A comparative study of the durability and behaviour of fat lime and feebly-hydraulic lime mortars

Lime mortars are often used for repairs to historic buildings. This paper investigates two forms of lime binder: fat and feebly-hydraulic, in order to predict their long-term behaviours and hence ascertain which of the two possesses greater durability, so that they may be used more efficiently in restoration. Mortars were tested for properties governing moisture movement and also subject to durability cycles. The resistance to damage under freezing conditions was evaluated with the saturation coefficient. Thermal cycles had no effect on the mortars and gave no indication of the relative durabilities of the binders. Salt crystallization cycles, though effective in distinguishing the more durable of the two, were too aggressive to gauge a clear profile of salt weathering and succeeded in rapidly decomposing the samples. Tests on the properties governing moisture movement produced good indications of the degree to which the mortars permit flow through their fabrics. According to the results obtained, fat lime mortars are more durable than those made with feebly-hydraulic lime. The results also suggest that the feebly-hydraulic lime mortars are at a higher risk of decomposition by granular disintegration whereas fat lime mortars are better suited to damp, slightly exposed conditions. These results disagree with the general opinion that hydraulic limes are more durable than fat limes due to the additional strength and water insolubility arising from their hydraulicity.     

Laser stimulated low-temperature crystallization of amorphous silicon

Laser annealing of amorphous silicon (a-Si) at different initial temperatures (77 and 300 K) has been studied. It is established that the laser-stimulated crystallization of silicon is possible at relatively low temperatures. A theoretical model is proposed, which explains this phenomenon by melting via the electron mechanism followed by recrystallization.     

Heat losses in a tunnel kiln for brick firing

The results of experimental studies of heat losses via the enclosing structures of an operating brick-firing kiln using a thermal imager are described. __________ Translated from Steklo i Keramika, No. 4, pp. 24–25, April, 2006.     

Efficient particle filter-based processing algorithm for clutter suppression and IR point targets enhancement

A novel soft decision-based median subtraction filter is presented for clutter suppression and infrared (IR) point targets enhancement. The decision is made based on a jump Markov model and its state and parameter estimation using a particle filter. The scheme is compared with other conventional clutter background removal techniques and good results are obtained.     

New Ideas on the Mechanism of Structure Formation in Nitrided Steels

The main laws of formation of structure and properties of nitrided structural steels are studied depending on their composition, parameters of preliminary heat treatment, and nitriding modes. New factors controlling the structure and operational properties based on new concepts of the mechanism of formation of nitride particles in the nitriding process are determined.     

Interface formation between two organic films based on phthalocyanine and perylene derivatives

The process of interface formation between two organic films composed of donor (copper phthalocyanine, CuPc) and acceptor (perylene-3,4,9,10-tetracarboxylic dianhydride, PTCDA) molecules has been studied in situ using the total current spectroscopy technique. It is established that the donor-acceptor interaction between CuPc and PTCDA molecules do not distort the energy structure of the density of electron states. The main π*, σ*₁, and σ*₂ bands of antibonding (unoccupied) electron states are identified, which are determined both by C-C bonds in the aromatic rings and by additional C-N and C-O bonds. The width of the interface potential barrier is evaluated and its relation to the limiting polarizability of molecules is demonstrated. The interface potential barrier is formed in the course of negative charge transfer between donor (CuPc) and acceptor (PTCDA) molecules.     

Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink

The stability of five major phenolics, namely (−)-epicatechin (EC), procyanidin B₂ (PC-B₂), chlorogenic acid (ChA), hyperoside (HP) and isoquercitrin (IQ), in hawthorn fruits and a canned hawthorn drink were evaluated during 6 months of storage in the dark at three different temperatures (4, 23 and 40 °C). HPLC with a diode-array detector was used to determine the contents of the individual compounds. The results showed that the studied phenolics in the hawthorn fruits and the drink were both stable at 4 °C and relatively unstable at 23 and 40 °C with varied extents of degradation. At room temperature (23 °C), marked degradations of EC and PC-B₂ were observed in both the fruits and the drink with around 50% and 30% decrease after a 6-month storage, respectively. A more significant decrease of the phenolics was observed at 40 °C, especially for EC and PC-B₂, which were almost completely degraded after a 6-month storage. HP, IQ and ChA were relatively stable at 23 °C, but unstable at 40 °C. Therefore, low-temperature storage is recommended for maintaining the quality and efficacy of hawthorn fruits and its preparations.     

Quantification and genotyping of Cryptosporidium spp. in river water by quenching probe PCR and denaturing gradient gel electrophoresis.

A new detection method was developed for the simultaneous quantification and genotyping of Cryptosporidium spp. in river water. Several modifications made to the US EPA Method 1623 enabled high and stable recovery of Cryptosporidium from 40 L of river water (geometric mean = 35%, standard deviation = 8.7%). Quenching probe PCR (QProbe PCR) was used to quantify the 18S rRNA gene of Cryptosporidium spp. This method could successfully detect single oocysts in a sample, and the lower quantitation limit was as low as 2.5 oocysts/sample. In addition, denaturing gradient gel electrophoresis (DGGE) followed by DNA sequencing was used to identify the genotypes. These methods were applied to detect Cryptosporidium spp. in the Koyama River, Japan. The positive ratio was 69% (11/16) with the maximum concentration of 59 oocysts/100 L. Seven genotypes including two novel ones were identified. These results showed that this detection method could provide valuable information on Cryptosporidium in river water, both in the concentration and in the genotypes, which is essential for the precise assessment of waterborne risk to human health.     

Cover Picture: Light‐Emitting Organic Solar Cells Based on a 3D Conjugated System with Internal Charge Transfer (Adv. Mater. 22/2006)

The cover image illustrates the dual photovoltaic and electroluminescence function of a single‐layer device based on a thienylenevinylene–triphenylamine with internal charge transfer (ICT), as reported by Cravino, Roncali, and co‐workers on p. 3033. The material forms an organic glass with isotropic electronic properties while ICT leads simultaneously to an extension of the photoresponse to the red and to an increase of the open circuit voltage. The use of an additional layer of C₆₀ further improves the photovoltaic. Images of the sun and moon courtesy NASA/JPL–Caltech.