Investigation of the relationships between the chain organization and rheological properties of atactic poly(vinyl alcohol) hydrogels

The structure and rheological behavior of atactic poly(vinyl alcohol) (a-PVA) hydrogels prepared by freeze/thaw cycles were investigated as a function of polymer concentration and number of freeze/thaw cycles. The presence of phases with different mobilities was observed using ¹³C CP/MAS and DP/MAS NMR experiments. The degree of crystallinity of the a-PVA-rich phase was determined by ¹H NMR free decay experiments. Measurements of the shear storage and loss modulus were performed at a fixed frequency of 1 Hz and a strain value of 0.1%, i.e. under conditions where the deformation imposed on the gel structure is entirely reversible. Results thus obtained showed that an increase in the number of freeze/thaw cycles induces an increase in the degree of crystallinity in the polymer-rich phase together with an increase in the storage modulus. The a-PVA hydrogels became more fragile as the number of freeze/thaw cycles was increased. Moreover, both the percentage of protons in a rigid environment measured by ¹H NMR and the storage modulus values tended to a limiting value after six freeze/thaw cycles. These results show that the first five or six freeze/thaw cycles play a very important role in determining the hydrogel structure and rheological properties. A more detailed comparison of NMR and rheological data led to the conclusion that the storage modulus is mainly controlled by the a-PVA crystallinity while the hydrogen bond interactions have a much smaller contribution.     

How do the newer oral antimicrobials stack up against traditional agents?

As the antibiotic arsenal expands with the development of new oral agents, selecting appropriate therapy is becoming more difficult. What are the therapeutic indications for the newer antimicrobials, and what advantages do they have over traditional agents? Drs Gleckman and De La Rosa discuss current issues related to antibiotic treatment and offer specific recommendations for the best use of the newer agents.     

A new eicosapentaenoic acid formed from arachidonic acid in the coralline red algaeBossiella orbigniana

Aqueous extracts of the coralline red algaeBossiella orbigniana have been shown to catalyze the enzymatic oxidation of arachidonic acid to a previously unreported ω6 eicosapentaenoic acid product. This unique fatty acid contains a conjugated tetraene with absorption maxima at 293, 306, and 321 nm, and was identified by spectral methods as 5(Z),8(Z),10(E),12(E),14(Z)-eicosapentaenoic acid. The compound was given the trivial name bosseopentaenoic acid. Under experimental conditions, production of bosseopentaenoic acid was linear up to 2 hr and dioxygen was consumed. Bosseopentaenoic acid, along with several other conjugated tetraenes, was also present in the algae endogenously as revealed by a comparison of the ultraviolet (UV) spectra and the high-performance liquid chromatographic (HPLC) pattern of the purified product and the organic extract ofBossiella.     

SCRATCH RESISTANT POLYIMIDE COATINGS FOR ALUMINOSILICATE GLASS SURFACES

Several polyimide resins were tested as possible scratch resistant coatings for aluminosilicate glass centrifuge tubes. Tubes with siloxane pretreatments provided the best adhesion between the polyimide and glass surface. Resins synthesized with an alkoxysilane group incorporated into the polyimide chain also showed improved adhesion, but the results were not as significant as when the pretreatment was used. Elastic recovery and effective Young's modulus of the polyimide coatings were calculated from nano-scratching. The results indicate that polyimides with a lower modulus, and higher elastic recovery, protected the glass surface best, exhibiting compression of the coating layer. An example was poly-4-4'-oxydiphenylene pyromellitimide (PMDA-ODA), whereas the coatings with a high effective Young's modulus and low elastic recovery ruptured. An example of a failed coating was poly-4,4'-carbonyldiphenylene 3,3',4,4'-biphenylenetetracarboximide (BPDA-DABP) which had low amount of elastic recovery, high effective Young's modulus and a large amount of flaking during macroscratch testing.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Kinetic modelling of textural changes in ready-to-eat breakfast cereals during soaking in semi-skimmed milk

Summary Ready‐to‐eat breakfast cereals immersed in milk undergo undesirable changes in texture because of sudden moisture uptake. The textural changes are ascribable to a plasticizing effect of water, which modifies the mechanical strength of products by softening the starch/protein matrix. In this work, some textural parameters of different cereal flakes were derived from the force–displacement curves monitored during 300 s of immersion in milk. Hardness loss, deformability increment and changes in the force–displacement curve profile were calculated and plotted against soaking time. The application of a sugar coating process to a model cereal flake increased the initial product hardness and improved the preservation of the textural parameters during immersion. The Peleg model closely fitted the experimental data, with regression coefficients from 0.967 to 0.999.