Phytochemical and Biological Studies of Agave attenuata

The present study was conducted to examine various biological activities of a methanol extract of Agave attenuata leaves. GC-MS analysis of the n-hexane fraction from the extract revealed the presence of 31 compounds, with mono-2-ethylhexyl phthalate (11.37%), 1,2-benzenedicarboxylic acid (6.33%), n-docosane (6.30%) and eicosane (6.02%) as the major components. The leaves contained appreciable levels of total phenolic contents (10.541-39.35 GAE, mg/100 g) and total flavonoid contents (43.35-304.8 CE, mg/100 g). The extract and some of its fractions showed moderate antimicrobial effects. Leaves extract and fractions also exhibited a good antioxidant potential when measured by DPPH radical scavenging activity and inhibition of lipid peroxidation assays. The hemolytic effect of the plant was found to be in a range of 1.01%-2.64%. From the present study it is concluded that this plant could be used as a source of natural antioxidants and functional food nutraceutical applications.     

Synthesis of Sulfur‐Based Biocompatible Nonionic Surfactants and Their Nano‐Vesicle Drug Delivery

Nonionic surfactants are capable of forming nano‐range vesicles upon self‐assembling in an aqueous medium. These vesicles are highly stable, low in toxicity, and cost‐effective. Owing to their ability to solubilize both hydrophilic and hydrophobic substances, they are of great interest for drug solubilization and delivery. This study describes the synthesis and characterization of two new nonionic surfactants and their screening for biocompatibility and drug loading potentials in nano‐scale niosomal vesicles. They were characterized through mass spectroscopy, ¹HNMR, and FT‐IR. Their critical micelle concentration (CMC) was investigated using UV–vis spectrophotometry. The biocompatibility study was carried out through blood hemolysis and in vitro cytotoxicity assays. The surfactants have very low CMC values, are highly hemo‐compatible, and were nontoxic when tested against a cell culture. They were able to form nano‐range niosomal vesicles with large variation in their size. Both new surfactants were able to encapsulate increased amounts of the drug, in this case clarithromycin. The chemical nature of the drug remained intact in the niosomal vesicles. The results suggest that these nonionic surfactants could be promising drug delivery vehicles.     

Recent Developments and Applications of Ionic Liquids in Gas Separation Membranes

Flue gas emissions and the harmful effects of these gases urge to separate and capture these unwanted gases. Ionic liquids due to negligible vapor pressure, thermal stability, and wide electrochemical stability have expanded its application in gas separations. A comprehensive overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation is given. The three general classifications of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed‐matrix membranes (ILMMMs) along with their applications, for the separation of various mixed gases systems is discussed in detail. Furthermore, issues, challenges, computational study, and future perspectives for ILMs are also considered.     

Water-Lubricated Ni-Based Composite(Ni-Al_2O_3,Ni-SiC and Ni-ZrO_2)Thin Film Coatings for Industrial Applications

In this work,pure nickel and Ni-based nanocomposite coatings(N1-Al_2O_3,Ni-SiC and Ni-ZrO_2) were produced on steel substrate by using pulse electrodeposition technique.The industrial performance tests were conducted to evaluate the wear resistance,corrosion resistance,adhesion strength and wettability behaviour of newly developed coatings.Rolling contact ball-on-disc tribometer was used to assess anti-wear behaviour of these coatings under waterlubricated contacts.The results showed that the wear- and corrosion resistance properties of nickel alumina and Ni-SiC composite coatings significantly improved than that of pure Ni and Ni-ZrO_2 coatings.The adhesion and wettability results of Ni-Al_2O_3 composite showed better performance when compared to the rest of the coatings.The effects of incorporating nanoparticles on the surface microstructure,interface adhesion and distribution of the particles were also investigated.The coatings were characterized by using scanning electron microscopy,X-ray diffraction analysis and 3D white light interferometry.The wear failure behaviour of these coatings was further examined by post-test surface observation under optical microscope.     

Effect of Cooling Rate on Microstructure and Mechanical Properties of Eutectoid Steel Under Cyclic Heat Treatment

A systematic study has been carried out to ascertain the effect of cooling rate on structure and mechanical properties of eutectoid steel subjected to a novel incomplete austenitization-based cyclic heat treatment process up to 4 cycles. Each cycle consists of a short-duration holding (6 min) at 775 °C (above A₁) followed by cooling at different rates (furnace cooling, forced air cooling and ice-brine quenching). Microstructure and properties are found to be strongly dependent on cooling rate. In pearlitic transformation regime, lamellar disintegration completes in 61 h and 48 min for cyclic furnace cooling. This leads to a spheroidized structure possessing a lower hardness and strength than that obtained in as-received annealed condition. On contrary, lamellar disintegration does not occur for cyclic forced air cooling with high air flow rate (78 m³ h^?1). Rather, a novel microstructure consisting of submicroscopic cementite particles in a ‘interweaved pearlite’ matrix is developed after 4 cycles. This provides an enhancement in hardness (395 HV), yield strength (473 MPa) and UTS (830 MPa) along with retention of a reasonable ductility (%Elongation = 19) as compared to as-received annealed condition (hardness = 222 HV, YS = 358 MPa, UTS = 740 MPa, %Elongation = 21).     

Ir(III) and Ru(II) Complexes in Photoredox Catalysis and Photodynamic Therapy: A New Paradigm towards Anticancer Applications

Individually, photoredox catalysis (PC) and photodynamic therapy (PDT) are well-established concepts that have experienced a remarkable resurgence in recent years, leading to significant progress in organic synthesis for PC and clinical approval of anticancer drugs for PDT. But, very recently, new photoredox catalyst systems based on Ir(III) and Ru(II) complexes have garnered significant interest because they can simultaneously be used as PDT agents apart from their demonstrated PC activity. This highlight discusses the unique PC behavior of emerging Ir(III)- and Ru(II)-based systems while also examining their potential PDT activity in cancer treatment.     

Effect of Varying Amount of Polyethylene Glycol (PEG-600) and 3-Aminopropyltriethoxysilane on the Properties of Chitosan based Reverse Osmosis Membranes

Chitosan and polyethylene glycol (PEG-600) membranes were synthesized and crosslinked with 3-aminopropyltriethoxysilane (APTES). The main purpose of this research work is to synthesize RO membranes which can be used to provide desalinated water for drinking, industrial and agricultural purposes. Hydrogen bonding between chitosan and PEG was confirmed by displacement of the hydroxyl absorption peak at 3237 cm⁻¹ in pure chitosan to lower values in crosslinked membranes by using FTIR. Dynamic mechanical analysis revealed that PEG lowers Tg of the modified membranes vs. pure chitosan from 128.5 °C in control to 120 °C in CS-PEG5. SEM results highlighted porous and anisotropic structure of crosslinked membranes. As the amount of PEG was increased, hydrophilicity of membranes was increased and water absorption increased up to a maximum of 67.34%. Permeation data showed that flux and salt rejection value of the modified membranes was increased up to a maximum of 80% and 40.4%, respectively. Modified films have antibacterial properties against Escherichia coli as compared to control membranes.     

Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.     

A selective organosilica membrane for ethyl acetate dehydration by pervaporation

Organosilica bis(triethoxysilyl) ethane (BTESE) membranes were explored for pervaporation dehydration of binary and ternary mixtures of ethyl acetate (EA) by undiluted sol coating combined with flash firing. Three BTESE membranes (M1, M2, and M3) were fabricated on macroporous supports by varying BTESE concentrations (0.5, 2.5, and 5 wt% BTESE, respectively) in polymer sols. The membranes were characterized by DLS, SEM, FTIR, XRD, contact angle, AFM, and pervaporation performance to discuss the effect of the BTESE contents in the polymer sol on the formation and dehydration performance of resulting organosilica membranes. It was found that 5 wt% loading of BTESE led to a highly selective membrane for dehydration of EA/H₂O mixture. Among the synthesized membranes, M3 delivered flux of 0.84 ± 0.05 kg.m⁻².h⁻¹ with a selectivity of >10,000 for EA/H₂O mixture (98/2 wt%) at 60°C. The time course of pervaporation dehydration for the EA/H₂O mixture (95/5 wt%) confirms the stability of BTESE membrane in the investigated time period of 120 h. Further, the membrane exhibited excellent selectivity larger than 10,000 for separation of ternary mixtures (90/2/8 wt%) of ethyl acetate/ethanol/water and n-propyl acetate/isopropanol/water respectively, the composition of which is similar to the top product of the distillation column used in the industrial esterification process. The best separation performance and excellent acid stability of BTESE membranes in this study suggest that the simple synthesis protocol of undiluted sol coating and flash firing will provide a cost-effective, quick, and efficient synthesis route for practical membrane based applications.     

Ultrahigh molecular weight polyethylene with improved crosslink density,oxidation stability,and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements

Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints.