Neonatal granulocytosis is a postpartum event which is seen in the liver as well as in the blood

In a recent series of studies, we demonstrated that stress in humans and animals, with resultant sympathetic nerve strain, induces severe granulocytosis, because granulocytes carry adrenergic receptors on the surface. Because activated granulocytes produce free radicals and superoxides, they sometimes induce tissue damage if the stress is too strong or continuous. Human neonates are also known to show high levels of granulocytes in the peripheral blood. In this study, we investigated whether such neonatal granulocytosis are a stress-associated response at birth. Both human and mouse materials, before and after birth, were used. The number of leukocytes in the blood, as well as some other factors in the serum, were measured. Although levels of granulocytes were found to be low in fetal humans and mice, they increased sharply after birth. In parallel with this postpartal granulocytosis, transaminases in sera increased transiently. In reference to results of a transient elevation in the levels of catecholamines at birth in mice, all these phenomena resemble stress-associated responses. Indeed, fatty liver and hematopoietic destruction in the liver were also observed in mice and humans. At this time, the production of inducible nitric oxide synthase (iNOS) by granulocytes in the liver was evident. These results suggest that neonatal granulocytosis is a postpartum event which results from various stresses (e.g., oxygen stress) at birth. This event may be responsible for such well-known neonatal phenomena as the termination of fetal hematopoiesis in the liver and as neonatal jaundice.     

Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors

We report on our prototype experiment that uses a 4-m detuned resonant sideband extraction interferometer with suspended mirrors, which has almost the same configuration as the next-generation, gravitational-wave detectors. We have developed a new control scheme and have succeeded in the operation of such an interferometer with suspended mirrors for the first time ever as far as we know. We believe that this is the first such instrument that can see the radiation pressure signal enhancement, which can improve the sensitivity of next-generation gravitational-wave detectors.     

Development of a novel image intensifier of an amplifiedmetal-oxide semiconductor imager overlaid with electron-bombardedamorphous silicon

We developed a novel image intensifier (II) of an amplified metal-oxide-semiconductor (MOS) imager (AMI) overlaid with electron-bombarded (EB) amorphous silicon (a-Si). The electron bombardment gain (EB gain) was 1500 at an accelerating voltage of 10 kV. Since the multiplication process was free from a phosphorescent screen and a coupling fiber plate as in the conventional II, the resolution was high and the picture quality was good and free from granularity noises, white spots, lag and sticking. As for fatigue of X-ray irradiation, the contrasts of a vertical stripe (Smear) are not detectable and damaged areas in AMI are weak whereas both of those in charge-coupled devices (CCDs) are strong     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

Azimuthal wave number control of oscillatory thermocapillary convection in a liquid bridge

Thermocapillary convection in a half‐zone liquid bridge of high Prandtl number fluid is widely known to exhibit a three‐dimensional oscillatory flow after the onset of oscillation. The oscillatory flow presents ‘standing’ and ‘traveling’ flows depending upon the temperature difference between the top and bottom rods. In the oscillatory state, the flow shows a modal structure with an azimuthal wave number that depends on the aspect ratio of the liquid bridge and the intensity of the thermocapillarity expressed by the Marangoni number. The present study attempted to control the azimuthal wave number by heating the free surface locally with a prescribed frequency and intensity. The flow in the liquid bridge exhibited different modal structures depending on the heating conditions and a relationship between the frequency and the modal structure was obtained. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 460–469, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20086     

Level-of-Detail Rendering of Large-Scale Irregular Volume Datasets Using Particles

This paper describes a level-of-detail rendering technique for large-scale irregular volume datasets. It is well known that the memory bandwidth consumed by visibility sorting becomes the limiting factor when carrying out volume rendering of such datasets. To develop a sorting-free volume rendering technique, we previously proposed a particle-based technique that generates opaque and emissive particles using a density function constant within an irregular volume cell and projects the particles onto an image plane with sub-pixels. When the density function changes significantly in an irregular volume cell, the cell boundary may become prominent, which can cause blocky noise. When the number of the sub-pixels increases, the required frame buffer tends to be large. To solve this problem, this work proposes a new particle-based volume rendering which generates particles using metropolis sampling and renders the particles using the ensemble average. To confirm the effectiveness of this method, we applied our proposed technique to several irregular volume datasets, with the result that the ensemble average outperforms the sub-pixel average in computational complexity and memory usage. In addition, the ensemble average technique allowed us to implement a level of detail in the interactive rendering of a 71-million-cell hexahedral volume dataset and a 26-million-cell quadratic tetrahedral volume dataset.     

Fabrication of TiO2 composite materials for air purification by magnetic field effect and electrocodeposition

Novel air purification materials were fabricated by the application of a magnetic field. In a magnetic field perpendicular to a copper plate, nickel particles with a diameter of 10 m were arranged to form numerous pillar-like structures on the matrix surface, and copper as a binder was deposited onto the three-dimensional surface. The total surface area of the pillars and the matrix increased with the magnetic flux density, up to about 800 cm² per cm² of the original matrix surface at 6.2 T. After successful codeposition of TiO₂ particles on the fabricated materials by electroplating, their photocatalytic activities were evaluated on the basis of the removal efficiency of nitrogen oxides (NO _x ), which are some of the most hazardous air pollutants. It was concluded that the samples with the pillar-like structures had two opposite characteristics: large surface area as a positive effect and shadowing against ultraviolet (UV) irradiation as a negative effect. However, total photocatalytic activity increased to twice as much as that of the flat sample by improving the UV irradiation method and the preparation condition of the materials     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass

Mechanical deformation of Pd₄₀Ni₄₀P₂₀ was characterized in compression over a wide strain rate range (3.3×10⁻⁵ to 2×10³ s⁻¹) at room temperature. The compression sample fractured with a shear plane inclined 42 degree with respect to the loading axis, in contrast to 56 degree for the case of tension. This suggests the yielding of the material deviates from the classical von Mises yield criterion, but follows the Mohr-Coulomb yield criterion. Fracture stress as well as strain was found to decrease with increasing applied strain rate. The compressive stress (1.74 GPa) was also found to be higher than the tensile fracture stress at a quasi-static strain rate. Close examination of the stress–strain curves revealed that localized shear might have occurred at a compressive stress of about 1.4 GPa, much lower than the “apparent” yield stress of 1.74 GPa. However, the stress of 1.4 GPa for shear band initiation is almost the same as the fracture stress measured at a dynamic strain rate of 5×10² s⁻¹. These results suggested that the fracture of a bulk metallic glass is sensitive to the applied loading rate.