Calculation of optimum spacing for a three coil axially symmetric metal detector

When designing an in-line metal detector, a three coil axially symmetric design is often employed. For maximum sensitivity to small particles, the spacing of the coils is an important factor. A formula is derived which predicts the signal produced by a metal sphere when moved along the axis of such a detector and from this a graph is produced to determine the optimum coil spacing.<>     

Base alumina ceramics with dispersoids: mechanical behaviour and tissue response afterin vivo implantation

Base alumina ceramics with dispersoids (BAC) are a new class of ceramics with improved mechanical properties as compared to pure alumina. They are obtained by dispersion of powder within an alumina matrix. Of the three new ceramics studied here, A20Z possesses the best mechanical properties as well as tribological properties superior to those of pure alumina whether it is used in ceramic-ceramic or ceramic-polyethylene combination.Mechanical behaviour and tissue response afterin vivo implantation were studied. Small four-point flexion bars obtained by pressureless sintering were implanted subcutaneously in the rat. The mechanical properties were unmodified even after one year from implantation.The tissue response was studied up to one year on cylinders implanted in the paravertebral muscles of Wistar rats, and was evaluated by qualitative examination of the encapsulating membrane and measurement of its thickness in relation to pure alumina. The tissue responses were comparable for both alumina and the three tested ceramics.     

Experimental densities for compressed R134a

This paper reports densities of compressed R134a (1,1,1,2-tetrafluoroethane) determined by using a contiuously weighed pycnometer at 20 K intervals between 180 and 380 K at pressures from slightly greater than the vapour pressure to 70 MPa. The results are accurate to within ±0.1%. Saturated liquid densities derived by extrapolation from the experimental values agree with other reported values to within ±0.3%.     

Planar-flow spin-casting of molten metals: process behaviour

An experimental study of the planar-flow melt-spinning process was performed in order to gain a better understanding of the steady-state production of microcrystalline and amorphous ribbons. The dependence of the thickness of the ribbon product,T, on process parameters (wheel speed,U, nozzle/wheel gap,G, overpressure, ΔP, nozzle-slot breadth,R, and nozzle-slot width,W) was determined using an apparatus designed to deliver reproducible results. Thicknesses were reproducible to within 5%–8%. Guided by dimensional analysis, the non-dimensional thickness (T/G) was found to depend, within the experimental error, only on a non-dimensional pressure drop (ΔP/ρU ²) and slot breadth (R/G) for fixed thermal conditions. Data from the literature and our data, which considerably extend the range, correlate consistently on this basis. In contrast to the steady behaviour, the limits within which a uniform ribbon can be formed depend on a larger set of parameters; this dependence is sketched with the available data. Finally, a variety of observed ribbon surface textures (free meniscus side) is catalogued.     

Performance characteristics of a composite multivariate quality control system.

We present the results of an evaluation of the performance characteristics of a composite multivariate quality control (CMQC) system that incorporates quality control rules for univariate, multivariate, and correlation conditions. The CMQC system evaluated is designed to help analysts detect unacceptable trends and systematic error in one or more variables, unacceptable random error in one or more variables, and unacceptable changes in the correlation structure of any pair of variables. It is also designed to be tolerant of missing data, to allow analysts to reject as few as one or as many as all variables in a run, and to provide analysts with control statistics and graphics that logically relate to sources of analytical error. We show that the various components of the CMQC system have adequate statistical power to detect systematic errors, random errors, and correlation changes under the conditions likely to be encountered with multivariate analytical measurement systems: (1) a single variable with increased systematic or random error; (2) all variables or a subgroup of variables affected by a common problem that increases systematic or random error; and (3) missing data for one or more variables in a run. We also show that the power of the multivariate component of the CMQC system to detect systematic and random errors is higher than the power of an alternative multivariate test criterion.     

Wigner-space synthesis of discrete-time periodic signals

A procedure that facilitates at least-squares synthesis of periodic, discrete-time signals from Wigner quasi-distributions is proposed. The scheme is based on expanding the desired time sequence on a generally nonorthogonal, Gabor-type basis whose associated biorthogonal function presumably exists. The specific basis selection may crucially affect the efficiency and quality of the ensuing synthesis procedure. The cited basis type constitutes a considerable generalization over the standardly used orthogonal variety, thus creating previously unavailable degrees of freedom. Of primary significance is the acquired capability of generating time-frequency basis functions that are well localized. Localization is a highly desirable property that can advantageously serve in various applications. It is shown and numerically demonstrated that benefits of localization as well as the fact that achieving effective time-frequency basis localization renders a certain degree of oversampling unavoidable     

The use of probability theory in fracture mechanics—A case study

A probabilistic approach to fracture mechanics in the form of a typical case study is described wherein the integrity of a high-pressure water pipeline is assessed. An analysis methodology is discussed incorporating the probability density functions of defect sizes, the statistics of defect occurrences and the statistical distribution of material properties. This method enables the analyst to supply a very simple assessment of safety, based on the probability of failure (a single number) which may be compared to accepted industrial standards (e.g. 10⁻⁶ for nuclear applications). It is argued that this method often offers the only way to scientifically and economically assess the integrity of fracture prone structures.     

Relative permeability measurements for two phase flow in unconsolidated sands

This paper presents the results of laboratory measurements of relative permeability for two phase flow in partially saturated samples of unconsolidated sands. Relative permeabilities for tap water and air, de-aired water and nitrogen were measured using a steady—state technique. Three different sand samples (fine sand, heterogeneous sand and coarse sand) were tested.