Optimization of Ozonation Process for Disinfection of Dental Unit Waterlines Using Response Surface Methodology

ABSTRACT

The reduction of microbial contamination in dental unit waterlines (DUWLs) appears to be necessary because of a potential risk of infections in immunocompromised patients and medical staff, which are regularly exposed to water and aerosols generated from DUWLs. In the present study, the qualitative and quantitative microbial contamination of water in DUWLs were determined and the conventional biomedical diagnostic tests were applied to identify microorganisms. A 3-level, 2-factor central composite design was utilized to investigate the effects of chief operating parameters and optimize ozone disinfection conditions. Also, the activity of three disinfectant (ozone, NaOCl, and peracetic acid) in microbial decontamination of DUWLs were compared. The results indicated that Microbacterium laevaniformans were the most prevalent genera (21%) among both Gram-negative and positive species in all samples. Regression analysis illustrated the good fit of the experimental data to the predicted model with R² and R²_adj correlation coefficients of 0.988 and 0.980, respectively. Moreover, under the optimal circumstances (Ozone concentration = 1.2 ppm and reaction time = 13.5 min) the disinfection efficiency was 97.52%. The results also revealed that ozone was effective disinfectant to reduce prevalent genera (with the removal of 93.75%, 92.57% and 96.15% of Pseudomonas aeruginosa, Microbacterium ?laevaniformans, and Alcaligenes faecalis, respectively) and already formed biofilms under optimum conditions. Based on achieved results, ozone was highly effective on microbial decontamination compared to peracetic acid and NaOCl disinfectant and can be used for disinfection of DUWLs.     

Mechanical modeling of silk fibroin/TiO2 and silk fibroin/fluoridated TiO2 nanocomposite scaffolds for bone tissue engineering

Biocompatible and biodegradable three-dimensional scaffolds are commonly porous which serve to provide suitable microenvironments for mechanical supporting and optimal cell growth. Silk fibroin (SF) is a natural and biomedical polymer with appropriate and improvable mechanical properties. Making a composite with a bioceramicas reinforcement is a general strategy to prepare a scaffold for hard tissue engineering applications. In the present study, SF was separately combined with titanium dioxide (TiO₂) and fluoridated titanium dioxide nanoparticles (TiO₂-F) as bioceramic reinforcements for bone tissue engineering purposes. At the first step, SF was extracted from Bombyx mori cocoons. Then, TiO₂ nanoparticles were fluoridated by hydrofluoric acid. Afterward, SF/TiO₂ and SF/TiO₂-F nanocomposite scaffolds were prepared by freeze-drying method to obtain a porous microstructure. Both SF/TiO₂ and SF/TiO₂-F scaffolds contained 0, 5, 10, 15 and 20 wt% nanoparticles. To evaluate the efficacy of nanoparticles addition on the mechanical properties of the prepared scaffolds, their compressive properties were assayed. Likewise, the pores morphology and microstructure of the scaffolds were investigated using scanning electron microscopy. In addition, the porosity and density of the scaffolds were measured according to the Archimedes’ principle. Afterward, compressive modulus and microstructure of the prepared scaffolds were evaluated and modeled by Gibson–Ashby’s mechanical models. The results revealed that the compressive modulus predicted by the mechanical model exactly corresponds to the experimental one. The modeling approved the honeycomb structure of the prepared scaffolds which possess interconnected pores.

     

An investigation into the impact of daylight on perceived color of façade: Understanding the role of chromaticness

Color selection has always been a classic problem in exterior color design for the simple reason that façade color is commonly chosen at the architect's office, regardless of different external conditions affecting color perception. This issue often leads to an apparent discrepancy between the selected color and the perceived color of façade. So far, extensive research has been carried out to identify, classify, and study the influence of these conditions on perceived color. However, little attention has been paid to the importance of color attributes. Hence, this article attempts to grasp better the significance of chromaticness, as briefly discussed in earlier studies, in the variation pattern of perceived color while daylight condition differs. In order to determine perceived color, each test subject was asked to compare the color seen on the façade to the standard color samples of natural color system index and choose the matching one, using a designed color‐measuring device. The results obtained from 93 participants demonstrate 3 things: First, they further support the belief that perceived color is influenced in both hue and nuance under varied daylight circumstances. Second, they confirm previous findings that indicated chromaticness would affect the extent of color shifts. And above all, a comparison of the results reveals that façade colors of higher chromaticness values have had less shifts in hue, yet greater shifts in whiteness. Finally, the findings suggest that chromaticness together with the external conditions, under which the color is to be seen, should be carefully considered when selecting the façade color.     

Preparation of polypyrrole/ferrocyanide films modified carbon paste electrode and its application on the electrocatalytic determination of ascorbic acid

Functionalized polypyrrole film were prepared by incorporation of (Fe(CN)₆)⁴⁻ as doping anion, during the electropolymerization of pyrrole onto a carbon paste electrode (CPE) in aqueous solution by using potentiostatic method. The electrochemical behavior of the (Fe(CN)₆)³⁻/(Fe(CN)₆)⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry and double step potential chronoamperometry methods. In this study, an obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole/ferrocyanide films modified carbon paste electrode (Ppy/FCNMCPEs) was demonstrated by oxidation of ascorbic acid. It has been found that under optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such electrode occurs at a potential about 540 mV less positive than unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and catalytic reaction rate constant, k_h′, were also determined by using various electrochemical approaches.The catalytic oxidation peak current showed a linear dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 4.5×10⁻⁴ to 9.62×10⁻³ M of ascorbic acid with a correlation coefficient of 0.9999. The detection limit (2σ) was determined as 5.82×10⁻⁵ M.     

Application of response surface methodology for optimization of purge gas recycling to an industrial reactor for conversion of CO2 to methanol

Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methanol production unit, which are approximately15.018 t·h~(-1) in the largest methanol production complexes in the world, can be recycled to the reactor and utilized for increasing the production rate. Purge gas streams contain 63% hydrogen,20% carbon monoxide and carbon dioxide as reactants and 17% nitrogen and methane as inert. The recycling effect of beneficial components on methanol production rate has been investigated in this study. Simulation results show that methanol production enhances by recycling just hydrogen, carbon dioxide and carbon monoxide which is an effective configuration among the others. It is named as Desired Recycle Configuration(DRC) in this study. The optimum fraction of returning purge gas is calculated via one dimensional modeling of process and Response Surface Methodology(RSM) is applied to maximize the methanol flow rate and minimize the carbon dioxide flow rate. Simulation results illustrate that methanol flow rate increases by 0.106% in DRC compared to Conventional Recycle Configuration(CRC) which therefore shows the superiority of applying DRC to CRC.     

Preparation,characterization and performance studies of polyethersulfone (PES) - pyrolytic carbon (PyC) composite membranes

Polyethersulfone (PES) is one of the most common polymers used to manufacture membranes. This work focuses on introducing and developing a novel polymer-based membrane applicable in the bio-artificial pancreas. The novel membrane based on the mixture of PES and Pyrolytic carbon (PyC) was studied and compared to PES as a reference. The PES/PyC blend membranes were characterized by top surface SEM, cross section SEM, AFM, contact angle pure water flux, insulin rejection, rejection of immune cells and molecules, and insulin diffusivity performance. In addition, the porosity of the membranes, mean pore size and mean pore density were also measured. The AFM and SEM images indicate that addition of synthesized PyC in the casting solution results in a membrane with high surface and sub-layer porosity and the addition 0.1 wt.% PyC to the casting solution reduced the surface roughness from 22.4 nm to 4.8 nm. The contact angle measurements reveal that the hydrophobicity of pure PES membrane enhanced with increasing the PyC concentration in the casting solution. With the increase of PyC from 0.0 wt.% to 0.1 wt.% in the casting solution, pure water flux reduces from 184 to 153 (L/m²h), insulin rejection reduces from 12 to 9.3%, rejection of immune cells and molecules reduce from 91.8 to 83% and insulin diffusivity increased from1.22E-8 to 1.46E-8. Furthermore, the resulting numbers for the mean pore size, mean pore density, and porosity of the PES-PyC(0.1 wt.%) membrane indicate a considerable improvement compared to pure PES membrane with increasing from 5.5 nm to 7 nm, 26 to 43 pores/area (area stand for the size of membrane surface in which pores were counted), and 68.3% to 84.6%, respectively. At the end, the statistical analysis was performed.     

Crystallization,mechanical, and optical properties of transparent,nanocrystalline gahnite glass‐ceramics

This paper describes the preparation of a transparent glass‐ceramic from the SiO₂‐K₂O‐ZnO‐Al₂O₃‐TiO₂ system containing a single crystalline phase, gahnite (ZnAl₂O₄). TiO₂ was used as a nucleating agent for the heat‐induced precipitation of gahnite crystals of 5‐10 nm. The evolution of the ZnAl₂O₄ spinel structure through the gradual formation of Al‐O bonds was examined by infrared spectroscopy. The dark brown color of the transparent precursor glass and glass‐ceramic was eliminated using CeO₂. The increase in transparency of the CeO₂‐doped glass and glass‐ceramics was demonstrated by UV‐visible absorption spectroscopy. EPR measurements confirmed the presence of Ce³⁺ ions, indicating that CeO₂ was effective in eliminating the brown color introduced by Ti³⁺ ions via oxidation to Ti⁺⁴. The hardness of the glass‐ceramic was 30% higher than that of the as‐prepared glasses. This work offers key guidelines to produce hard, transparent glass‐ceramics which may be potential candidates for a variety of technological applications, such as armor and display panels.     

TiO2–BaTiO3 nanocomposite for electron capture in dye‐sensitized solar cells

Different compositions of TiO₂–BaTiO₃ nanocomposites are synthesized with various weight ratios for dye‐sensitized solar cell (DSSC) applications. TiO₂ and BaTiO₃ nanoparticles (NPs) are synthesized by sol‐gel and solvothermal methods, respectively and are employed as the photoanode electrodes. BaTiO₃ NPs have pure cubic perovskite crystal structure with an average size of 20‐40 nm, while TiO₂ NPs show pure anatase phase with 15‐30 nm size. The power conversion efficiency (PCE) enhancement of the cells is first attained by controlling the thickness of the films for light harvesting improvement. The fabricated DSSC composed of pure BaTiO₃ NPs with an optimal thickness of 25 μm shows efficiency of 6.83%, whereas that made of pure TiO₂ NPs with 14 μm thickness has cell efficiency of 7.24%. Further improvement of cell efficiency is achieved by preparation of binary oxide nanocomposites using TiO₂ and BaTiO₃ NPs with various weight ratios. The highest PCE of 9.40% is obtained for the nanocomposite with TiO₂:BaTiO₃=85:15 (wt%). The enhancement is assigned to less recombination of photo‐generated electrons and higher incident photon to current conversion yield as a result of rapid charge collection and higher dye sensitization.     

Modification of Low-surface Energy Fibers used as Reinforcement in Cementitious Composites: A Review

This paper provides a review on the surface modification of low-surface energy fibers (polypropylene, polyethylene, and nylon) and discusses on the effects of these treatments toward the physical/mechanical properties of cement-based composite materials. These properties include the tensile, flexural, compressive strength and toughness, stress–strain behavior, modulus of elasticity, and workability. The effects of these treatments on the changes in the fiber/cement matrix interfacial properties are also presented. Studies have shown that various surface treatments have been used to improve the efficiency of the low-surface energy synthetic fibers in the cementitious composites. The modifications are on the basis of physical, chemical, and mechanical methods. The main achievements found have been the development of fibers with modified surface to optimize fiber–matrix adhesion. Moreover, the recently developed surface modifications will allow obtaining high-performance cementitious materials reinforced with the synthetic fibers.     

Study of phase behavior and Congo red dye partitioning in aqueous two-phase systems composed of hydrophilic alcohols (1-propanol/ 1-butanol) and sodium salts

ABSTRACT

The partitioning of the Congo red dye in ATPSs formed by alcohols (1-butanol, 1-propanol)/sodium salts was considered. Binodal and the LLE data were experimentally determined at 298.15 K. The salting-out abilities of the salts follow the order Na₃C₆H₅O₇ > NaH₂PO₄ > C₂H₃ O₂Na. The phase-forming abilities of the alcohols follow the order: 1-butanol > 1-propanol. The four-parameter equation was applied to correlate the binodal curves data. Therefore, The Bancroft and Othmer-Tobias equations were used to prove the reliability of the corresponding LLE data. ATPS composed of 6.5% of 1-butanol and 20% of Na₃C₆H₅O₇ had the highest values of extraction by the yield of 98.54%.