Mechanical properties of glassy carbon fibres derived from phenolic resin

Mechanical properties of glassy carbon fibres produced from a phenolic resin were determined by static tensile testing. These specimens are of special interest because they consist of an isotropic core surrounded by a sheath of oriented material of varying relative thickness. The chemistry of pyrolysis of the resin is summarized and the changes in mechanical properties of the fibres are discussed in terms of the pyrolysis mechanisms. The results are compared with hardness measurements made on discs produced from the same starting material. Scanning electron microscope studies revealed that the fibres have various types of flaws both in the surface and in the core. The effect of these flaws on the fibre strength is discussed by applying Griffith crack theory.     

Detection of characteristic signals from as-doped (<1 at.%) regions of silicon by transmission electron microscopy and convergent-beam electron diffraction

Characteristic signals were detected from As-doped (< 1 at.%) regions of silicon by dark-field transmission electron microscopy and convergent-beam electron diffraction. A slight intensity increase was observed in 220 dark-field images, which may be explained by an increase of scattering amplitude due to the As doping. The doped region showed a much higher intensity in 004 dark-field images. The characteristic high intensity was observed for specimens with As concentrations of about 0.09-0.8 at.%. Convergent-beam electron diffraction patterns obtained from the As-doped region showed a characteristic rocking curve for 004 reflection. These characteristics should originate from incoherent elastically scattered electrons due to a static lattice distortion around the doped As atoms. The observed characteristics in dark-field images and rocking curves of the 004 reflection should be a good probe not only for investigating the concentration of doped atoms in Si lattice, but also for the amount of impurity and/or point defects in other crystalline materials.     

A stiffness adjustment mechanism maximally utilizing elastic energy of a linear spring for a robot joint

This paper proposes a mechanism that adjusts mechanical stiffness around a robot joint and utilizes whole elastic energy of an elastic element. The proposed mechanism consists of a lead screw mechanism, a linear spring, and wires. The lead screw mechanism moves a nut of the lead screw mechanism to change a bending point of the wire, which connects the linear spring and the lead screw mechanism. Then, moment arm and ratio of joint rotation to extension of the spring are varied. As a result, joint stiffness is adjusted. Because this mechanism does not apply tension to the spring for the stiffness adjustment, whole elastic energy of the spring can be utilized for joint rotation. This utilization can minimize weight and size of the elastic element. Additional advantages of the proposed mechanism are mechanical simplicity, wide range of adjustable stiffness, and no energy consumption for keeping constant stiffness. We analyze characteristics of the proposed mechanism and compare with other mechanisms in detail. Device development and experimental results are provided for demonstrating the effectiveness of the proposed mechanism.     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

Fabrication of TiO2 composite materials for air purification by magnetic field effect and electrocodeposition

Novel air purification materials were fabricated by the application of a magnetic field. In a magnetic field perpendicular to a copper plate, nickel particles with a diameter of 10 m were arranged to form numerous pillar-like structures on the matrix surface, and copper as a binder was deposited onto the three-dimensional surface. The total surface area of the pillars and the matrix increased with the magnetic flux density, up to about 800 cm² per cm² of the original matrix surface at 6.2 T. After successful codeposition of TiO₂ particles on the fabricated materials by electroplating, their photocatalytic activities were evaluated on the basis of the removal efficiency of nitrogen oxides (NO _x ), which are some of the most hazardous air pollutants. It was concluded that the samples with the pillar-like structures had two opposite characteristics: large surface area as a positive effect and shadowing against ultraviolet (UV) irradiation as a negative effect. However, total photocatalytic activity increased to twice as much as that of the flat sample by improving the UV irradiation method and the preparation condition of the materials     

Level-of-Detail Rendering of Large-Scale Irregular Volume Datasets Using Particles

This paper describes a level-of-detail rendering technique for large-scale irregular volume datasets. It is well known that the memory bandwidth consumed by visibility sorting becomes the limiting factor when carrying out volume rendering of such datasets. To develop a sorting-free volume rendering technique, we previously proposed a particle-based technique that generates opaque and emissive particles using a density function constant within an irregular volume cell and projects the particles onto an image plane with sub-pixels. When the density function changes significantly in an irregular volume cell, the cell boundary may become prominent, which can cause blocky noise. When the number of the sub-pixels increases, the required frame buffer tends to be large. To solve this problem, this work proposes a new particle-based volume rendering which generates particles using metropolis sampling and renders the particles using the ensemble average. To confirm the effectiveness of this method, we applied our proposed technique to several irregular volume datasets, with the result that the ensemble average outperforms the sub-pixel average in computational complexity and memory usage. In addition, the ensemble average technique allowed us to implement a level of detail in the interactive rendering of a 71-million-cell hexahedral volume dataset and a 26-million-cell quadratic tetrahedral volume dataset.     

Neonatal granulocytosis is a postpartum event which is seen in the liver as well as in the blood

In a recent series of studies, we demonstrated that stress in humans and animals, with resultant sympathetic nerve strain, induces severe granulocytosis, because granulocytes carry adrenergic receptors on the surface. Because activated granulocytes produce free radicals and superoxides, they sometimes induce tissue damage if the stress is too strong or continuous. Human neonates are also known to show high levels of granulocytes in the peripheral blood. In this study, we investigated whether such neonatal granulocytosis are a stress-associated response at birth. Both human and mouse materials, before and after birth, were used. The number of leukocytes in the blood, as well as some other factors in the serum, were measured. Although levels of granulocytes were found to be low in fetal humans and mice, they increased sharply after birth. In parallel with this postpartal granulocytosis, transaminases in sera increased transiently. In reference to results of a transient elevation in the levels of catecholamines at birth in mice, all these phenomena resemble stress-associated responses. Indeed, fatty liver and hematopoietic destruction in the liver were also observed in mice and humans. At this time, the production of inducible nitric oxide synthase (iNOS) by granulocytes in the liver was evident. These results suggest that neonatal granulocytosis is a postpartum event which results from various stresses (e.g., oxygen stress) at birth. This event may be responsible for such well-known neonatal phenomena as the termination of fetal hematopoiesis in the liver and as neonatal jaundice.