Ionic liquid mediated nano-composite polymer gel electrolyte for rechargeable battery application

ABSTRACT

Nano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO₂ nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10^?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO₄ cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO₄) room temperature at 0.1C rate is found to be 138 mAh/g.     

Analysis of sub-anatomic diffusion tensor imaging indices in white matter regions of Alzheimer with MMSE score

In this study, an attempt has been made to find the correlation between diffusion tensor imaging (DTI) indices of white matter (WM) regions and mini mental state examination (MMSE) score of Alzheimer patients. Diffusion weighted images are obtained from the ADNI database. These are preprocessed for eddy current correction and removal of non-brain tissue. Fractional anisotropy (FA), mean diffusivity (MD), radial diffusivity (RD) and axial diffusivity (DA) indices are computed over significant regions (Fornix left, Splenium of corpus callosum left, Splenium of corpus callosum right, bilateral genu of the corpus callosum) affected by Alzheimer disease (AD) pathology. The correlation is computed between diffusion indices of the significant regions and MMSE score using linear fit technique so as to find the relation between clinical parameters and the image features. Binary classification has been employed using support vector machine, decision stumps and simple logistic classifiers on the extracted DTI indices along with MMSE score to classify Alzheimer patients from healthy controls. It is observed that distinct values of DTI indices exist for the range of MMSE score. However, there is no strong correlation (Pearson's correlation coefficient ‘r’ varies from 0.0383 to −0.1924) between the MMSE score and the diffusion indices over the significant regions. Further, the performance evaluation of classifiers shows 94% accuracy using SVM in differentiating AD and control. In isolation clinical and image features can be used for prescreening and diagnosis of AD but no sub anatomic region correlation exist between these features set. The discussion on the correlation of diffusion indices of WM with MMSE score is presented in this study.     

Prediction of burning rate of coal in fluidized-bed combustion

A theory has been proposed to evaluate the burning rate of a single carbon particle in a continuously operated coal-fired fluidized bed. Experimental verification was carried out in a laboratory scale 200 mm × 200 mm combustor. The burning rate increases with the increase of the fluidization velocity and the size of the bed material. The predicted data on burning rate agree fairly well with the experimental values. The gas concentration in the bed and freeboard has also been measured and it is seen that the consumption of oxygen mostly takes place in the bed.     

Anodic film studies on nickel under high rate transpassive dissolution conditions

Coulometry and Auger Electron Spectroscopy (AES) were employed to study thickness and composition of anodic films formed on nickel under high rate transpassive dissolution conditions. Nickel anodes were polarized at constant current densities up to 30 A/cm² in alkaline nitrate electrolytes of different nitrate and hydroxyl ion concentration using a flow channel cell with a constant electrolyte flow velocity of 10m/sec. Results show that with increasing current density film thickness goes through a maximum. Nitrogen is detected at the apparent film metal interface in the current region where metal dissolution occurs. No correlation between anodic film thickness and dissolution efficiency is found. The data, together with previous observations, suggest that high rate transpassive dissolution takes place from film free sites.     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

An Experimental Study to Evaluate the Effect of Ambient Temperature during Manual Lifting and Design of Optimal Task Parameters

In the present study, the effect of lifting task parameters on the heart rate and oxygen uptake of workers during manual lifting tasks in different ambient conditions was evaluated. The experiments conducted in two different temperature conditions showed a significantly higher oxygen uptake and heart rate in colder conditions as compared to warmer conditions. Three other factors, namely, load, lifting frequency, and vertical distance were found to significant affect the responses. Various combinations of significant factors were used to calculate oxygen uptake and heart rate. These were then compared with the safe limits as per the maximum aerobic capacity of workers. Based on these comparisons, the safe combinations were identified that can be used to design lifting tasks in varied ambient conditions. The study further concluded that lifting tasks performed in winter should have different relaxation or fatigue allowances built into the cycle time of the task to compensate for higher exertion. © 2011 Wiley Periodicals, Inc.     

Studies on the reaction of bis(diisopropyl) thiophosphoryl disulfide with silica in the vulcanization of NR

The reaction between bis(diisopropyl) thiophosphoryl disulfide (DIPDIS) and silica has been investigated. The study reveals that DIPDIS can be used as a coupling agent for silica. The chemical bond between the silanol groups of silica and DIPDIS has been established through the isolation and characterization of isopropyl alcohol that is eliminated from the reaction. The chemical nature of the bond is also supported by the IR analysis of the reaction products of silica and DIPDIS obtained both in the presence and absence of rubber. From the exploratory studies it is indicated that DIPDIS can also react with NR even during mixing of ingredients. When used with 2-mercaptobenzothiazole (MBT) or N-oxydiethylene-2-benzothiazole sulfenamide (OBTS) in the presence of silica, DIPDIS exhibits notable activation of cure and enhances the torque, modulus, tensile strength, and the scorch safety.     

Synthesis and Characterization of Hydrophobic TMES/TEOS Based Silica Aerogels

The experimental results on the effect of adding trimethylethoxysilane (TMES) as a co-precursor on the hydrophobicity and physical properties of tetraethoxysilane (TEOS) based silica aerogels, are reported. The molar ratio of TEOS, ethanol (EtOH), water (0.001 M oxalic acid catalyst) was kept constant at 1:5:7 respectively, while the molar ratio of TMES/TEOS (A) was varied from 0 to 0.6. It has been observed that as the A value increases, the gelation time increases. The hydrophobicity was tested by measuring the contact angle, and the surface chemical modification was confirmed by the FTIR spectroscopy studies. The thermal stability of the hydrophobic aerogels was studied in the temperature range from 25 to 800°C. The hydrophobic nature of the aerogel could be maintained up to a temperature of 287°C and above this temperature the aerogels become hydrophilic. The bulk density and the optical transmittance of the aerogels have been found to decrease with increase in A value. The aerogels have been characterized by Fourier transform infrared spectroscopy (FTIR), Optical transmittance, Scanning electron microscopy (SEM), Differential thermal analysis (DTA) and Thermogravimetric analysis (TGA), and Contact angle measurements.     

Combustion of single char particles in a turbulent fluidized bed

The combustion of single bituminous char particles (4-12 mm diameter) was studied in a turbulent fluidized bed operated at 1098 K using air as the fluidising medium. Results indicated that particles burn with constant density following a shrinking sphere model. Burning rates are much higher than those observed in a bubbling fluidized bed. The rate of transfer of oxygen to the particle surface is also higher than that observed in bubbling beds. A model is proposed to calculate the Sherwood numbers of the burning carbon particles. Experimental values of the Sherwood numbers agree well with those predicted from the model.