Short beam three point bend tests in syntactic foams. Part I: Microscopic characterization of the failure zones

Scanning Electron Microscopic (SEM) studies were carried out on the failure surface of syntactic foam material tested in a short beam three point bend test (SBT) by employing 21 × 15 × 3 mm³ dimension bearing specimens. The syntactic foams were fabricated using glass microballoons in epoxy binder. The failure of the tensile, compression, and shear dominated regions were studied by SEM at different magnifications. The tensile region had characteristic features, such as partial debonding of the microballoons from the matrix and cracking of glass microballoons, apart from matrix cracking and some river pattern features. The compression side was characterized by crushing and collapsing of microballoons, resulting in accumulation of debris with no apparent river pattern for matrix‐rich regions. The midway positions of the SBT failed surface comprised of deformation bands in the matrix and occasional debonding of microballoons. The morphology recorded in the tensile and compression regions corroborated well with the results obtained on these foam samples in those specimens that were subjected to pure uniaxial tension and compression, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 673–679, 2005     

Surface reconstruction for incremental forming

In spite of extensive efforts being made with regard to virtual process optimization technology, the production of prototype parts is still a necessity. With respect to the production of sheet metal parts in low quantities, incremental sheet metal forming (ISMF) is a highly interesting process. ISMF allows the production of complex parts with drastically reduced costs in tooling and machinery compared to conventional processes like deep drawing. However, ISMF, with it’s incremental nature, introduces the need for generating a tool path considering both final geometry and process-induced deviations or constraints. Consequently, for the generation of the tool path a (tool path) surface, with an adequate offset, is necessary. That is why, within the scope of extensive research work at the Institute of Forming Technology and Lightweight Construction (IUL), a special correction module has been developed, determining this offset e.g. depending on the workpiece geometry. This paper presents the algorithm, the application, and the effect on the produced parts. Furthermore, a concept for an extension regarding further constraints like elastic workpiece behavior is presented.     

Comparative characteristic and erosion behavior of NiCr coatings deposited by various high-velocity oxyfuel spray processes

The purpose of this study is to analyze and compare the mechanical properties and microstructure details at the interface of high-velocity oxyfuel (HVOF)-sprayed NiCr-coated boiler tube steels, namely ASTM-SA-210 grade A1, ASTM-SA213-T-11, and ASTM-SA213-T-22. Coatings were developed by two different techniques, and in these techniques liquefied petroleum gas was used as the fuel gas. First, the coatings were characterized by metallographic, scanning electron microscopy/energy-dispersive x-ray analysis, x-ray diffraction, surface roughness, and microhardness, and then were subjected to erosion testing. An attempt has been made to describe the transformations taking place during thermal spraying. It is concluded that the HVOF wire spraying process offers a technically viable and cost-effective alternative to HVOF powder spraying process for applications in an energy generation power plant with a point view of life enhancement and to minimize the tube failures because it gives a coating having better resistance to erosion.     

Determination of Active Slip/Twinning Modes in AZ31 Mg Alloy Near Room Temperature

In order to determine the deformation modes in AZ31 magnesium alloy at room temperature, computer simulations of deformation texture development and calculation of formability have been carried out. The simulation results were compared with the measured texture results. Based on agreement between the experiments and simulations the active deformation modes were determined. A Visco Plastic Self Consistent model was employed for the simulation of plastic deformation. Simulations and experiments were performed for different initial textures. The goal of the study was to develop the understanding of deformation texture evolution and its effects on mechanical properties of magnesium, with an ultimate goal of improving room temperature formability of magnesium alloys. This article was presented at Materials Science & Technology 2006, Innovations in Metal Forming symposium held in Cincinnati, OH, October 15-19, 2006.     

Developing a limb repositioning robotic interface for persons with severe physical disabilities

Limb repositioning is necessary for individuals with severe physical disabilities to sustain muscle strength and prevent pressure sores. As robotic technologies become ubiquitous, these tools offer promise to support the repositioning process. However, research has yet to focus on ways in which individuals with severe physical disabilities can control robots for these tasks. This paper presents a study that examines the needs and attitudes of potential users with physical disabilities to control a robotic aid for limb repositioning. Subjects expressed interest in using brain–computer interface (BCI) and speech recognition technologies for purposes of executing robotic tasks. The performance of four subjects controlling arm movements on an avatar through the keyboard, mouse, BCI, and Dragon NaturallySpeaking speech recognition was evaluated. Although BCI and speech technologies may limit physical fatigue, more challenges were faced using BCI and speech conditions compared to the keyboard and mouse. This research promotes accessibility into mainstream robotic technologies and represents the first step in the development of a robotic prototype using a BCI and speech recognition technologies for limb repositioning.     

Bacteria foraging optimization in antenna engineering: An application to array fault finding

Finding fault elements in linear antenna arrays using bacteria foraging optimization (BFO) is presented. One of the better options of array diagnosis is to perform it by measuring the radiated field, because in this case, removal of the array from its working site is not required and thereby not interrupting its normal operation. This task of fault finding from far‐field data is designed as an optimization problem where the difference between the far‐field power pattern obtained for a given configuration of failed element(s) and the measured one is minimized w. r. t. the excitations of the array elements. This set of excitations on comparison with the excitations of the original array gives the idea of the fault position and their type, such as either complete fault or partial fault. BFO being relatively new to microwave community when compared with other soft‐computing techniques, its performance was observed w. r. t. time of computation and convergence of the iterative process. Possibility of finding the faults from random sample points and use of minimum number of sample points for array fault finding are the novelties of the present work. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Bipartite coherent-state quantum key distribution with strong reference pulse

We propose an optical scheme for quantum key distribution in which bits are encoded in relative phases of four bipartite weak coherent states ${|\alpha, \alpha\rangle, |-\alpha, -\alpha\rangle, |-\alpha, \alpha\rangle}$ and ${|\alpha, -\alpha \rangle}$ , with respect to a strong reference pulse. We discuss security of the scheme against eavesdropping strategies like, photon number splitting, photon beam splitting and intercept-resend attacks. It is found that present scheme is more sensitive against these eavesdropping strategies than the two-dimensional non-orthogonal state based protocol and BB84 protocol. Our scheme is very simple, requires only passive optical elements like beam splitters, phase shifters and photon detectors, hence is at the reach of presently available technology.     

Security Driven Scheduling Model for Computational Grid Using NSGA-II

Number of software applications demands various levels of security at the time of scheduling in Computational Grid. Grid may offer these securities but may result in the performance degradation due to overhead in offering the desired security. Scheduling performance in a Grid is affected by the heterogeneities of security and computational power of resources. Customized Genetic Algorithms have been effectively used for solving complex optimization problems (NP Hard) and various heuristics have been suggested for solving Multi-objective optimization problems. In this paper a security driven, elitist non-dominated sorting genetic algorithm, Optimal Security with Optimal Overhead Scheduling (OSO₂S), based on NSGA-II, is proposed. The model considers dual objectives of minimizing the security overhead and maximizing the total security achieved. Simulation results exhibit that the proposed algorithm delivers improved makespan and lesser security overhead in comparison to other such algorithms viz. MinMin, MaxMin, SPMinMin, SPMaxMin and SDSG.