A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. I. General concepts

We study the mechanical and conformational properties of networks of helical polymers with a combination of Monte Carlo simulations based on the Wang-Landau algorithm and the three-chain model. We find that the stress-strain behavior of these networks has novel features not observed in typical networks made of synthetic polymers. In particular, we find that as these networks are stretched they first strengthen, then soften and finally strengthen again. This non-monotonic behavior of the stress correlates with the one of the helical content and is rationalized by the elongation-induced formation and melting of the helical structure of the polymer. We complement these results with a study of other conformational properties of the polymer strands that clarify the molecular mechanisms behind the mechanical behavior of these networks. Finally, we present a qualitative comparison of some of our results with the theoretical ones recently reported by Kutter and Terentjev.     

Microcomputer Control of a Residential Photovoltaic Power Conditioning System

Microcomputer-based control of a residential photovoltaic power conditioning system is described. The microcomputer is responsible for array current feedback control, maximum power tracking control, array safe zone steering control, phase-locked reference wave synthesis, sequencing control, and some diagnostics. The control functions are implemented using Intel 8751 single-chip microcomputer-based hardware and software. The controller has been tested in the laboratory with the prototype power conditioner and shows excellent performance.     

Two interviews with Reik.

This article describes two interviews with Theodor Reik. Explored topics include Reik's relationship with Sigmund Freud, psychoanalytic literature, and the history of the psychoanalytic movement. The author concludes with an analysis of his impressions of Reik. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Florida DOT Project-Level Bridge Management Models

The Florida Department of Transportation (FDOT) is in the process of implementing Pontis, a Bridge Management System, to provide decision support to engineers in the headquarters and district offices as they make routine policy, programming, and budgeting decisions regarding the preservation and improvement of the state’s bridges. As part of this effort, an ongoing research program is underway to adapt the system to FDOT needs as well as to advance the state of the art in several areas important to the Department. Most of the research results are organized around a new project-level decision support framework that complements and builds on Pontis’ existing network-level analysis. Specific new models include accident risk and user cost due to roadway width and alignment deficiencies; user cost of load capacity and vertical clearance restrictions, and moveable bridge openings; project-level prediction models for bridge element condition and costs; and prediction of economics of scale and scoping possibilities. The new models are built into a highly graphical spreadsheet model for decision support use.     

The Effects of H2O, CO and CO2 on the H2 Permeance and Surface Characteristics of 1 mm Thick Pd80wt%Cu Membranes

The hydrogen permeance of 1 mm-thick Pd_80wt%Cu foils was measured in the presence of equimolar mixtures of H₂ with CO, CO₂ or H₂O over the temperature and total pressure ranges of 623–1,173 K and 0.62–2.86 MPa, respectively. In all cases, permeance losses at 623 and 738 K were very modest. At higher temperatures, more significant decreases in membrane permeance were observed with the highest reduction of about 50% occurring when macroscopic carbon deposition occurred on the membrane surface during H₂–CO exposure at 908 K. The more worrisome effects of exposure to these gases, however, were the micron-scale surface defects observed at 908 and 1,038 K. Although the 1 mm thick disk membranes retained their mechanical integrity, such defects could cause catastrophic failure of ultra-thin, Pd–Cu membranes (1–5 μm thick) deposited on porous substrates.     

Power sector development in India with CO2 emission targets: Effects of regional grid integration and the role of clean technologies

The power sector in India at present comprises of five separate regional electricity grids having practically no integrated operation in between them. This study analyses the utility planning, environmental and economical effects of integrated power sector development at the national level in which the regional electric grids are developed and operated as one integrated system. It also examines the effects of selected CO₂ emission reduction targets in the power sector and the role of renewable power generation technologies in India. The study shows that the integrated development and operation of the power system at the national level would reduce the total cost including fuel cost by 4912 million $, total capacity addition by 2784 MW, while the emission of CO₂, SO₂ and NO_x would be reduced by 231.6 (1.9%), 0.8 (0.9%), 0.4 (1.2%) million tons, respectively, during the planning horizon. Furthermore, the study shows that the expected unserved energy, one of the indices of generation system reliability, would decrease to 26 GWh under integrated national power system from 5158 GWh. As different levels of CO₂ emission reduction targets were imposed, there is a switching of generation from conventional coal plants to gas fired plants, clean coal technologies and nuclear based plants. As a result the capacity expansion cost has increased. It was found that wind power plant is most attractive and economical in the Indian perspective among the renewable options considered (Solar, wind and biomass). Copyright © 2003 John Wiley & Sons, Ltd.     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Relationships between urbanization and the oak resource of the Minneapolis/St. Paul Metropolitan area from 1991 to 1998

Urbanization was associated with loss and transformation of the oak forest in the Twin Cities (Minneapolis and St. Paul) metropolitan area (TCMA) over a recent 7-year interval. Between 1991 and 1998, urbanization increased based on several indicators: population density, area of developed land, and area of impervious surface—total impervious area and area within three classes of increasing degree of imperviousness (protected, affected, and degraded). We quantified relationships between changes in urbanization and changes in several parameters describing the oak forest at the scale of ecological subsection. Increased total and affected impervious area were strongly correlated with decreased area of oak forest when changes of the urbanization indicators and oak were expressed as percentages of the subsection area. Relationships were reversed when changes were expressed as percentages of the 1991 values. Increased population density was strongly correlated with increased loss in numbers and increased isolation of oak patches, but weakly correlated with loss of oak forest area. This is the first study to quantify relationships between changes in urbanization and changes in a specific forest cover type. Our results demonstrate complexities of urbanization impacts on a metropolitan forest resource, and highlight the importance of selected variables, spatial and temporal scales, and expressions of change when quantifying these relationships.     

Organic matter release in low temperature thermal treatment of biological sludge for reduction of excess sludge production.

Thermal treatment applied in association with a biological system allows for a significant reduction in excess sludge production (approximately 50%). In general, heat treatment is described as a sludge disintegration technique. This paper offers a thorough study on the impact of heat treatment, at temperatures below 100 degrees C, on the solubilisation of the sludge COD and its biodegradability. Discontinuous heating experiments were performed on activated and digested sludge. At all temperatures tested the released COD for digested sludge was systematically higher than that for activated sludge (15 and 40%, respectively, at 95 degrees C for 40 min of contact time). For the first 30 min, a 1st order kinetic, with respect to the residual COD, was systematically found. In the range of 40-95 degrees C, digested sludge had a lower activation energy than activated sludge (26 kcal/mol compared to 70-160 kcal/mol). COD solubilisation is thus more positively influenced by temperature in the case of activated sludge. This may be due to the significant difference in the ratio of protein/carbohydrate in digested and activated sludge (1-5 and 0.2-0.7, respectively). The increase in the COD/TKN ratio in the solubilised fraction after thermal treatment of activated sludge suggests a preferential solubilisation of proteins over carbohydrates. Respirometric tests performed on the solubilised COD showed that whatever the sludge origin, only 40-50% of released COD is biodegradable at a conventional hydraulic retention time (i.e., 24 h). Hence, heat treatment would act more through organic matter solubilisation rather than by a biodegradability increase.