under the optimized reaction conditions, [Cu(hybe)]-Y has shown the highest conversion of 40% after 6h, which is followed by [Ni(hybe)]-Y with 37% conversion and [Zn(hybe)]-Y has shown the poorest performance with 33% conversion. All these catalysts are more selective towards catechol formation (90%), irrespective of their catalytic performance. 相似文献
The present work intends to investigate dynamic behaviour of draft gear using finite element method. The longitudinal force that the draft gear absorbs usually leads to the failure of its components, especially, the load bearing draft pads. Dynamic behaviour of an individual draft pad and a draft gear is determined and characterized with exciting frequencies and corresponding mode shapes. The effect of compressive prestress load on the dynamic behaviour of an individual draft pad is also determined as the draft pads in assembled state are under constant axial compressive force in the draft gear. The vibration characteristics of individual draft pad are compared with draft pads that are part of draft gear. The modal analysis gives us a basis for subjecting a draft pad to higher frequency loading for determining its fatigue behaviour.
Catechin (CAT) was crosslinked with trimethylolpropane triglycidyl ether (TMPTGE) to obtain degradable poly(CAT) particles in a single step. Spherical p(CAT) particles with tens of micrometer size range and an isoelectronic point at pH 1.2 were obtained. The hydrolytic degradation of p(CAT) particles provided sustainable and extended release with 264 mg/g CAT release within 10 days at pH 7.4. The antioxidant capacity of 55.0 ± 0.9 μg/ml gallic acid equivalent in terms of total phenol content, and 0.88 ± 0.3 μmol/g trolox equivalent were estimated for p(CAT) particles displaying strong radical scavenging capability. Blood clotting and hemolysis assays demonstrated dose-dependent blood compatibility revealing higher blood compatibility for p(CAT) particles up to 10 μg/ml concentration. The cytotoxicity results show that p(CAT) particles have almost no toxicity for CCD841 normal colon cells at 250 μg/ml concentration in 24 h incubation time giving ~97% cell viability, whereas CAT molecules only provide ~34% cell viability. 相似文献
Alumina-forming ODS superalloys are excellent oxidation-resistant materials. Their resistance relies upon the establishment of a stable, slow-growing, and adherent -alumina. In the present investigation, these alloys exhibited unstable and relatively less adherent -alumina phase, which increased the oxidation rate in the transient stage and converted into -alumina in the later part of the exposure. The oxide-growth process was found to depend upon various parameters such as temperature, time, and presence of an active elecment in the superalloy. Characterization carried out by XRD, SEM/EDAX, and AES on oxidized ODS and non-ODS alloys demonstrated a significant influence of the active element, Y, on the transformation of - to -alumina. SIMS analysis of two-stage oxidation at 900°C for two different durations evidently showed that the change in the transport process is due to -to--alumina transformation. On the basis of these results, a new and consistent mechanism is proposed to explain the influence of -alumina and its transformation on growth kinetics and the effect of yttrium on the transformation leading to good scale adherence and oxidation resistance. 相似文献
Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper. 相似文献
This article reports key findings on the chemical functionalization of carbon nanotubes (CNT). The functionalization of chemical
vapor-deposited CNT was carried out by treating tubes with polyvinyl alcohol through ultrasonication in water with the aid
of a surfactant. The surfactant is expected to promote the unbundling of aggregated CNT. The characterization of functionalized
samples using thermogravimetric analysis, Fourier transform infrared spectroscopy, and Raman spectroscopy revealed that the
CNT were functionalized by the interaction of carboxylic acid and hydroxyl groups. From the characterization studies, it is
apparent that there is a strong interaction between these functional groups and the covalently bonded carbon in the CNT network.
The functionalization process enabled good CNT dispersion in the solution, and the CNT remained in suspension for many days.
To support the effective functionalization of the tubes, the interaction of functionalized CNT with Ni ions is also demonstrated.
This paper was presented at the fourth International Surface Engineering Congress and Exposition held August 1–3, 2005 in
St. Paul, MN. 相似文献
We advocate the use of quickly‐adjustable, computer‐controlled color spectra in photography, lighting and displays. We present an optical relay system that allows mechanical or electronic color spectrum control and use it to modify a conventional camera and projector. We use a diffraction grating to disperse the rays into different colors, and introduce a mask (or LCD/DMD) in the optical path to modulate the spectrum. We analyze the trade‐offs and limitations of this design, and demonstrate its use in a camera, projector and light source. We propose applications such as adaptive color primaries, metamer detection, scene contrast enhancement, photographing fluorescent objects, and high dynamic range photography using spectrum modulation. 相似文献
In the request-based scheme, a patching channel is initiated on arrival of a request in an interarrival time of two adjacent multicast channels. If two requests are received in a short duration in an interarrival time, two patching channels are needed to service them. Both these channels deliver almost the same data, thus, wasting the bandwidth. This problem may be addressed in two ways: using higher level patching technique, or forcing the first request to wait for the second one. Using higher level patching technique makes the system more complex and thus usually not preferred. In the second case, the bandwidth usage certainly reduces, but the length of the waiting time by the first request for the second request is the main issue. In this paper, this issue is addressed by dividing the video duration into uniform time slots such that there is at least one request in a time slot for initiating the patching channel. The proposed scheme is named as Video Data Delivery using Slotted Patching. In this scheme, the patching channels download much less video data than the request-based scheme and thus require less bandwidth. This scheme may not provide immediate services to all users unlike the request-based scheme, but the user's waiting can be made arbitrarily small without using much resources unlike the request-based scheme. 相似文献
Journal of Computer Science and Technology - The Slingshot interconnect designed by HPE/Cray is becoming more relevant in high-performance computing with its deployment on the upcoming exascale... 相似文献
International Journal of Wireless Information Networks - In this work, energy efficient routing protocol variants considering different sink mobility in hierarchical cluster based wireless sensor... 相似文献