Forming Limit Diagram Prediction of Tailor-Welded Blank Using Experimental and Numerical Methods

The forming limit diagram (FLD) is a useful method for characterizing the formability of sheet metals. In this article, different numerical models were used to investigate the FLD of tailor-welded blank (TWB). TWBs were CO₂ laser-welded samples of interstitial-free (IF) steel sheets with difference in thickness. The results of the numerical models were compared with the experimental FLD as well as with the empirical model proposed by the North American Deep Drawing Research Group. The emphasis of this investigation is to determine the performance of these different approaches in predicting the FLD. These numerical models for FLD are: second derivative of thinning (SDT), effective strain rate (ESR), major strain rate (MSR), thickness strain rate (TSR), and thickness gradient (TG). Results of this research show necking will be happened, when the value of MSR, TSR, ESR criteria is maximum, TG????0.78 and SDT criterion has the first peak in forming process time. The value of dome height of TWB samples at failure was predicted based on the numerical models for samples with different widths. These numerical predictions were compared with the experimental results. The SDT model indicates a better agreement with experimental results in prediction of both the FLD and the limit dome height (LDH) in comparison to the other numerical models. Both numerical and experimental results show that minimum of LDH is happened in plane strain condition.     

A discrete multicomponent droplet evaporation model; effects of O2-enrichment,steam injection,and EGR on evaporation of diesel droplet

A discrete multicomponent (DMC) model for droplet evaporation in convective ambient is developed. Three different sets of correlations for Nusselt and Sherwood number are examined. The model is compared with experimental data for single and multicomponent droplet evaporation at different conditions and the most suitable set of correlations is selected. Having validated model, the diesel droplet evaporation under different ambient conditions and compositions is investigated. Increasing of oxygen mass fraction in N₂–O₂ mixture ambient from 0 to 1 first decreases and then increases the lifetime. Steam addition enhances the evaporation rate and it affects evaporation more significantly at higher temperatures. Exhaust gas recirculation (EGR) results in slight variations in droplet lifetime and its heating period.     

New SRAM design using body bias technique for low‐power and high‐speed applications

In this paper, a new SRAM cell with body‐bias actively controlled by a control circuit and word line is introduced to realize low‐power and high‐speed applications. The cell uses two word lines, which vary between positive and negative voltage levels to control the body bias of cell's transistors. In this design, using a peripheral control circuit with the least possible number of transistors, the access time is decreased and also a trade‐off between static and dynamic power consumption is provided. Compared to a conventional SRAM cell, the proposed cell reduces the static power consumption by 82% and improves the read performance by 40% and the write performance by 27%. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigating the possibility of Sonofusion in Deuterated acetone

In this article, energetic implosion of a single vapor bubble induced by a standing acoustic wave is theoretically studied and the Sonoluminescing bubble parameters involved in Sonofusion in Deuterated acetone (C₃D₆O) are investigated. Parameters such as radius, wall velocity, interior temperature and pressure of the bubble influenced by various driving pressure amplitudes in Deuterated acetone at ∼0 °C are investigated. Based on the obtained results, the possibility of thermonuclear fusion inside imploding cavitation bubbles is discussed. The interior pressure of C₃D₆O vapor bubbles at the collapse time is extremely high and the increase of the pressure amplitude increases the pressure inside the bubble. Our findings reveal that the maximum temperature inside acoustic-induced cavitation bubble in Deuterated acetone increases with the acoustic pressure amplitude and it is much higher than the maximum temperature inside acoustic induced cavitation bubbles in liquids such as water and acids. Consequently, the calculated temperature at the pressure amplitude of 7.23 bar was about 3.7 × 10⁵ K and it is predicted that at the reported experimental condition, the case of a bubble cluster subjected to the pressure amplitude of about 15 bar, the temperature inside the bubble reaches to 1.2 × 10⁶ K.     

Organic geochemical characteristics of Middle to Late Eocene Shahbazan Formation in Dezful Embayment,SW Iran: A case study from Qaleh-Nar oilfield

Abstract

In a first attempt, Middle to Late Eocene Shahbazan Formation as a possible source rock in Dezful Embayment was geochemically investigated. Maturity indicators derived from Rock-Eval pyrolysis (T_max and PI) and gas chromatography (CPI) show that the organic matter, which dominated by a mixed type II/III kerogen, is thermally mature and has already entered the oil window. A fair to good petroleum-generative potential is suggested by moderate to relatively high values of total organic carbon (TOC) and potential yield (S₁+S₂). Deposition of Shahbazan Formation under low-oxygen condition, which is represented by low pristane/phytane ratio (<1), conduced to preservation of organic matter. This is in accordance with considerable TOC contents, ranging from 1.01 to 1.72?wt%. The relation between pristane/nC₁₇ and phytane/nC₁₈ as well as terrigenous/aquatic ratio (～1) represent the mixed marine and terrestrially sourced organic matter. Based on the results obtained from this study, Shahbazan Formation could have been acted as a prolific oil and gas source rock.     

A case study on the soil–pile–structure interaction of a long span arched structure

Different concepts for modelling of soil-foundation in complete dynamic interaction analysis for a 110-m height 70-m span arched structure on 180 piles were investigated in this paper. The modelling approaches consisted of a sophisticated procedure to account for soil compliance and foundation flexibility by defining frequency-dependent springs and dashpots; namely, flexible-impedance base model. The results of this model were compared with those of the conventional modelling procedures; namely, fixed base model and flexible base model by defining frequency-independent springs. In the flexible-impedance base model, the substructure approach was employed through finite element modelling. To account for the kinematic interaction, the numerical model of the soil, foundation and piles were developed using a verified finite element model in ABAQUS. The free field time history and design spectrum were modified to obtain the foundation input motion. The impedance of pile groups with different length was obtained by the finite element model to assess the inertial interaction. The comparison of the results of the employed models showed that rocking and torsional responses were greatly affected by soil–structure interaction, indicating redistribution of seismic demands. It was also proven that the internal demands of the conventional model considering frequency-independent Winkler springs might be higher than those of the model including pile–soil–structure interaction effects.     

An Efficient Hybrid Approach to Solve Bi-objective Multi-area Dynamic Economic Emission Dispatch Problem

Abstract

Single period economic dispatch cannot handle the intertemporal constraints in multi-period environment. To cope with this issue, the extension of economic dispatch over multiple time intervals (i.e., dynamic economic dispatch) has been introduced that considers the intertemporal constraints between different time intervals. Another issue is determining the most economical generation dispatch that could supply the area demand without violating the tie-line capacity, which cannot be solved by conventional economic dispatch problems. However, this study shows that the most economic schedule of power generation cannot satisfy echo-system expectation; therefore, making a compromise between fuel cost and environmental issues, a hot-button subject in industrialized nations, seems to be crucial. To reach the goals a bi-objective multi-area dynamic economic dispatch approach, which can handle intertemporal and multi-area constraints concurrently, is proposed to assist power system operators more and more. Finally, a hybrid algorithm, namely gray wolf optimizer-particle swarm optimization is introduced to solve the proposed problem and also a set of benchmark problems. By implementing the proposed approach on two small (10-unit, three areas) and large (40-unit, four areas) scale test systems, about 3.1% and 3.3% improvement in generation cost is obtained, respectively compare to the best reported results in the literature.     

No-wait two stage hybrid flow shop scheduling with genetic and adaptive imperialist competitive algorithms

This article studies a no-wait two-stage flexible flow shop scheduling problem with setup times aiming to minimize the total completion time. The problem is solved using an adaptive imperialist competitive algorithm (AICA) and genetic algorithm (GA). To test the performance of the proposed AICA and GA, the algorithms are compared with ant colony optimisation, known as an effective algorithm in the literature. The performance of the algorithms are evaluated by solving both small and large-scale problems. Their performance is evaluated in terms of relative percentage deviation. Finally the results of the study are discussed and conclusions and potential areas for further study are highlighted.     

Chemically crosslinked polyvinyl alcohol for water shut-off and conformance control treatments during oil production: The effect of silica nanoparticles

Polyvinyl alcohol (PVA) is a synthetic commercial polymer with the inherent hydrophilicity, thermal and chemical resistance, ecofriendly, and a high anti-fouling potential making it an attractive choice for water treatment applications, but has been less studied for oil and gas industry applications. On the other hands, nowadays nanotechnology has gained an important space within most core areas in upstream oil and gas operations. The present work, first PVA at various concentrations, was added to 5 wt% NaCl solution and then, crosslinked by formaldehyde 37% at two different concentration ratios. To compare, a nanocomposite hydrogel was fabricated in the same way with 1 wt% silica nanoparticles (NPs). Contact angle and filtration test were performed to confirm the ability of PVA hydrogel and nanocomposite hydrogel for oil and water adsorption. Following this, a rheology measurement was made to realize the gelation time of samples and their performance for water shutoff applications. Finally, an experimental flooding setup was designed to inject the fluids into carbonate plugs in order to estimate of oil and water effective permeability, and oil recovery factor (RF) before and after the PVA hydrogel and nanocomposite hydrogel injection. Both samples wettability tests showed a super-hydrophilic state for brine droplets and neutral state for synthetic oil droplets by using nanocomposite hydrogel. The flooding tests revealed that the PVA hydrogel was clogged the plug with blocking efficiency of 32.83% for water effective permeability and 14.60% for oil effective permeability. This value was calculated to be 50.37% for water effective permeability and 31.36% for oil effective permeability in the case of nanocomposite hydrogel injection. Oil RF was also reported to be 64.58% after injecting PVA hydrogel which was higher than nanocomposite hydrogel injection with RF of 52.08%.