Kinetic modeling of pyrolysis of three Iranian waste oils in a micro-fluidized bed

Different approaches have been used to convert the waste materials into a clean syngas or other chemicals such as methanol. Among them, pyrolysis is a good candidate to produce the synthesis gas and volatile matters for industrial and refinery applications. In this work, we studied the kinetic and chemical behavior of three Iranian waste oils through a kinetic model and an experimental study. The experiments carried out in a micro-FB reactor, which is a good option for low emissions. Results showed that the reaction temperature and reaction rate are two of the most important factors for maximum conversion level of fuel. Results also showed an optimum value for reaction rate. The modeling results validated against the experimental measurements and found to be in good agreements.     

Prediction of asphaltene precipitation during gas injection

Maintaining the flow of multiphase fluid from the reservoir to the surface has been an important issue with wide economic importance for the petroleum industry. Asphaltene precipitation due to change in temperature, pressure, and composition of oil can adversely affect the oil flow to the surface by reducing the available diameter of the tubing. In this study, the precipitation of asphaltene from an Iranian crude oil was investigated. To do our study, through information about asphaltene instability in the live oil during both natural depletion and gas injection conditions about oil sample from Iranian oil field was gathered. Then, the solid model and scaling model were utilized to predict the weight percent of precipitated asphaltene at a wide range of the pressure and temperature. Results of the work revealed that both models predict the increase in weight percent of precipitated asphaltene when lean gas injected to the live oil at the maximum point of asphaltene instability. In addition, the study showed that both models are capable of predicting the experimental data of asphaltene precipitation; while scaling modeling is more reliable when the gas is injected to the oil.     

Effect of metal loading on catalytic activity and selectivity of ZSM-5 zeolite catalyst in conversion of methanol to olefins and aromatics

Effect of ZSM-5 zeolite promotion using potassium, strontium, and cerium metals on conversion of methanol to light olefins and aromatics was investigated. ZSM-5 catalyst was promoted using wet impregnation of metal salts and its activity was tested in methanol to hydrocarbons process under optimum operational condition obtained in our group previously. Zeolite samples were characterized by X-ray powder diffraction, scanning electron microscopy, N₂ adsorption-desorption, acid sites distribution, and strength using temperature programmed desorption of NH₃. Results showed that presence of these metals could significantly affect acid site distribution and therefore influence the catalyst activity and selectivity to olefins and aromatics.     

Adsorptive desulfurization and denitrogenation of model fuel by mesoporous adsorbents (MSU-S and CoO-MSU-S)

Adsorption of heterocyclic sulfur- and nitrogen-containing compounds by mesostructure adsorbent (MSU-S) and its modified form with cobalt oxide is studied using model fuel. The results of characteristic tests (XRD, N₂ adsorption–desorption, FTIR, and SEM) indicate that CoO impregnation causes a negative impact on mesoporous structure, crystalline phase, and particle shape along with a positive effect on surface ion exchange. CoO modification increased the adsorption loadings of DBT and BT to about 33.6% and 45.7%, respectively. For nitrogen compounds adsorption with the model fuel, adsorption loadings of quinoline and carbazole increase by 6.7% and 8.6%, respectively. Data fitting for carbazole, DBT, and BT is achieved better by the Langmuir model than the Freundlich model, and the data of quinoline fitted very well to the Freundlich model for CoO-MSU-S.     

Predicting the compressibility factor of natural gas

Knowing compressibility factor (z-factor) values of natural gases is the basis of most petroleum engineering calculations. Shortage of available experimental data for the specified composition, temperature, and pressure conditions encourages researchers to propose efficient equations for calculating z-factor values.

This investigation presents a useful empirical model for determining natural gases compressibility factor values. The advantages of this correlation are that it is explicit in terms of z-factor and the results of calculating compressibility factor values by this method reveal the supremacy of the new equation over the other widely used correlations.     

Viscosity estimation of mixed oil using RBF-ANN approach

Diluting the bitumen and heavy oil with a liquid solvent such as tetradecane is one way to decrease the viscosity. The accurate estimation for the viscosity of the aforesaid mixture is serious due to the sensitivity of enhanced oil recovery method. The main aim of this study was to propose an impressive relation between the viscosity of heavy n-alkane and Athabasca bitumen mixtures based on pressure, temperature, and the weight percentage of n-tetradecane using radial basis function artificial neural network (RBF-ANN). Also, this model has been compared with previous equations and its major accuracy was evidenced to estimate the viscosity. The amounts of mean relative error (MRE %) and R-squared received 0.32 and 1.00, respectively. The endeavors confirmed amazing forecasting skill of RBF-ANN for the approximation of the viscosity as a function of temperature, pressure, and the weight percentage of n-tetradecane.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

A novel algorithm to study the impact of the mismatch on analog building blocks: a case study in basic 35 nm CMOS amplifiers

In this paper, the context of modeling of the impact of mismatch and statistical variations on analogue circuit building blocks is emphasized. The aim is to develop a new algorithm which predicts the statistical behavior of important parameters of an amplifier including output resistance, voltage gain and trans-conductance. The relative error of standard deviation of statistical parameters will remain less than 5% compared with the most accurate Monte-Carlo (MC) simulations using atomistic library model-cards. In comparison with other models which are based on the normal distribution of parameters, the proposed model does not need this limiting presumption. On the other hand, the proposed algorithm is more efficient compared with time consuming MC atomistic simulations.     

Study of Physically Transient Insulating Materials as a Potential Platform for Transient Electronics and Bioelectronics

Controlled degradation and transiency of materials is of significant importance in the design and fabrication of degradable and transient biomedical and electronic devices and platforms. Here, the synthesis of programmable biodegradable and transient insulating polymer films is reported, which have sufficient physical and chemical properties to be used as substrates for the construction of transient electronics. The composite structure can be used as a means to control the dissolution and transiency rate of the polymer composite film. Experimental and computational studies demonstrate that the addition of gelatin or sucrose to a PVA polymer matrix can be used as a means to program and either slow or enhance the transiency of the composite. The dissolution of the polymer composites are fitted with inverse exponential functions of different time constants; the lower time constants are an indication of faster transiency of the polymer composite. The addition of gelatin results in larger time constants, whereas the addition of sucrose generally results in smaller time constants.     

Improving the Reliability of Software-Defined Networks with Distributed Controllers Through Leader Election Algorithm and Colored Petri-Net

Wireless Personal Communications - Software-Defined Networks (SDNs) are developed to compensate the complicated function of the controlling parts of the given network elements and making the...