Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.     

Influence of High-Permeability Layers for Enhancing Landfill Gas Capture and Reducing Fugitive Methane Emissions from Landfills

Gas collection systems of various designs have been used to control landfill gas emissions, which can be problematic, particularly before installation of final landfill covers. In this work, an innovative gas collection system that includes a permeable layer near the top surface of landfills was evaluated for enhancing capture of landfill gas and reducing fugitive methane emissions. A computational model that accounts for advective and diffusive fluxes of multiple gas components was used to evaluate the efficiency of this new design for intermediate landfill covers. The utility of the high-permeability gas-conductive layer was illustrated for several conditions of interest including varying refuse permeability, varying degrees of permeability anisotropy, and temporal atmospheric pressure changes. Simulations showed that the permeable layer decreased methane emissions by 43% when the horizontal to vertical permeability ratio for refuse was kh/kv = 3 and the domain average kh = 3×10?12?m2, while reductions in methane emissions decreased to 17% for the same anisotropy but with kh = 10?11?m2. With this design, barometric pressure changes did not significantly affect oxygen intrusion or methane emission rates.     

Boundary Stabilization of a Cosserat Elastic Body

Boundary stabilization of vibrating three‐dimensional Cosserat elastic solids are studied using mathematical tools, such as operator theory and semigroup techniques. The advantages of the boundary control laws for both boundary stabilization problems are investigated. The boundary stabilization problems are studied using a Lyapunov stability method and LaSalle's invariant set theorem. Numerical simulations are provided to illustrate the effectiveness and performance of the designed control scheme.     

Dialysis Disequilibrium Syndrome Revisited

An aggressive dialysis in a grossly azotemic patient, especially one with severe metabolic acidosis, can lead to dialysis disequilibrium syndrome (DDS). Mild forms present as nausea, vomiting, restlessness, and headache. Severe manifestations include seizures, obtundation, coma, and even death. This clinical picture is caused by cerebral edema induced by one or more of the following mechanisms:

相似文献   

Healing of double oxide film defects in A356 aluminium melt

The possibility of the bonding of the two layers of a double oxide film defect when held in liquid A356 Al alloy was investigated. The defect was modelled experimentally by maintaining two aluminium oxide layers in contact with each other and the atmosphere trapped between them in the A356 liquid alloy for varying lengths of time of between 30 s and 48 h. Any changes in the composition and morphology of these layers were studied by SEM, EDX and XRD. The results showed that the two layers of a double oxide film defect might bond to each other by two different mechanisms, one during the transformation of Al₂O₃ to MgAl₂O₄ spinel in relatively short holding times, which would cause the layers to bond at several points and the other during the gradual transformation of spinel to MgO in longer times, which would cause strong bonding between the layers. It was shown that any bonding can take place essentially only after the oxygen and nitrogen of the atmosphere within the defect are consumed.     

Flow-Based Network Management: A Report from the IRTF NMRG Workshop

This is the report on the Workshop on Flow-Based Network Management, held within the 37th IRTF NMRG meeting, during IETF 93, on 24th July 2015, in Prague, Czech Republic. Following the tradition of the IRTF NMRG, the workshop focused on technologies, developments, and challenges of using flow-level traffic measurements for network management.