Report of the Second Workshop on the Usage of NetFlow/IPFIX in Network Management

Following the success of the First Workshop on the Usage of NetFlow/IPFIX (Pras et al. in J Netw Syst Manag 17(4), 2009) in 2008, the European EMANICS Network of Excellence organized a second workshop in October 2009, held at Jacobs University Bremen. This report summarizes the workshop and presents its main conclusions.     

Fuzzy Bayesian system reliability assessment based on Pascal distribution

The main purpose of this paper is to provide a methodology for discussing the fuzzy. Bayesian system reliability from the fuzzy component reliabilities, actually we discuss on the Fuzzy Bayesian system reliability assessment based on Pascal distribution, because the data sometimes cannot be measured and recorded precisely. In order to apply the Bayesian approach, the fuzzy parameters are assumed as fuzzy random variables with fuzzy prior distributions. The (conventional) Bayes estimation method will be used to create the fuzzy Bayes point estimator of system reliability by invoking the well-known theorem called ‘Resolution Identity’ in fuzzy sets theory. On the other hand, we also provide the computational procedures to evaluate the membership degree of any given Bayes point estimate of system reliability. In order to achieve this purpose, we transform the original problem into a nonlinear programming problem. This nonlinear programming problem is then divided into four sub-problems for the purpose of simplifying computation. Finally, the sub problems can be solved by using any commercial optimizers, e.g. GAMS or LINGO.     

Design of laminated composite structures for optimum fiber direction and layer thickness,using optimality criteria

In this study, two optimality criteria are presented for optimum design of composite laminates using finite element method. Thickness of the layers and fiber orientation angles in each finite element are considered as the design variables. It will be shown that the optimum design of composite laminates with varying fiber orientations and layers thicknesses may be found by using these optimality criteria in an efficient way, without performing the sensitivity analysis.     

Finite element simulation of the manufacturing process chain of a sheet metal assembly

An increasing number of components in automotive structures are today made from advanced high strength steel (AHSS). Since AHSS demonstrates more severe springback behaviour than ordinary mild steels, it requires more efforts to meet the design specification of the stamped parts. Consequently, the physical fine tuning of the die design and the stamping process can be time consuming. The trial-and-error development process may be shortened by replacing most of the physical try-outs with finite element (FE) simulations of the forming process, including the springback behaviour. Still it can be hard to identify when a stamped part will lead to an acceptable assembly with respect to the geometry and the residual stress state. In part since the assembling process itself will distort the components. To resolve this matter it is here proposed to extend the FE-simulation of the stamping process, to also include the first level sub-assembly stage. In this study a methodology of sequentially simulating each step in the manufacturing process of an assembly is proposed. Each step of the proposed methodology is described, and a validation of the prediction capabilities is performed by comparing with a physically manufactured assembly. The assembly is composed of three sheet metal components made from DP600 steel which are joined by spot welding. The components are designed to exhibit severe springback behaviour in order to put both the forming and subsequent assembling simulations to the test. The work presented here demonstrates that by using virtual prototyping it is possible to predict the final shape of an assembled structure.     

Improving the mechanical,thermal and electrical properties of polyurethane- graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate

Many polyols or diols have been used for the synthesis of polyurethanes (PU), however, to the best of our knowledge, PU-graphene oxide (GO) nanocomposites synthesized with ester-based polyols have been rarely studied. In this work ester-based polyol synthesized by the reaction of adipic acid and 1,4 butane diol, was in-situ polymerized with hexamethylene diisocyanate (HDI) and GO to prepare PU-GO nanocomposites. The content of GO was changed from 1 to 2.5 wt% and its effect on the mechanical, thermal and electrical properties of the samples were examined. The presence of GO more than 1.5% in the nanocomposites resulted in brittle samples and reduced the tensile strength, however, the Young’s modulus of the samples containing 1 and 1.5% was increased to 11 and 12.08-fold (275 and 302 MPa) compared to the neat PU (25 MPa), respectively. The shore A hardness of the samples was increased from 86 for PU to 96 for PUGO-1.5. The abrasion resistance of the samples was decreased by increasing the GO content. Results of the thermogravimetric analysis showed that higher amounts of GO increase the thermal stability of the samples. The chemical and physical interactions between the surface of GO nanolayers and the PU chains were confirmed by FTIR spectroscopy. The dynamic mechanical analysis of the samples showed that GO nanolayers decreased the molecular motions of the PU chains in the nanocomposites which were noticed by shifting the glass transition to the higher temperatures.     

Growth,X-ray peak broadening studies,and optical properties of Mg-doped ZnO nanoparticles

Undoped and Mg-doped ZnO nanoparticles (NPs) (Zn_1?xMg_xO, x=0.01, 0.03, and 0.05) were grown by the sol–gel method. X-ray results showed that the products were crystalline with a hexagonal wurtzite phase. Microscopy studies revealed that the undoped ZnO NPs and Zn_1?xMg_xO NPs had nearly spherical and hexagonal shapes. The size–strain plot (SSP) method was used to study the individual contributions of crystallite sizes and lattice strain on the peak broadening of the undoped and Mg-doped ZnO NPs. Some physical parameters such as strain, stress, and energy-density values were calculated for all reflection peaks of the XRD corresponding to the wurtzite hexagonal phase of ZnO in the 20–100° range from the SSP results. The effect of doping on the band-gap was also investigated by a photoluminescence (PL) spectrometer. The PL results showed that Mg²⁺ is a good dopant to control band gap of the ZnO properties.     

Adhesion of a chemically deposited monetite coating to a Ti substrate

Monetite is a promising biomaterial for restoring the function of the compromised skeletal structures due to its superior osteoconductive and resorption properties. However, its potential as a coating for orthopaedic implants in load bearing applications has not yet been investigated. The aim of this study was to prepare monetite coating on Ti substrate in mild conditions, which may allow incorporation of protein-based drugs during the coating deposition. Coatings were prepared using chemical deposition of monetite on Ti substrate in acidic conditions at 75 °C for 24 h. Coatings were characterised by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Adhesion of the coatings to Ti substrate was measured using tensile tests. EDS confirmed the calcium phosphate nature of the coating and XRD and FTIR confirmed the monetite phase of the coatings. SEM revealed that the coatings were formed of densely packed plate-like monetite crystals, with the crystal size approximately 20 × 10 × 5 μm. Adhesion tests showed cohesive failure of the monetite coatings and the tensile strength of the coating was in the range of 15.43 ± 0.20 MPa. Mechanical tests showed that monetite coatings were stable and could be considered for use with Ti orthopaedic implants.     

Modulating protein adsorption onto hydroxyapatite particles using different amino acid treatments

Hydroxyapatite (HA) is a material of choice for bone grafts owing to its chemical and structural similarities to the mineral phase of hard tissues. The combination of osteogenic proteins with HA materials that carry and deliver the proteins to the bone-defective areas will accelerate bone regeneration. The study investigated the treatment of HA particles with different amino acids such as serine (Ser), asparagine (Asn), aspartic acid (Asp) and arginine (Arg) to enhance the adsorption ability of HA carrier for delivering therapeutic proteins to the body. The crystallinity of HA reduced when amino acids were added during HA preparation. Depending on the types of amino acid, the specific surface area of the amino acid-functionalized HA particles varied from 105 to 149 m² g^–1. Bovine serum albumin (BSA) and lysozyme were used as model proteins for adsorption study. The protein adsorption onto the surface of amino acid-functionalized HA depended on the polarities of HA particles, whereby, compared with lysozyme, BSA demonstrated higher affinity towards positively charged Arg-HA. Alternatively, the binding affinity of lysozyme onto the negatively charged Asp-HA was higher when compared with BSA. The BSA and lysozyme adsorptions onto the amino acid-functionalized HA fitted better into the Freundlich than Langmuir model. The amino acid-functionalized HA particles that had higher protein adsorption demonstrated a lower protein-release rate.     

Highly luminescent film functionalized with CdTe quantum dots by layer‐by‐layer assembly

Robust and facile strategies are required to fabricate film with high luminescence for application in the fields of biomaterials. In this study, the luminescent electrospinning cellulose fibrous mats were decorated with CdTe quantum dots (QDs) and poly(diallyl dimethyl ammonium chloride) (PDDA) using layer by layer (LBL). The characterizations of the LBL films coated mats were executed by X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, fluorescent spectroscopy, X‐ray diffraction, thermal gravimetric analysis, and differential scanning calorimetry. The luminescent intensities were linearly increased with adding the amount of deposited bilayers. The green fabricated (QDs/PDDA)_n coated mat through physical interactions is a promising luminescent material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41893.