Performance of DS-CDMA over measured indoor radio channels usingrandom orthogonal codes

Direct sequence spread spectrum, with its inherent resistance to multipath interference, has become a commercial reality for indoor wireless communications and has been proposed for personal communication networks. To allow multiple users within the limited bandwidths allocated by the FCC, code-division multiple-access (CDMA) is needed. This paper analyzes the performance of CDMA systems using random orthogonal codes over fading multipath indoor radio channels using channel measurements from five different buildings. The effect of RAKE receiver structure is studied, as is the effect of average power control. The average probability of error as a function of signal-to-noise ratio is used as the performance criteria. Results are compared with models for Rayleigh fading channels     

Constraining Si Particles within Graphene Foam Monolith: Interfacial Modification for High‐Performance Li+ Storage and Flexible Integrated Configuration

Pulverization of electrode materials and loss of electrical contact have been identified as the major causes for the performance deterioration of alloy anodes in Li‐ion batteries. This study presents the hierarchical arrangement of spatially confining silicon nanoparticles (Si NPs) within graphene foam (GF) for alleviating these issues. Through a freeze‐drying method, the highly oriented GF monolith is engineered to fully encapsulate the Si NPs, serving not only as a robust framework with the well‐accessible thoroughfares for electrolyte percolation but also a physical blocking layer to restrain Si from direct exposure to the electrolyte. In return, the pillar effect of Si NPs prevents the graphene sheets from restacking while preserving the highly efficient electron/Li⁺ transport channels. When evaluated as a binder‐free anode, impressive cycle performance is realized in both half‐cell and full‐cell configurations. Operando X‐ray diffraction and in‐house X‐ray photoelectron spectroscopy confirm the pivotal protection of GF to sheathe the most volume‐expanded lithiated phase (Li₁₅Si₄) at room temperature. Furthermore, a free‐standing composite film is developed through readjusting the pore size in GF/Si monolith and directly integrated with nanocellulose membrane (NCM) separator. Because of the good electrical conductivity and structural integrity of the GF monolith as well as the flexibility of the NCM separator, the as‐developed GF/Si‐NCM electrode showcases the potential use in the flexible electronic devices.     

Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.     

Integrated Fuzzy DEA-ANFIS to Measure the Success Effect of Human Resource Spirituality

Workplace spirituality has gained attention as it is proven to be a contributor to organizational performance improvement. This paper aims to assess the impact of human resource spirituality on the success of organizational strategic change projects. The success of the projects is measured by the well-known criterion of deviation from the planned budget cost. Data collection is based on a questionnaire survey of 252 personnel in 36 large and medium-scale organizational change projects in power industry. The paper proposes an integrated algorithm of fuzzy data envelopment analysis (FDEA) and adaptive network-based fuzzy inference system (ANFIS) for measuring the pure effect of human resource spirituality on the success of organizational change projects in the power industry. It also achieves a verified tool capable of addressing complexity, nonlinearity, ambiguity, and fuzziness for measuring spirituality of human resources in the projects. Results show that spirituality of the project team has a significant effect on project success.     

Paired-wire carrying current actuators and piezoelectric beam sensors for microelectromechanical systems

Microsystem Technologies - An alternative actuator for MEMS/NEMS device is proposed and analyzed. The actuator is based on the paired-wires (PW) carrying current concept, which makes the actuator...     

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K [30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K [60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.     

Transmission pricing and recovery of investment costs in the deregulated power system based on optimal circuit prices

Transmission pricing has become a major issue in the discussions about the deregulated electricity markets.Conse-quently,open access to the transmission system is one of the basic topics to allow compe...     

Evaluation of Centrifugal Casting Process Parameters for In Situ Fabricated Functionally Gradient Fe-TiC Composite

A gradient Fe-TiC composite was successfully produced via combination of in situ reaction with centrifugal casting techniques. Additionally, some of the effective parameters of the centrifugal casting process have been studied. Cast iron and ferrotitanium, which were used as raw materials, were melted using a high-frequency induction furnace coupled with centrifugal equipment. The microstructure and phase characterization of the fabricated composite was studied by scanning electron microscopy, optical microscopy, and X-ray diffraction. The results show that the production of a pearlite matrix composite reinforced by TiC particles is feasible. The distribution of TiC in the pearlitic matrix is completely uneven as a result of density difference between molten medium and TiC in the centrifugal casting process.