High-Toughness Silicon Carbide as Armor

Silicon carbide, with single-edge precracked beam (SEPB) toughness greater than 7 MPa·m^1/2, was made by hot-pressing using Al–B–C (ABC) or Al–Y₂O₃ (YAG) as additives. The hardness of SiC processed with a liquid phase was always less than SiC densified without a liquid phase despite having a similar or finer grain size. With increasing Al content, the ABC system changed from trans- to intergranular fracture with a drop in hardness and a two- to threefold increase in SEPB toughness. Strength and Weibull modulus for materials processed with a liquid phase were higher than those of solid-state densified SiC. Ballistic testing, however, did not show any improvement over SiC densified with B and C additives. Depth of penetration was controlled by hardness of the SiC-based materials, while V ₅₀ values for 14.5 mm WC–Co cored projectiles were in the range of 720–750 m/s for all materials tested.     

Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam

In this study an attempt was made to improve the rebound resilience and to decrease the density of ethylene‐vinyl acetate copolymer (EVA) foam. For this purpose, EVA was blended with natural rubber (NR), and EVA/NR blends were foamed at 155°C, 160°C, and 165°C. To investigate the correlation between crosslinking behavior and physical properties of foams, crosslinking behavior of EVA/NR blends was monitored. The physical properties of the foams were then measured as a function of foaming temperatures and blend compositions: 165°C was found to be the optimal temperature for a crosslinking of EVA/NR foam. As a result, the density of EVA/NR blend foamed at 165°C was found to be the lowest. EVA/NR (90/10) blend, foamed at 165°C, showed lower density, better rebound resilience, and greater tear strength than EVA foam. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2212–2216, 2004     

Multiobjective Optimization of Simulated Moving Bed Reactor and its Modification — Varicol Process

A comprehensive optimization study on a Simulated Moving Bed Reactor (SMBR) system is reported in this article for the direct synthesis of Methyl Tertiary Butyl Ether (MTBE). In addition, the SMB technology, which is based on synchronous switching of ports, was modified to a new more flexible Varicol process based on non‐synchronous switching. Multi‐objective optimization has been performed for both SMBR and Varicol and their efficiencies were compared. A state‐of‐the‐art optimization technique, viz., Non‐dominated Sorting Genetic Algorithm (NSGA) that allows handling of these complex optimization problems is employed in this study.     

Water absorption,residual mechanical and thermal properties of hydrothermally conditioned nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> enhanced glass fiber reinforced polymer composites

The durability of the nano-Al₂O₃ enhanced glass fiber reinforced polymer (GFRP) composites in hydrothermal environment is necessary for hydro/hygro thermal applications. The present investigation emphasizes the effect of nano-Al₂O₃ filler concentration on moisture absorption kinetics, residual mechanical and thermal properties of hydrothermally treated GFRP nano-composites. Nano-Al₂O₃ particles were mixed with epoxy matrix through temperature assisted magnetic stirrer and followed by ultrasonic treatment. It has been observed that, the addition of 0.1 wt% of nano-Al₂O₃ into the GFRP nano-composites reduces the moisture diffusion coefficient by 10%, as well as improves the flexural residual strength by 16% and interlaminar residual shear strength by 17% as compared to the neat epoxy GFRP composites. However, the glass transition temperature has not been improved by the addition of nano-Al₂O₃ filler. Weibull design parameters have been determined for dry and hydrothermally conditioned nano-composites. A good agreement between the experimental and the simulated stress–strain results has been observed. The interface failure mechanism has been evaluated by field emission scanning electron microscope to support the new findings.     

Pesticides removal performance by low‐pressure reverse osmosis membranes

Pressure driven techniques (viz. reverse osmosis and nanofiltration) have the potentiality to remove the pesticides from water. The observations revealed that pesticides removal mostly depends upon the molecular weight (size exclusion) and hydrophobicity (log P) of the pesticides. Interfacial polymerization of m‐phenylene diamine (MPD) and trimesoyl chloride (TMC) on the polysulfone membranes impart the salt rejection property in it. It is shown that with the greater salt rejection property, the performance removal of pesticides also is in increasing trend. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3575–3579, 2006     

Orientation of graphitic planes during annealing of “dip deposited” amorphous carbon film: A carbon K-edge X-ray absorption near-edge study

Annealing effect of amorphous carbon thin films on Si(1 0 0) substrates is studied by normal incidence and angle dependent carbon K-edge X-ray absorption near-edge structure (XANES) spectroscopy. The angle dependence of the XANES signal shows that the graphitic basal planes are oriented perpendicular to the surface when the film is annealed at 1000 °C. Micro-Raman spectroscopy reveals two well-separated bands the D band at 1355 cm⁻¹ and G band at ∼1600 cm⁻¹, and their I_D/I_G intensity ratio indicates the formation of more graphitic film at higher annealing temperatures. X-ray diffraction pattern of 1000 °C temperature annealed film confirms the formation of graphite structure.     

Validity of modified Gompertz and Logistic models in predicting cell growth of Pediococcus acidilactici H during the production of bacteriocin pediocin AcH

Data for the cell growth of Pediococcus acidilactici H during the fermentative production of bacteriocin, pediocin AcH (taken from a previous study) was modeled by two sigmoidal functions, modified Gompertz and Logistic. Results showed that the models could adequately account for the cell growth up to the growth phase, but failed to account for the stationary and death phase.     

SARS-CoV-2 Spike Protein Binding of Glycated Serum Albumin—Its Potential Role in the Pathogenesis of the COVID-19 Clinical Syndromes and Bias towards Individuals with Pre-Diabetes/Type 2 Diabetes and Metabolic Diseases

The immune response to SARS-CoV-2 infection requires antibody recognition of the spike protein. In a study designed to examine the molecular features of anti-spike and anti-nucleocapsid antibodies, patient plasma proteins binding to pre-fusion stabilised complete spike and nucleocapsid proteins were isolated and analysed by matrix-assisted laser desorption ionisation–time of flight (MALDI-ToF) mass spectrometry. Amongst the immunoglobulins, a high affinity for human serum albumin was evident in the anti-spike preparations. Careful mass comparison revealed the preferential capture of advanced glycation end product (AGE) forms of glycated human serum albumin by the pre-fusion spike protein. The ability of bacteria and viruses to surround themselves with serum proteins is a recognised immune evasion and pathogenic process. The preference of SARS-CoV-2 for AGE forms of glycated serum albumin may in part explain the severity and pathology of acute respiratory distress and the bias towards the elderly and those with (pre)diabetic and atherosclerotic/metabolic disease.     

Review and comparative evaluation of symbolic dynamic filtering for detection of anomaly patterns

Symbolic dynamic filtering (SDF) has been recently reported in literature as a pattern recognition tool for early detection of anomalies (i.e., deviations from the nominal behavior) in complex dynamical systems. This paper presents a review of SDF and its performance evaluation relative to other classes of pattern recognition tools, such as Bayesian Filters and Artificial Neural Networks, from the perspectives of: (i) anomaly detection capability, (ii) decision making for failure mitigation and (iii) computational efficiency. The evaluation is based on analysis of time series data generated from a nonlinear active electronic system. This work has been supported in part by the U.S. Army Research Laboratory and the U.S. Army Research Office under Grant No. W911NF-07-1-0376, by the U.S. Office of Naval Research under Grant No. N00014-08-1-380, and by NASA under Cooperative Agreement No. NNX07AK49A.     

聚合物波导电光调制器

尽管直接调制激光二级管控制光波是一种简单是一种简单且重要的调制方式，但光波导结构的调制器将使器件性能得到惊人的改善，本文简略介绍了聚合物波导电光调制器，并给出了制备该器件的聚合物材料及制备过程。