Stimulating Biological Nitrification via Electrolytic Oxygenation

The feasibility of electric current prompted aerobic biodegradation of NH4+–N in an attached growth bioreactor system is demonstrated. Nitrification was induced at electric current densities of 1.25 and 2.5?mA/cm2 and with pure oxygen supplied at a rate equivalent to 1.25?mA/cm2 when the bioreactor was operated in batch mode at 6 days detention time. About 84% (27?mg/L)?NH4+–N loss was observed at the end of each detention period during all three experimental conditions, indicating that the electric current did not negatively impact the rate of nitrification. Nitrite accumulation was observed during the initial stages of nitrification experiments with 1.25?mA/cm2 current intensity, but nitrite did not accumulate during the other two sets of nitrification experiments. A mathematical model formulated to obtain the rates of biological reactions showed that rates of NH4+–N removal are similar for all aeration conditions. Abiotic experiments showed that NH4+–N was not removed electrolytically and via stripping, confirming that NH4+–N disappearance is due to biological activity.     

A simple method for the evaluation of fracture toughness of a multi-layered laminate based on the failure stress of sub-laminates

A simple analytical method is presented that can be used to predict the intralaminar fracture toughness of multilayered composite laminate based on the failure stresses of its sub laminates. MCCI approach is followed to verify the fracture toughness of a base laminate and the method is validated comparing the available test data on the toughness value of the base laminate with the prediction. It is observed that a better representation of carbon —epoxy base laminate by its sub laminate gives very good agreement in prediction within 3%.     

Redefining the Diamond Cutting Edge: A Technique that Complements Nano-Metric Surface Generation

Ongoing developments in broadband digital networks and optical devices require mechanical components having nano-metric surface finishes and ultra precision shapes. Such components are processed using the technology of diamond micro-machining in which diamond tools are extensively used. However, these tools are susceptible to chemical attack at high temperatures and induce severe wear, especially when cutting ferrous materials. As a result, these diamond tools need to be redefined (i.e., resharpened) on a regular basis in order to facilitate micro-cutting and to generate nano-metric surface finishes. This paper describes a new way of diamond tool edge re-sharpening and its conditions to achieve both increased accuracy and material removal rate.     

SUSANS With Polarized Neutrons

Super Ultra-Small Angle Neutron Scattering (SUSANS) studies over wave vector transfers of 10^–4 nm^–1 to 10^–3 nm^–1 afford information on micrometer-size agglomerates in samples. Using a right-angled magnetic air prism, we have achieved a separation of ≈10 arcsec between ≈2 arcsec wide up- and down-spin peaks of 0.54 nm neutrons. The SUSANS instrument has thus been equipped with the polarized neutron option. The samples are placed in a uniform vertical field of 8.8 × 10⁴ A/m (1.1 kOe). Several magnetic alloy ribbon samples broaden the up-spin neutron peak significantly over the ±1.3 × 10^–3 nm^–1 range, while leaving the down-spin peak essentially unaltered. Fourier transforms of these SUSANS spectra corrected for the instrument resolution, yield micrometer-range pair distribution functions for up- and down-spin neutrons as well as the nuclear and magnetic scattering length density distributions in the samples.     

Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance

The present study concerns development of a hard in situ boride-dispersed composite layer on the surface of AISI 304 stainless steel substrate to improve the wear resistance property. Laser processing was carried out by melting the surface of sand-blasted AISI 304 stainless steel substrate using a continuous wave CO₂ laser and simultaneous deposition of a mixture of K₂TiF₆ (potassium titanium hexafluoride) and KBF₆ (potassium hexafloroborate) (in the weight ratio of 2:1) using Ar as shrouding environment. Powder feed rate was maintained constant at 4 g/min. Irradiation results in dissociation of a pre-deposited mixture along with a part of the stainless steel substrate, intermixing and rapid solidification to form the composite layer on the surface. The micro-structure of composite layer consists of dispersion of titanium boride particles in AISI 304 stainless steel matrix. Volume fraction of particles is found to be uniform throughout the composite layer, though varied with laser parameters. The micro-hardness of the surface was improved 250–350 VHN as compared to 220 VHN of the AISI 304 stainless steel substrate with a significant improvement in wear resistance property. The mechanism of wear was found to be a combination of adhesive and abrasive in as-received stainless steel. However, it was predominantly abrasive for laser composite surfaced stainless steel.     

Gender bias in journals of gender studies

The causes of gender bias favoring men in scientific and scholarly systems are complex and related to overall gender relationships in most of the countries of the world. An as yet unanswered question is whether in research publication gender bias is equally distributed over scientific disciplines and fields or if that bias reflects a closer relation to the subject matter. We expected less gender bias with respect to subject matter, and so analysed 14 journals of gender studies using several methods and indicators. The results confirm our expectation: the very high position of women in co-operation is striking; female scientists are relatively overrepresented as first authors in articles. Collaboration behaviour in gender studies differs from that of authors in PNAS. The pattern of gender studies reflects associations between authors of different productivity, or ??masters?? and ??apprentices?? but the PNAS pattern reflects associations between authors of roughly the same productivity, or ??peers??. It would be interesting to extend the analysis of these three-dimensional collaboration patterns further, to see whether a similar characterization holds, what it might imply about the patterns of authorship in different areas, what those patterns might imply about the role of collaboration, and whether there are differences between females and males in collaboration patterns.     

Enhancement in ethanol sensing response by surface activation of ZnO with SnO2

A surface functionalized gas sensing material convincingly giving enhanced response to ethanol is demonstrated by SnO₂ activated ZnO. Zinc oxide was synthesized by a chemical route, deposited on an alumina substrate and activated by tin dioxide obtained by on-site oxidation of tin chloride. The XRD study of samples confirmed wurtzite hexagonal structure of zinc oxide and FESEM investigation revealed that surface of activated ZnO microrods was covered by nanoparticles of tin dioxide. Sensing response of sensing elements activated with different concentrations of tin chloride solution has been investigated. It was found that response to ethanol vapor significantly enhanced (eight times) by surface activation with tin dioxide, which optimized at a concentration of 3 wt.%.     

Designing polyethylene terephthalate‐based barrier resins

We have studied the efficiencies of commercially available barrier resins used for food packaging and beverage bottle applications and compared them with resins made using copolymer and blending approaches. The effects of various copolymer related parameters that influence oxygen barrier performance and the underlying mechanisms for these effects in PET‐based copolymers and blends were investigated. Using these approaches, it is possible to make highly effective PET‐based copolymers for gas barrier applications. Blending of PET with phenolic and other organic materials shows equivalent barrier performance in PET copolymers having comonomer levels of <8‐mole %. Reduction in oxygen permeation rates results from the reduction or elimination of short range molecular motion of polyethylene terephthalate molecules. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012