Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

浅谈降低岩土施工成本的几点意见

通过正确分析岩土施工成本的价格体现和存在问题 ,对实现成本效益做出科学评价 ,并提出降低岩土施工成本的途径     

Parallel Pattern-Based Systems for Computational Biology: A Case Study

Computational biology research is now faced with the burgeoning number of genome data. The rigorous postprocessing of this data requires an increased role for high-performance computing (HPC). Because the development of HPC applications for computational biology problems is much more complex than the corresponding sequential applications, existing traditional programming techniques have demonstrated their inadequacy. Many high level programming techniques, such as skeleton and pattern-based programming, have therefore been designed to provide users new ways to get HPC applications without much effort. However, most of them remain absent from the mainstream practice for computational biology. In this paper, we present a new parallel pattern-based system prototype for computational biology. The underlying programming techniques are based on generic programming, a programming technique suited for the generic representation of abstract concepts. This allows the system to be built in a generic way at application level and, thus, provides good extensibility and flexibility. We show how this system can be used to develop HPC applications for popular computational biology algorithms and lead to significant runtime savings on distributed memory architectures.     

我国核工业废放射源安全管理

废放射源易于在管理上失去控制，从而酿成事故，对人类和环境造成危害。本文分析了我国废放射源产生的原因，介绍了我国核工业废放射源的现状与安全管理的技术路线和策略，提出了当前所面临的主要问题。     

应用管网式水力喷射泵延长垦西油田油井免修期

水力喷射泵采油是 2 0世纪 90年代初研制成功的一种采油新工艺 ,1994年通过ISO90 0 1质量体系认证 ,主要适用于稠油井、出砂严重及偏磨、腐蚀严重的油井。 1998年 3月开始在垦西油田K71断块实施该工艺 ,目前有管网式水力喷射泵井 2 7口 ,与常规机械采油相比 ,垦西油田油井免修期由 110d延长到 35 0d左右。介绍了管网式水利喷射泵采油工艺及其在垦西油田的实施效果。     

一种确定高窄带滤光片峰值波长的方法

本文介绍一种主动式高窄带滤光片峰值波长的测量方法。该方法可以有效的测量出窄带滤光片的敏感波长，而不需要太复杂的设备。通过染料激光谐振腔的模式竞争，可以测量出滤光片的透射或反射波的波长。     

应用实时全息术和散斑照相术测量岩石的弹性参数

本文介绍用激光实时全息术测量岩石的泊松比μ,用散斑照相放大术测量岩石的杨氏模量E,进而由弹性理论中的关系式G=E/(2(1+μ))算出岩石的切变模量G。由此可以获得所测岩石的弹性参数。