Toward two-dimensional self-organization of nanostructures using wafer bonding and nanopatterned silicon surfaces

The structure of ultrathin silicon layers obtained by molecular hydrophobic bonding is investigated. The twist and tilt angles between the two crystals are accurately controlled. The buried Si|Si interface is observed by transmission electron microscopy and by grazing incidence X-ray techniques. For low twist angle values (/spl psi/<5/spl deg/) plane view observations reveal well-defined dislocation networks. Cross-section observations give evidence that the dislocation networks are localized at the bonding interfacial plane with no threading dislocation. Grazing incidence small angle X-ray scattering measurements confirm the good quality of the bonding interface as well as the quality of the dislocation networks. Grazing incidence X-ray diffraction is also used and shows the long-range order of the periodic strain field in the silicon layer. It shows, especially, the interaction between the dislocations. X-ray reflectivity was employed and estimated that the interfacial thickness (i.e., thickness of the bonding) lower than 1 nm decreases when the twist angle increases. The nanopatterned surface is then investigated by scanning tunneling microscopy and X-ray methods. To validate these substrates for long-range order self-organization, the growth of Si and Ge quantum dots is finally achieved.     

Derivation of a crack opening deflection relationship for fibre reinforced concrete panels using a stochastic model: Application for predicting the flexural behaviour of round panels using stress crack opening diagrams

This study is aimed at proposing a simple analytical model to investigate the post-cracking behaviour of FRC panels, using an arbitrary tension softening, stress crack opening diagram, as the input. A new relationship that links the crack opening to the panel deflection is proposed. Due to the stochastic nature of material properties, the random fibre distribution, and other uncertainties that are involved in concrete mix, this relationship is developed from the analysis of beams having the same thickness using the Monte Carlo simulation (MCS) technique. The softening diagrams obtained from direct tensile tests are used as the input for the calculation, in a deterministic way, of the mean load displacement response of round panels. A good agreement is found between the model predictions and the experimental results.     

Adventitial Tertiary Lymphoid Organs as Potential Source of MicroRNA Biomarkers for Abdominal Aortic Aneurysm

Abdominal aortic aneurysm (AAA) is an inflammatory disease associated with marked changes in the cellular composition of the aortic wall. This study aims to identify microRNA (miRNA) expression in aneurysmal inflammatory cells isolated by laser microdissection from human tissue samples. The distribution of inflammatory cells (neutrophils, B and T lymphocytes, mast cells) was evaluated in human AAA biopsies. We observed in half of the samples that adventitial tertiary lymphoid organs (ATLOs) with a thickness from 0.5 to 2 mm were located exclusively in the adventitia. Out of the 850 miRNA that were screened by microarray in isolated ATLOs (n = 2), 164 miRNAs were detected in ATLOs. The three miRNAs (miR-15a-3p, miR-30a-5p and miR-489-3p) with the highest expression levels were chosen and their expression quantified by RT-PCR in isolated ATLOs (n = 4), M1 (n = 2) and M2 macrophages (n = 2) and entire aneurysmal biopsies (n = 3). Except for the miR-30a-5p, a similar modulation was found in ATLOs and the two subtypes of macrophages. The modulated miRNAs were then evaluated in the plasma of AAA patients for their potential as AAA biomarkers. Our data emphasize the potential of miR-15a-3p and miR-30a-5p as biomarkers of AAA but also as triggers of ATLO evolution. Further investigations will be required to evaluate their targets in order to better understand AAA pathophysiology.     

Chimney shape numerical study for solar chimney power generating systems

A large number of researchers have paid great attention to solar chimney (SC) power generating technology, but only a few have studied the chimney configuration. Taking a 10 MW SC system as an example, the physical and mathematical models illustrating the fluid flow, heat transfer and output power features of the system are established. Based on constraints such as equal chimney bottom section area or equal chimney surface area, the impact of several sizes of three different chimney configurations upon the chimney outlet air temperature and velocity, system output power and efficiency is analyzed and the influence of the height‐to‐diameter ratio (H/D) of the cylindrical chimney on system performance is studied as well. After a comprehensive analysis of system output power and efficiency, it is proved by the numerical simulation that the cylindrical chimney would be the best choice among the three basic configurations, whose optimum H/D value ranges from 6 to 8. Copyright © 2011 John Wiley & Sons, Ltd.     

Selection of an adsorbent for lead removal from drinking water by a point-of-use treatment device

The removal of lead from drinking water was investigated to develop a point-of-use water filter that could meet the regulation imposed by the new European Directive 98-83 lowering lead concentration in drinking water below 10 μg L⁻¹. The objective of this research was to assess the potential of different adsorbents (zeolites, resins, activated carbon, manganese oxides, cellulose powder) to remove lead from tap water with a very short contact time. To begin, the repartition of the lead species in a tap water and a mineral water was computed with the computer model CHESS. It showed that in bicarbonated waters lead is mainly under lead carbonate form, either in the aqueous or in the mineral phase. Batch experiments were then conducted to measure the equilibrium adsorption isotherms of the adsorbents. Then, for five of them, dynamic experiments in micro-columns were carried out to assess the outlet lead concentration level. Three adsorbents gave rise to a leakage concentration lower than 10 μg L⁻¹ and were then selected for prototypes experiments: chabasite, an activated carbon coated with a synthetic zeolite and a natural manganese oxide. The proposed method clearly showed that the measurement of equilibrium isotherms is not sufficient to predict the effectiveness of an adsorbent, and must be coupled with dynamic experiments.     

A Novel Approach for Modeling Mixed Convection Film Boiling for a Vertical Flat Plate

A numerical model is developed to study mixed convection film boiling over a vertical flat plate. The integral form of conservation equations for each phase along with the appropriate interface conditions due to phase change is transformed into ordinary differential equation (ODE)-form. The length scale used in the model is based on Rayleigh–Taylor instability wave at the liquid–vapor interface. The heat transfer associated in the process is assessed and results are validated successfully for different available experimental results for natural convection and mixed convection film boiling. The mixed convection film boiling is characterized in terms of relevant nondimensional parameters for each phase.     

Stability properties of the Discontinuous Galerkin Material Point Method for hyperbolic problems in one and two space dimensions

In this paper, stability conditions are derived for the Discontinuous Galerkin Material Point Method (DGMPM) on the scalar linear advection equation for the sake of simplicity and without loss of generality for linear problems. The discrete systems resulting from the application of the DGMPM discretization in one and two space dimensions are first written. For these problems, a second-order Runge-Kutta and the forward Euler time discretizations are respectively considered. Moreover, the numerical fluxes are computed at cell faces by means of either the Donor-Cell Upwind or the Corner Transport Upwind methods for multidimensional problems. Second, the discrete scheme equations are derived assuming that all cells of a background grid contain at least one particle. Although a Cartesian grid is considered in two space dimensions, the results can be extended to regular grids. The von Neumann linear stability analysis then allows the computation of the critical Courant number for a given space discretization. Although the DGMPM is equivalent to the first-order finite volume method if one particle lies in each element, so that the Courant number can be set to unity, other distributions of particles may restrict the stability region of the scheme. The study of several configurations is then proposed.     

Vision-based micro-manipulations in simulation

Microsystem Technologies - Manipulating micro-objects is needed in various applications such as micro-assembly, minimally invasive surgery and micro-organism manipulation, which refers to...     

Monolithic integration of optoelectronic devices with reactivematching networks for microwave applications

Microwave impedance matching networks have been, for the first time, monolithically integrated with GaInAs p-i-n photodiodes and GaInAsP buried ridge stripe structure lasers (λ=1.3 μm), both on a semi-insulating InP substrate. The microwave power transfer optical links were compared using matched and unmatched devices. Compared to an unmatched link, an improvement of 11.4 dB at 5.6 GHz (600 MHz bandwidth) is obtained for the totally matched one; this result corresponds quite well to the theoretical prediction (12 dB at 6 GHz)