Surface-mediated effects on porous polymer monolith formation within capillaries

The formation of a porous polymer monolith (PPM) is influenced by the physico-chemical properties of the wall surface of its container. This influence can have a dramatic effect on the resulting monolith morphology depending on the nature and composition of the wall. Indeed, a dense polymer layer or “sheath”, distinct from the bulk porous material, has been observed at the wall surface of capillaries, and thus a study was undertaken to explore the dependence of this layer on the hydrophobicity of the surface. A range of silanizing reagents were used to modify the surface of the fused silica capillary, including aminopropyl, trimethylsilyl, octadecyl and perfluorooctyl functionalities. Crosslinked butyl acrylate-based PPM was formed in the modified capillaries and extruded. SEM images of the monoliths were used to examine the sheath morphology and thickness, which are discussed with respect to surface hydrophobicity.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

A GENERALIZED APPROACH TO MODELING THE HIERARCHICAL MAXIMAL COVERING LOCATION PROBLEM WITH REFERRAL

ABSTRACT Several investigators have developed hierarchically structured maximal covering location problems, especially for hierarchies with two levels such as clinics and hospitals: Moore and ReVelle developed and applied a hierarchical covering model to a medical service delivery problem in Houduras; and Church and Falon developed two alternate model forms of hierarchical covering that were applied to a medical services planning, problem in Colombia. In this paper, we proposed a hybrid formulation that encompasses all three of these previous models and which allows for the trade-off of up of four different objectives. This new model formulation is also an improvement in that it has a significantly more efficient and compact structure, even while encompassing a more complete location problem, of which the three previous works are special cases. Example solutions are given for two different data sels involving regions in Colombia and Uganda. In addition, two further model formulations of a closely related nature are presented without computational results.     

Modelling and Simulation of a Direct Contact Rotary Dryer

A mathematical model able to predict solid and drying gas temperature and moisture content axial profiles along a direct contact rotary dryer was developed. The study was focused on the drying kinetics based on phenomenological models. Two different drying mechanisms in the decreasing drying rate period were tested: proponional to the unbound moisture content and moisture diffusion inside the particle. Experimental data collected in a pilot-scale direct contact rotary dryer was used to validate the model. Soya and fish meals were used as drying material.     

Synchronization properties of two coupled multisection semiconductor lasers emitting chaotic light

We present numerical simulations describing the dynamics of two multisection semiconductor lasers emitting in a chaotic regime coupled in a master-slave configuration. By changing the current of the passive section of the master laser, we observe a change in the maximum correlation between the outputs of the two systems. These devices are promising candidates for on-off phase-shift keying encryption.     

Lead-Ion Stability in Soda–Lime Lead Silicate Glasses

Sodium-calcium-lead silicate glass compositions were prepared over a wide compositional range by conventional glass-melting methods. The acid chemical stability of the glass structure was studied by corroding samples of glass in 4% acetic acid solution at 22°C for periods up to 24 h. Lead corrosion stability was evaluated by measuring lead concentrations in the corrosion solution. At short times, parabolic time dependence was observed and the parabolic time coefficients were regressed against composition, yielding a simple additive relationship. A similar model was fitted to 24-h release data, which showed compositional effects similar to the 2-h data. Of the oxides studied, sodium was the most detrimental to durability, and the coefficients of the oxides decreased in the series: Na₂O, PbO, CaO, SiO₂. The effects of the oxides could be partially explained by the number of nonbridging oxygens expected in the glass structure, and the residual effect was attributed to cation characteristics. Small phosphate additions to the glass greatly increased the lead-ion stability under nearly all experimental conditions examined.