Supramolecular Poly(cyclotriphosphazene) Functionalized Graphene Oxide/Polypropylene Composites with Simultaneously Improved Thermal Stability,Flame Retardancy,and Viscoelastic Properties

A novel crosslinkable supramolecular poly(cyclotriphosphazene) functionalized graphene oxide (FGO) is synthesized and melt‐processed with polypropylene (PP), which results in a PP composite with simultaneously improved flame retardancy, smoke‐suppression, and thermal and viscoelastic properties. The cone‐calorimetry test results reveal that the peak heat‐release rate and total heat release of the composite (2 wt% FGO) are reduced by 39.7% and 29.9%, respectively, compared to those of the neat PP. Meanwhile, the total smoke released and total smoke production of PP are significantly (42.7% and 34.9%, respectively) reduced after composite formation with 2 wt% FGO. Similarly, the PP/FGO composite shows an improved maximum weight loss temperature of 392.4 °C, compared to that of neat PP (361.4 °C). Thermogravimetric Fourier‐transform infrared spectroscopy (TG‐FTIR) analysis further confirms that the composite reduces the evolution of the flammable components and toxic gases, especially CO gas, indicating that the FGO significantly decreases the fire hazards of the PP. The thermomechanical and melt‐rheological analyses reveal that the composite has higher mechanical stiffness and viscoelastic properties than the neat polymer. In summary, FGO is shown to have potential as an advanced additive to obtain PP composites with multifunctional properties; however, higher FGO loading would be needed to improve UL‐94 rating from V‐2 to V‐0.     

Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite

This research explores mechanical and high velocity impact response of hybrid long carbon/glass fiber-reinforced polypropylene thermoplastic composites (HLFT) with different fiber lengths. The work examines three hybrid long fiber thermoplastic composites, i.e., 5, 10 and 20 mm. The HLFTs were prepared by a combination of extrusion and pultrusion processes and using a cross-head die. Tensile and Izod impact tests were carried out to evaluate the mechanical performance of each HLFT compound. A gas gun with a spherical projectile was used to conduct high velocity impact tests at three velocities of 144, 205 and 240 m/s. The results showed that internal mixing operation caused extensive reduction in fiber length of all three LFT lengths. Tensile strength, modulus and Izod impact test results were the indications of higher values with increase in HLFT length. Comparison of these results for the HLFT with that of corresponding glass/PP LFTs, adopted from earlier work by Shayan Asenjan et al. (J Compos Mater 53:353–360, 2019), showed better performance of HLFT. The high velocity impact results showed a steady higher impact performance with the increase in HFLT fiber length for all impact velocities tested. Comparison of HLFT high velocity impact performance revealed better results for all impact velocities tested with that of the corresponding glass/PP LFT composite.     

Halloysite Nanotubes Modified by Fe3O4 Nanoparticles and Applied as a Natural and Efficient Nanocatalyst for the SymmetricalHantzsch Reaction

Halloysite as an impressive natural eco-friendly nanotube with aluminosilicate structure has been investigated recently due to its unique features such as specific morphology and excellent bio-adaptability. In this research, Fe₃O₄ nanoparticles have been loaded on the tubular halloysite by co-precipitation method in order to synthesis magnetic halloysite (Hal-Fe₃O₄₎. To characterize this recoverable nanocatalyst, applicable analyses such as Fourier-transform infrared (FT-IR) spectroscopy, energy-dispersive X-ray (EDX) analysis, field-emission scanning electron microscopy (FE-SEM) images, X-ray diffraction (XRD) pattern, Thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM) curves have been carried out. The results confirmed that Fe₃O₄ nanoparticles with cubic structure, and uniform distribution, were located at halloysite nanotubes (HNTs). This aluminosilicate nanocomposite with high thermal stability, crystalline structure, and stable morphology was evaluated as a heterogeneous catalyst in the symmetrical Hantzsch reaction for the first time. Easy synthesis process, green media, high performance, recoverable catalyst and reusing of the Hal-Fe₃O₄ as a nanocatalyst for 8 times are the main features of this protocol.

     

Seismic microzonation and building vulnerability assessment based on site characteristic and geotechnical parameters by use of Fuzzy-AHP model (a case study for Kermanshah city)

ABSTRACT

On 12th November 2017, an earthquake with a magnitude of 7.3 Richter scale in the town of Sarpol-e Zahab took place that caused lots of human casualties and devastation. After the incident, issues related to the probability of an earthquake with equal intensity and extents of similar building destruction were raised in Kermanshah city. Therefore, a seismic microzonation map of Kermanshah city has been prepared based on the geotechnical, geological, and geophysical data, and the data were analysed using Fuzzy analytic hierarchy process (AHP). In the next step, the vulnerability analysis of city buildings was carried out based on the ground-shaking map, vulnerability curves, and statistical data regarding the buildings. The results of the vulnerability rate of residential buildings indicate that 80% of residential buildings would be exposed to vulnerability from low to moderate. However, other buildings would suffer 2% fully destruction (D1), 7% very high destruction (D2) and 11% high destruction (D3), respectively. Finally, according to the obtained results, the proposed model is verified with the help of the data and observations from the Sarpol-e Zahab earthquake, which reveals that the model is in good agreement with the actual earthquake data.     

Effect of light intensity and frequency of flashing light from blue light emitting diodes on astaxanthin production by Haematococcus pluvialis

Flashing light from blue light emitting diodes is an effective method for the reduction of energy consumption in the bioproduction of astaxanthin by Haematococcus pluvialis. We investigated the effects of light intensity and frequency on the final astaxanthin concentration in bioproduction by H. pluvialis grown mixotrophically. The final astaxanthin concentration under illumination with flashing light, with frequencies ranging from 25 to 200 Hz, was dependent on the light intensity and on the duty cycle and was equivalent, or higher, in comparison with that under illumination with continuous light at the same incident intensity. The light intensity determined the maximum attainable concentration of astaxanthin under continuous illumination. Under illumination with flashing light, the ratio of the final astaxanthin concentration to the maximum concentration at a specific light intensity was correlated to the duty cycle in the frequency range from 25 to 200 Hz. The effect of lower frequencies on enhanced astaxanthin production under flashing light was also studied; at levels as low as 1 Hz, higher final astaxanthin concentrations were observed under flashing light compared to concentrations attained under continuous light.     

New kinetic models for the crystallization of anatase nanoparticles from amorphous titania (TiO2)

In this article, amorphous Titania (TiO₂) nanoparticles were crystallized both in a solution environment and by a dry heat treatment using new kinetic models with the capabilities of more accurately predicting the polymorphic transformation behavior of TiO₂. In these models, both the nucleation and growth processes were simultaneously taken into account. The results were indicative of the Surface Nucleation (SN) of anatase occurring in a hydrothermal treatment process through the phase transformation. Also, both the surface and interface nucleation processes were found to play significant roles in the phase transformation kinetics when dealing with dry heat treatments at low temperatures. The proposed models were advantageous to any other published models, in which the nucleation mechanisms had been incorporated with suitable growth expressions. In other words, no experimental data of a particle size were required to investigate the phase transformation kinetics of TiO₂ nanoparticles in the models presented in this article.     

Comparing the Effects of Microwave and Conventional Heating Methods on the Evaporation Rate and Quality Attributes of Pomegranate (<Emphasis Type="Italic">Punica granatum</Emphasis> L.) Juice Concentrate

Pomegranate juice was concentrated by conventional heating and microwave heating at different operational pressures (12, 38.5, and 100 kPa), and their effects on evaporation rate and quality attributes of concentrated juice were investigated. The final juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa, respectively, by using conventional heating. Applying microwave energy decreased required times to 118, 95, and 75 min. The changes in color, anthocyanin content, and antioxidant capacity during concentration processes were investigated. L*, a*, and b* parameters were measured to estimate the intensity of color loss. All Hunter color parameters decreased with time. Results showed that the degradation of color, anthocyanins, and antioxidant activity were more important in conventional heating compared to microwave heating method. Degradation rates increases by increasing process pressure. A first-order kinetics model was applied to modeling changes in total solid content, anthocyanin content, and antioxidant capacity.     

Authenticity Assessment of Extra Virgin Olive Oil: Evaluation of Desmethylsterols and Triterpene Dialcohols

Extra virgin olive oil (EVOO) has a long history of economic adulteration, the detection of which presents significant challenges due to the diverse composition of cultivars grown around the world and the limitations of existing methods for detecting adulteration. In this study, using Method COI/T.20/Doc. No. 30/Rev. 1 of the International Olive Council, the authenticity of 88 market samples of EVOO was evaluated by comparing total sterol contents, desmethylsterol composition, and contents of triterpene dialcohols (erythrodiol and uvaol) with purity criteria specified in the United States Standards for grades of olive oil and olive‐pomace oil. Three of the 88 samples labeled as EVOO failed to meet purity criteria, indicating possible adulteration with commodity oil and/or solvent‐extracted olive oil. Detection of adulteration was also evaluated by spiking an EVOO sample with commodity oil at the 10 % level. As expected, eight of the spiked samples (canola, corn, hazelnut, peanut, safflower, soybean, and sunflower oils, and palm olein) failed to meet purity criteria. Two of the three samples spiked with 10 % hazelnut oil went undetected for adulteration. Overall, a low occurrence rate of adulteration (<5 %), based on purity criteria for desmethylsterols and triterpene dialcohols, was detected for the 88 products labeled as EVOO.     

Nonisothermal suspension polymerization of vinyl chloride for enhanced productivity

In the present study, a mathematical model is developed to numerically predict nonisothermal batch suspension polymerization of vinyl chloride. Free volume theory was used to consider diffusion‐controlled reactions. Model predictions were validated against field data obtained in a pilot scale stirred tank reactor. Variable temperature trajectory was considered during the course of the reaction to improve productivity by reducing the polymerization time for a certain conversion. Variable temperature during the course of the polymerization was successfully implemented by considering the predefined K value. By using variable temperatures during the course of the reaction, the density of the short branches per 1,000 monomer units as a criterion for structure defect remained relatively unchanged. Maximum reduction in reaction time relative to the isothermal case with the same K value and final conversion was 44% for the best temperature trajectory. J. VINYL ADDIT. TECHNOL., 22:470–478, 2016. © 2015 Society of Plastics Engineers