Emergy-based life cycle assessment (Em-LCA) for sustainability appraisal of infrastructure systems: a case study on paved roads

Civil infrastructure systems are critical assets that are subjected to damage, service-life deterioration, and increasing maintenance and rehabilitation cost. Effective infrastructure management and principles of sustainable development can help to find an optimal compromise between economic growth and environmental protection for all stakeholders. Colloquially, sustainability refers to meeting triple-bottom-line (TBL) performance objectives including environmental protection, economic prosperity, and social acceptability and equity as a result of short- and long-term policy decisions. In this paper, a comprehensive framework based on the integration of emergy synthesis and life cycle assessment (LCA) has been investigated for a public infrastructure system. The main purpose of the applied method, emergy-based LCA (Em-LCA), is to facilitate an informed decision making process for different asset management scenarios, by identifying and quantifying the attributes of TBL impacts over the life cycle of a civil infrastructure system. As a case study, Em-LCA framework has been applied to evaluate the sustainability of two different scenarios for a road construction project in interior British Columbia, Canada. The results indicate that Em-LCA offers a good understanding to address sustainability issues in infrastructure systems and provides quantitative and transparent results to facilitate informed decision making for asset management.     

WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

Consumer perception of boar meat as affected by labelling information,malodorous compounds and sensitivity to androstenone

This study aimed to assess the influence of two label conditions on the acceptance of boar meat. A central location test was conducted with 145 consumers each assessing 4 pieces of pork loin.     

A crossover‐UNIQUAC model for critical and noncritical LLE calculations

A new model, named the crossover‐UNIQUAC model, has been proposed based on the crossover procedure for predicting constant‐pressure liquid–liquid equilibria (LLE). In this manner, critical fluctuations were incorporated into the classical UNIQUAC equation. Coexistence curves were estimated for systems having a diverse range of asymmetries. These systems included the LLE of five different mixtures, composed of nitrobenzene with one of the members of the alkane homologous family (either pentane, octane, decane, dodecane, or tetradecane), as well as an extra system having a different chemical nature, namely the mixture of n‐perfluorohexane and hexane, to further check the validity of the proposed approach. Using these nonideal mixtures, the validity of the new model was investigated within wide ranges, covering near‐critical to regions falling far away from the critical point. The graphical trends, as well as the quantitative comparison with experimental data indicated the good agreement of the proposed model results with the experimental data. A maximum AARD% value of 3.97% was obtained in calculating molar compositions by the proposed model for such challenging systems covering noncritical, as well as critical regions. In addition, to show the strength of the proposed crossover approach to describe properties other than LLE, molar heat capacities were investigated for the system of nitrobenzene + dodecane. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3094–3103, 2015     

Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications

A hydroxyapatite (HA) particulate reinforced ultrahigh molecular weight polyethylene (UHMWPE) nanocomposite is fabricated by internal mixer at 180°C and using of paraffin oil as a processing aid to overcome the high viscosity of melted UHMWPE. The reinforcing effects of nano‐HA are investigated on nanomechanical properties of HA/UHMWPE nanocomposites by nanoindentation and nanoscratching methods. Results show that the nanocomposite with 50 wt % nano‐HA exhibits a Young's modulus and hardness of 362.5% and 200% higher, and a friction coefficient of 38.86% lower than that of pure UHMWPE, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42052.     

Copper (I) ion stabilized on fe3o4‐core ethylated branched polyethyleneimine‐shell as magnetically recyclable catalyst for ATRP reaction

Branched polyethyleneimine (bPEI) was used to modify the surface of Fe₃O₄ nanoparticles coated with silica layer, and then, it was treated with ethyl iodide to prepare Fe₃O₄@SiO₂@Ethylated‐bPEI. In the next step, the yolk–shell structure was gained by selectively etching the SiO₂ middle layer. Finally, copper(I) was introduced to the yolk–shell Fe₃O₄@Ethylated‐bPEI and the activity of the catalyst was evaluated for atom transfer radical polymerization (ATRP) of styrene, led to obtain the well‐defined polymer with relatively low polydispersity. The toxicity of the residual copper in the polymer product was a limiting issue for applicability of ATRP reactions especially for biological purposes. In this report, the copper content in the polymer was reduced to the excellent value of 1.1 ppm. Moreover, the magnetic isolation, recyclability, and remove the need for an external ligand were other advantages of the synthesized catalyst which makes it suitable for employing in ATRP reactions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42337.     

Time–cost optimization: using GA and fuzzy sets theory for uncertainties in cost

Uncertainties should be considered in any time–cost trade‐off problems when minimizing project cost and duration, which leads to the so‐called stochastic time–cost trade‐off problem. A new approach to investigate stochastic time–cost trade‐off problems employing fuzzy logic theory is presented. The proposed approach fully embeds the fuzzy structure of the uncertainties in total direct cost into the model. An appropriate GA is used to develop a solution to the multi‐objective fuzzy time cost model. The accepted risk level of the project manager is defined through α cut approach for which a separate Pareto front with set of non‐dominated solutions has been developed. To compare the alternative set of options for any assumed project duration, associated fuzzy costs for different values of α cut are ranked employing two appropriate approaches for fuzzy costs comparison. The proposed models are applied to solve two benchmark test problems. It is shown that the models facilitate the decision‐making process by selecting specified risk levels and employing the associated Pareto front.     

Plastic hinge length of reinforced concrete columns subjected to both far‐fault and near‐fault ground motions having forward directivity

In a strong earthquake, a standard reinforced concrete (RC) column may develop plastic deformations in regions often termed as plastic hinge regions. A plastic hinge is basically an energy dampening device that dampens energy through the plastic rotation of a rigid column connection, which triggers redistribution of bending moments. The formation of a plastic hinge in an RC column in regions that experience inelastic actions depends on the characteristics of the earthquakes as well as the column details. Recordings from recent earthquakes have provided evidence that ground motions in the near field of a rupturing fault can contain a large energy or ‘directivity’ pulse. A directivity pulse occurs when the propagation of the fault proceeds at nearly the same rate as the shear wave velocity. This pulse is seen in the forward direction of the rupture and can cause considerable damage during an earthquake, especially to structures with natural periods that are close to those of the pulse. In the present paper, 1316 inelastic time‐history analyses have been performed to predict the nonlinear behaviour of RC columns under both far‐fault and near‐fault ground motions. The effects of axial load, height over depth ratio and amount of longitudinal reinforcement, as well as different characteristics of earthquakes, were evaluated analytically by finite element methods and the results were compared with corresponding experimental data. Based on the results, simple expressions were proposed that can be used to estimate plastic hinge length of RC columns subjected to both far‐fault and near‐fault earthquakes that contain a forward‐directivity effect. Copyright © 2011 John Wiley & Sons, Ltd.