MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique

Silicon - The Sliding wear behaviour of the improved stir cast LM25/SiC composite was investigated using a wear apparatus having pin-on-disc configuration. The tests were conducted at varying...     

Electron microscopy of shock deformation in alumina

Shock recovered samples of a coarse grain (10 μm), high density (>99.9% theoretical) alumina from asymmetric impact tests conducted at 6.5 GPa (e.g. 3.2 times its Hugoniot Elastic Limit) in a single stage gas gun and characterized by X-ray diffractometry, scanning and field emission scanning electron microscopy, and transmission electron microscopy showed prolific presence of reduced crystallite size, higher average microstrain, grain localized micro/nano-scale deformations, micro-cleavages, grain-boundary microcracks, micro-wing crack formation, extensive shear induced deformations and fractures localized at grains, grain boundaries and triple grain junctions, grain localized entanglement of dislocations and their pile up impeded at grain boundaries. A new qualitative model based on micro-shear and micro-twist induced deformation and fracture in single and/or multiple planes in suitably oriented grain and/or grain assembly was developed to explain the experimentally observed damage evolution process.     

Rheological studies of two component high build epoxy and polyurethane based high performance coatings

The work presented in this article involves the study of rheometric profile of several rheological additives in two-component (2K) high build epoxy zinc phosphate primer and two-component high build aliphatic polyurethane topcoat. Viscosity profile and thixotropic behavior at different shear rates have been determined for both the paints using Physica MCR 301 Rheometer of Anton Paar. The valuable information derived from these measurements led to better insight into the influence of these rheological additives on important paint properties like flow and leveling, sag control, in-can settling during storage, etc. Rheometric results were also compared with the results obtained during the actual application of these experimental coatings on mild steel panels. From the rheological study it was concluded that the thickeners based on surface-modified clay and organically modified castor oil derivative work well in epoxy zinc phosphate primer whereas polyurea-based thickener showed better results than other rheological additives in the case of the 2K polyurethane system. Measurement of low shear and high shear viscosity response of different thickeners helps in predicting storage and application behavior of these coatings which correlates well with the actual observation.     

Enhanced mechanical toughness of carbon nanofibrous-coated surface modified Kevlar reinforced polyurethane/epoxy matrix hybrid composites

High-performance Kevlar fiber had extensively been explored to upgraded mechanical properties of the advanced composites. Therefore, this study aimed a challenging work to grow carbon nanofibers onto the Kevlar fiber to improve its fiber-matrix interaction properties. It was successfully done through inexpensive flame deposition as well as modification of matrix with hybrid resin using polyurethane-epoxy mixture. A hand-layup method had been adopted to manufacture the composite laminates. The chemical and surface structures of the prepared laminae were examined by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, and the composite's properties were evaluated tensile test, compact tension (CT) fracture test, fractography, and differential scanning calorimetry. The surface modified Kevlar laminae with CNF were used as reinforcing layer in the epoxy and PU/epoxy hybrid resin matrices. CNF-coated heated Kevlar reinforced laminated PU/epoxy hybrid composites (CNF-Kev/PU-Epoxy) showed highest elongation 47% and fracture toughness (11.7 MPa√m) along with good UTS 139 MPa. Therefore, these hybrid nanocomposites developed by simple inexpensive method would be the potential candidates for several advanced applications particularly in defense, automobile, aerospace, and spacecraft applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48802.     

Phorbol 12-Myristate 13-Acetate Induced Toxicity Study and the Role of Tangeretin in Abrogating HIF-1α-NF-κB Crosstalk In Vitro and In Vivo

Phorbol 12-myristate 13-acetate (PMA) is a potent tumor promoter and highly inflammatory in nature. Here, we investigated the toxic effects of PMA on different model system. PMA (10 μg) caused chromosomal aberrations on the Allium cepa root tip and induced mitotic dysfunction. Similarly, PMA caused embryonic and larval deformities and a plummeted survivability rate on zebrafish embryo in a dose-dependent manner. Persistently, PMA treatment on immortalized human keratinocyte human keratinocyte (HaCaT) cells caused massive inflammatory rush at 4 h and a drop in cell survivability at 24 h. Concomitantly, we replicated a cutaneous inflammation similar to human psoriasis induced by PMA. Herein, we used tangeretin (TAN), as an antagonist to counteract the inflammatory response. Results from an in vivo experiment indicated that TAN (10 and 30 mg/kg) significantly inhibited PMA stimulated epidermal hyperplasia and intra-epidermal neutrophilic abscesses. In addition, its treatment effectively neutralized PMA induced elevated reactive oxygen species (ROS) generation on in vitro and in vivo systems, promoting antioxidant response. The association of hypoxia-inducible factor 1-alpha (HIF-1α)-nuclear factor kappa-light-chain-enhancer of activated b cells (NF-κB) crosstalk triggered by PMA enhanced PKCα-ERK1/2-NF-κB pathway; its activation was also significantly counteracted after TAN treatment. Conclusively, we demonstrated TAN inhibited the nuclear translocation of HIF-1α and NF-κB p65. Collectively, TAN treatment ameliorated PMA incited malignant inflammatory response by remodeling the cutaneous microenvironment.     

Synthesis and Biological Evaluation of Ferrocenylquinoline as a Potential Antileishmanial Agent

The emergence of resistance against antileishmanial drugs in current use necessitates the search for new classes of antileishmanial compounds. Herein we report the design, synthesis, and evaluation of a novel ferrocenylquinoline for activity against Leishmania donovani. 7‐Chloro‐N‐[2‐(1H‐5‐ferrocenyl‐1,2,3‐triazol‐1‐yl)ethyl]quinolin‐4‐amine ( 1 ) was generated by coupling an iron(II) ethynylferrocene species with 4‐(2‐ethylazido)amino‐7‐chloroquinoline using click chemistry. The synthesized compound 1 was tested for its antileishmanial activity using both promastigote and amastigote stages of L. donovani. Compound 1 showed promising anti‐promastigote activity, with an IC₅₀ value of 15.26 μM and no cytotoxicity toward host splenocytes. From the battery of tests conducted in this study, it appears that this compound induces parasite death by promoting oxidative stress and depolarizing the mitochondrial membrane potential, thereby triggering apoptosis. These results suggest that ferrocenylquinoline 1 is a suitable lead for the development of new antileishmanial drugs.     

Synthesis,Characterization, and drug release study of acrylamide‐co‐itaconic acid based smart hydrogel

A new kind of pH and temperature responsive poly(acrylamide‐co‐itaconic acid) hydrogel was prepared by free radical polymerization using ammonium persulfate as initiator and different comonomer ratios. The hydrogels were characterized in terms of chemical composition, swelling‐deswelling behavior, morphology, crystallographic behavior, and drug release properties. All the hydrogels showed high swelling ability in aqueous solutions, the maximum being at pH 7. Swelling decreased on either side of pH 7 (i.e., both in acidic and alkaline region) and increased with increase in temperature. The hydrogel with 10 mol% itaconic acid (IA) absorbed maximum water among the copolymer gels. The cellular structures of the hydrogels were clearly revealed by microscopic analysis and SEM pictures. Swelling of the gels in water followed non‐Fickian type of diffusion principle. The hydrogel was proved to be a controlled release vehicle, for example in drug delivery by using its smart properties. The hydrogel with 10 mol% IA also absorbed maximum amount of drug (ascorbic acid) under study. Incorporation of drug in hydrogel matrix was established from XRD peak analysis. POLYM. ENG. SCI., 55:113–122, 2015. © 2014 Society of Plastics Engineers     

Simultaneous abatement of diesel soot and NOX emissions by effective catalysts at low temperature: An overview

The diesel engine generally achieves the highest fuel, energy, and thermal efficiency due to its very high compression/expansion ratio (14:1 to 25:1). Diesel engines can have a thermal efficiency that exceeds 50%. The main problem is that they emit more pollution like fine black soot particulates (C₈H to C₁₀H) and nitrogen oxides (NO_X). These pollutants have been causing serious problems for human health and the global environment and also impacts on the engine. There are many types of catalysts investigated for simultaneous control of these two pollutants, i.e., platinum group metals (PGM; Pt, Pd, Rh, and Ir) based, spinel-type oxides, hydrotalcite, rare earth metal oxides, mixed transient metal oxides, etc. The high raw material cost of PGM catalysts has become a significant issue, so developing non-PGM catalysts are one of the promising challenges. There are no extra reductants required because soot catalytically oxidizes itself in the presence of NO_X at a faster rate than molecular oxygen and simultaneously NO_X is reduced to nitrogen. The order of oxidation potential of NO_X to oxidized soot in comparison to molecular oxygen is as follows: NO₂ > NO > O₂. To meet the very strict EPA US 2010 and Euro VI regulations of particulate matter (PM) and NO_X for heavy-duty and light-duty vehicular stringent emission, it is very important to apply the integrated catalytic systems to significantly remove PM and NO_X simultaneously. Many papers related to simultaneous control of soot and NO_X over different catalysts have been published but till now some of effective catalysts showing high conversion at low temperatures (possibly within the range typical of diesel exhaust: 150–450°C) have not been reviewed. Thus, this article provides a summary of published information regarding the effective catalysts, their preparation methods, properties, and application for simultaneous control of diesel soot and NO_X.