Modeling of protein adsorption to DEAE sepharose FF: Comparison of data with model simulation

The equilibrium and kinetic characteristics of the adsorption of human serum albumin (HSA) and ovalbumin (OVA) to the DEAE Sepharose FF weak anion exchanger were experimentally determined. The rate for protein adsorption was simulated with two different models, the first being based on a single lumped kinetic parameter, while the second includes the individual mass transfer processes occurring prior to the adsorption intervention, i.e., diffusion across the liquid film surrounding individual particles and diffusion within the ion exchanger particle itself. The actual adsorption of OVA to DEAE Sepharose FF in fully mixed stirred vessels and in packed bed columns was consistent with both models. In the case of HSA, however, the adsorption profile in an agitated vessel was consistent only with the pore diffusion model and neither model could correctly predict the latter part of the breakthrough profile observed in packed bed experiments.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Robust Unknown Input Observer Design for Linear Uncertain Time Delay Systems with Application to Fault Detection

In this paper, a novel approach is proposed to design a robust fault detection observer for uncertain linear time delay systems. The system is composed of both norm‐bounded uncertainties and exogenous signals (noise, disturbance, and fault) which are considered to be unknown. The main contribution of this paper is to present unknown input observer (UIO)‐based fault detection system which shows the maximum sensitivity to fault signals and the minimum sensitivity to other signals. Since the system contains uncertainty terms, an H_∞ model‐matching approach is used in design procedure. The reference residual signal generator system is designed so that the fault signal has maximum sensitivity while the exogenous signals have minimum sensitivity on the residual signal. Then, the fault detection system is designed by minimizing the estimation error between the reference residual signal and the UIO residual signal in the sense of H_∞ norm. A sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities (LMIs). Application of the proposed method in a numerical example and an engineering process are simulated to demonstrate the effectiveness of the proposed algorithm. Simulation results show the validity of the proposed approach to detect the occurrence of faults in the presence of modeling errors, disturbances, and noise.     

Adaptive tracking with external force disturbance rejection for uncertain robotic systems

This paper is concerned with the tracking control problem of robotic systems perturbed by time-varying parameters, unmodelled dynamics and external force (and moment) disturbances. The upper bound of system uncertainties and disturbances is not required for controller design. Also, no limitations are assumed on the speed of variation and the magnitude of unknown parameters and perturbations. An adaptive algorithm with simplicity and universality properties is proposed to ensure robust tracking. Presenting the closed loop stability proof analytically, the tracking controller is applied to a two-link robot manipulator and the simulation results are demonstrated to show the effectiveness of the method.     

Stabilization of positive switched systems with time-varying delays under asynchronous switching

This paper investigates the state feedback stabilization problem for a class of positive switched systems with time-varying delays under asynchronous switching in the frameworks of continuous-time and discrete-time dynamics. The so-called asynchronous switching means that the switches between the candidate controllers and system modes are asynchronous. By constructing an appropriate co-positive type Lyapunov-Krasovskii functional and further allowing the functional to increase during the running time of active subsystems, sufficient conditions are provided to guarantee the exponential stability of the resulting closed-loop systems, and the corresponding controller gain matrices and admissible switching signals are presented. Finally, two illustrative examples are given to show the effectiveness of the proposed methods.     

Statistical Product Selectivity Modeling and Optimization for γ-Al2O3-Supported Cobalt Catalysts-Based Fischer–Tropsch Synthesis

The statistical selectivity models were developed for four different Fischer–Tropsch synthesis product range, including methane (CH₄), light olefins (C₂=C₄), light paraffins (C₂–C₄), and long-chain hydrocarbons (C₅₊), based on the experimental data obtained over thirteen γ-Al₂O₃ supported cobalt-based catalysts with different cobalt particle and pore sizes. The input variables consist of cobalt metal particle size and catalyst pore size. The cubic and quadratic polynomial equations were fitted to the experimental data, however, the mathematical models were subjected to model reduction for the enhancement of model adequacy, which was investigated through ANOVA. The multi-objective optimization revealed that the maximum C₅₊?selectivity (84.150%) could be achieved at the cobalt particle size and pore sizes of 14.764 and 23.129 nm, respectively, while keeping the selectivity to other hydrocarbon products minimum.

Graphic Abstract

     

Socially Assistive Robots in Elderly Care: A Mixed-Method Systematic Literature Review

The world’s population is aging, and developed countries are engaged in developing a new aged-care paradigm to reduce spiraling healthcare costs. Assistive technologies like Socially Assistive Robots (SAR) are being considered as enablers to support the process of care giving or keep elderly at home longer. This article reports a mixed-method systematic review of SAR in elderly care and recognizes its impact on elderly well-being, integrating evidence from qualitative and quantitative studies. It follows the principles explained in Cochrane Handbook for Systematic Reviews of Interventions and classifies interventions, measures, and outcomes of field trials of SAR in elderly care. Eighty-six studies in 37 study groups have been included. The findings imply positive effects of SAR on elderly well-being. Ten significant recommendations are made to help avoid the current limitations of existing research and to improve future research and its applicability. This review revealed that SAR can potentially enhance elderly well-being and decrease the workload on caregivers. There is a need for rigorous research methodology, person-centered care, caregiver expectation model, multimodal interaction, multimodal data collection, and modeling of culturally diverse groups to facilitate acceptability of SAR.     

Fault detection for continuous‐time switched systems under asynchronous switching

In this paper, the problem of fault detection for continuous‐time switched systems under asynchronous switching is investigated. The designed fault detection filter is assumed to be asynchronous with the original systems. Attention is focused on designing a fault detection filter such that the estimation error between the residual and the fault is minimized in the sense of H _∞ norm. By employing piecewise Lyapunov function and average dwell time techniques, a sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities. Finally, an example of a switched electrical circuit is provided to illustrate the effectiveness of the proposed approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Process Mining Approach of a New Water Quality Index for Long-Term Assessment under Uncertainty Using Consensus-Based Fuzzy Decision Support System

One of the biggest challenges in water quality monitoring is how to optimize big Data gathered from a wide range of resources. This paper presented a new software-based pathway of process mining approach for extending a flexible WQI (Water Quality Index) that would deal with uncertainties derived from missing data occurrence in short- and long-term assessments. The methodology is based on integration of four multi-criteria group decision-making models coupled with fuzzy simulation including AHP (Analytical Hierarchy Process), fuzzy OWA (Ordered Weighting Average), TOPSIS (Technique for Order Preference by Similarity to Ideal Solution), and fuzzy TOPSIS that were used for data mining and group consensus evaluation.. Examining the methodology on groundwater resources being supplied for drinking in Shiraz, Iran showed high integrity, accuracy, and proximity-to-real interpretation of water quality. This was the first study where decision-making risks such as Decision Makers’ risk-prone or risk-aversion attitudes (optimistic degree), DMs’ power, and consensus degree of each water quality parameter have been considered in WQI research. The proposed index offered a flexible choice in defining the intended project duration, stakeholders’ judgments, types of water use and water resource, standards, as well as type and number of water quality parameters. Thus, beside sustaining the unity in structure, this methodology could be suggested as a potentially WQI for other regions. The presented methodology would help more efficient monitoring of water resources for drinking purpose with respect to water quality.