Silica-shelled single quantum dot micelles as imaging probes with dual or multimodality

The present study describes a stabilization of single quantum dot (QD) micelles by a "hydrophobic" silica precursor and an extension of a silica layer to form a silica shell around the micelle using "amphiphilic" and "hydrophilic" silica precursors. The obtained product consists of approximately 92% single nanocrystals (CdSe, CdSe/ZnS, or CdSe/ZnSe/ZnS QDs) into the silica micelles, coated with a silica shell. The thickness of the silica shell varies, starting from 3-4 nm. Increasing the shell thickness increases the photoluminescence characteristics of QDs in an aqueous solution. The silica-shelled single CdSe/ZnS QD micelles possess a comparatively high quantum yield in an aqueous solution, a controlled small size, sharp photoluminescence spectra (fwhm approximately 30 nm), an absence of aggregation, and a high transparency. The surface of the nanoparticles is amino-functionalized and ready for conjugation. A comparatively good biocompatibility is demonstrated. The nanoparticles show ability for intracellular delivery and are noncytotoxic during long-term incubation with viable cells in the absence of light exposure, which makes them appropriate for cell tracing and drug delivery. The presence of the hydrophobic layer between the QD and silica-shell ensures an incorporation of other hydrophobic molecules with interesting properties (e.g., hydrophobic paramagnetic substances, hydrophobic photosensitizers, membrane stabilizers, lipid-soluble antioxidants or prooxidants, other hydrophobic organic dyes, etc.) in the close proximity of the nanocrystal. Thus, it is possible to combine the characteristics of hybrid materials with the priority of small size. The silica-shelled single QD micelles are considered as a basis for fabrication of novel hybrid nanomaterials for industrial and life science applications, for example, nanobioprobes with dual modality for simultaneous application in different imaging techniques (e.g., fluorescent imaging and functional magnetic resonance imaging).     

Enhancement of recombinant soluble dengue virus 2 envelope domain III protein production in Escherichia coli trxB and gor double mutant

The dengue virus is currently the most important flavivirus causing human diseases in the tropical and subtropical regions of the world. The envelope protein domain III of dengue virus type 2 (D2EIII), which induces protective and neutralizing antibodies, was expressed as an N-terminal fusion to a hexa-histidine tag in Escherichia coli. The expression of recombinant D2EIII of 103 amino acids in the soluble form can be achieved using suitable host strains, such as Origami, at a low induction temperature of 18 degrees C. The enhanced production of the soluble protein could be attributed to the thioredoxin reductase (trxB) and glutathione reductase (gor) double mutations in the Origami genome. The soluble and refolded D2EIII proteins were recognized by different antibodies including human patient antiserum. The immunization of rats with soluble D2EIII protein elicited the production of antibodies that could recognize the D2EIII protein in the D2EIII precursor protein and in C-terminal truncated dengue envelope protein type 1-4. Thus, this protein production system is suitable for the production of authentic recombinant dengue proteins that may be used in the diagnosis of the dengue virus infection or in vaccine development.     

Determination of epoxidized soybean oil in bottled foods

A determination method for epoxidized soybean oil (ESBO) in bottled foods was developed and used to survey bottled foods on the Japanese market. The amount of sample required was decreased to 20 g and the standard addition method was adopted for the quantification, because lipid in foods interrupted the hydrolysis of ESBO. The recoveries were 87.1 and 98.9% and the determination limit was 5.0 microg/g for a 20 g sample, be cause lipid in foods interupted the hydrolysis of ESBO. The recoveries using the internal standard method varied widely, because hydrolysis of the internal standard, cis-11,14-eicosadienoic acid ethyl ester, was affected more than that of ESBO by coexisting lipid in the sample. ESBO was not detected in any of the bottled baby food samples examined (14 samples), though it had been frequently detected in previous European surveys. This difference may be related to the low fat content and low fluidity of the bottled baby foods retailed in Japan. On the other hand, ESBO was detected at levels of 25.7-494.0 microg/g in liver paste, pasta sauce, Sungan in spicy oil, and spicy oil. These foods had higher fat content and higher fluidity. However, ESBO intake from these foods appears unlikely to exceed the TDI in the EU (1 mg/kg bw/day).     

Room-temperature miscibility gap in LixFePO4

The rechargeable lithium-ion cell is an advanced energy-storage system. However, high cost, safety hazards, and chemical instability prohibit its use in large-scale applications. An alternative cathode material, LiFePO(4), solves these problems, but has a kinetic problem involving strong electron/hole localization. One reason for this is believed to be the limited carrier density in the fixed monovalent Fe(3+)PO(4)/LiFe(2+)PO(4) two-phase electrode reaction in LixFePO4. Here, we provide experimental evidence that LixFePO4, at room temperature, can be described as a mixture of the Fe(3+)/Fe(2+) mixed-valent intermediate LialphaFePO4 and Li1-betaFePO4 phases. Using powder neutron diffraction, the site occupancy numbers for lithium in each phase were refined to be alpha=0.05 and 1-beta=0.89. The corresponding solid solution ranges outside the miscibility gap (0相似文献   

Characterization of Li<Subscript>2</Subscript>S–P<Subscript>2</Subscript>S<Subscript>5</Subscript>–Cu composite electrode for all-solid-state lithium secondary batteries

Electrochemical performance of the Li₂S–P₂S₅–Cu composite materials was examined in all-solid-state lithium secondary batteries. The 80Li₂S·20P₂S₅ (mol.%) solid electrolyte with the addition of Cu was partially used as an active material with lithium source in all-solid-state cells. The initial discharge capacity of 110 mAh g⁻¹ (normalized by the weight of 80Li₂S·20P₂S₅–Cu), which corresponds to 400 mAh g⁻¹ (normalized by the weight of Li₂S), was obtained in the cell using the 80Li₂S·20P₂S₅–Cu composite electrode with the molar ratio of Li₂S/Cu = 48/52. Cycling performance and reaction mechanism of the electrode in the solid-state cell were investigated.     

Effect of Si on the oxidation reaction of α-Ti(0 0 0 1) surface: ab initio molecular dynamics study

Abstract

We present our ab initio molecular dynamics (MD) study of the effect of Si on the oxidation of α-Ti(0?0?0?1) surfaces. We varied the Si concentration in the first layer of the surface from 0 to 25 at.% and the oxygen coverage (θ) on the surface was varied up to 1 monolayer (ML). The MD was performed at 300, 600 and 973 K. For θ = 0.5 ML, oxygen penetration into the slab was not observed after 16 ps of MD at 973 K while for θ > 0.5 ML, oxygen penetration into the Ti slab was observed even at 300 K. From Bader charge analysis, we confirmed the formation of the oxide layer on the surface of the Ti slab. At higher temperatures, the Si atoms diffused from the first layer to the interior of the slab, while the Ti atoms moved from second layer to the first layer. The pair correlation function shows the formation of a disordered Ti-O network during the initial stage of oxidation. Si was found to have a strong influence on the penetration of oxygen in the Ti slab at high temperatures.     

Computed tomography reconstruction from two transmission measurements for iodine-marked cancer detection

The authors invented the transXend detector, which measures X-rays as electric currents, and then gives the energy distribution of the X-rays after an unfolding process. In a previous paper, it was shown that the material thickness distributions can be estimated with the transXend detector by using reference points plotted from the electric current ratios, such as the I ₂/I ₁ ? I ₃/I ₁ graph, where I_i denotes the electric current measured by the i-th segment of the transXend detector. In this paper, the tomographic images of iodine, aluminum, and the acrylic those surround the other two materials are reconstructed from their material thickness distributions, which are estimated from two X-ray incidence directions. The X-ray event ratios are also used to estimate the material thickness distributions.