线卡通信系统的基本构件

如今高性能通信系统有多种形式，在企业网络中，它也许是路由器，或是将以太局域网(LAN)的数据转发至OC-48 SONET光网络的多业务转换装置；在蜂窝网络中，它可能是第三代宽带无线网络控制器(RNC)，将基站(BTS)的移动蜂窝电话呼叫发送至公共交换电话网(PSTN)；在存储网络中，它可以是将服务器的数据备份至廉价磁盘冗余阵列(RAID)的光纤通道存储转换器。无论何种特殊类型的网络，这些系统的共同用途是接收来自信息源的数据，决定它需要发至何处，并有效地将它传送至目的地。为了支持这些关键功能，需要有一套通用通信元件或“基本构…     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

珠江三角洲土坝和堤围震害初步预测

本项预测采用概率方法,即首先根据广东省水利部门提出的55座土坝和59个重点的座标(见附图),进行概率地震危险性分析,给出它们在一定预测年限T(取50年和100年)的地震烈度Ⅰ的超越概率;其次根据近年我国发生的几次强震时处于不同烈度区内的土坝和堤防的震害资料,形成表示土坝和土堤地震易损性的震害概率矩阵;然后,根据上述两方面结果用概率公式评价各土坝和堤围点在预测年限内各震害等级的超越概率,并取10％超越概率为标准,估计震害等级。结果表明,珠江三角洲土工构筑物的地震危害性南部高于北部。     

Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006     

情浸丹青写名园——小谈郝永明的古建园林绘画艺术

郝永明古建园林绘画作品另辟蹊径，难能可贵。郝永明的画，不仅给我国美术宝库增加了一份积累，也给古建园林艺术增添了珍贵的资料。     

Automating manual reward systems

The introduction of Personal Computers has enabled Industrial Engineers to automate many aspects of their responsibilities, thus becoming significantly more productive. One aspect which clearly benefits from automation is the creation, implementation, and periodic maintenance of Pay-for-Performance Reward Systems. However, selecting the correct software package is not easy. Industrial Engineers currently have a variety of fully automated software packages to choose from which can range from $2,000 – $100,000. The initial cost alone may make it difficult to Justify for a small plant. Furthermore, if you have a variety of reward systems (Gainsharing - Small Group - One for One) finding a single program to handle all of them may be impossible.

This was a problem Norton Company faced five years ago. We are a fortune 500 company with manufacturing plants located throughout the world, using a variety of reward systems. To remain cost competitive in all aspects of our business, we had to find a way to reduce the on-going maintenance costs of our incentive systems.

Investigating alternatives uncovered a low cost, flexible solution to our problem. The use of off-the-shelf spreadsheet and data base software enabled us to fully automate all aspects of our reward systems.     

Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.