The properties of a spinel copper cobaltite prepared at low temperatures and normal pressure

The properties of a spinel copper cobaltite obtained by thermal decomposition of mixed nitrates of both metals at 350°C and normal pressure are described. It has been shown that the maximum copper content (x) in the spinel Cu_xCo_3?xO₄ does not exceed 0.9. When the copper amount in the initial mixture is higher a second phase CuO is formed. The copper ions are distributed over the A- and the B-sites of the spinel lattice, i.e. the spinel is partially inverted. Such a model explains well the data obtained about the lattice parameter, IR-absorption and the magnetic susceptibility of the samples with different x.     

Use of166mHo for calibration of gamma-ray spectrometers with semiconductor detectors

Translated from Atomnaya Énergiya, Vol. 67, No. 3, pp. 215–216, September, 1989.     

On the reliability of computer predictions of the geomechanical behaviour of rock-salt

Geomechanical aspects of the storage of radioactive waste in salt formations have been studied extensively using finite element methods over the last 20 years. In consequence a range of computer programs and associated modelling techniques have been assembled. The paper is based on a benchmark exercise to compare the predictive abilities of a number of these programs and highlights the difficulties of making reliable a-priori estimates of long term behaviour.     

Removal of nitrates from groundwater through the use of artificial wetlands

Intensive fertilizer use has led to nitrate contamination of groundwater in many areas. This article examines the possibility of removing nitrates through the construction of artificial wetlands. A pilot study conducted in Denmark has found that the method is effective and economical, at least for small waterworks, though further treatment is necessary before an acceptable microbiological water quality is attained.     

Wear in check valves due to flow induced motion

Experiments showing the frequency and amplitude of the flow induced motion of the gate for a 2- and a 4-in. swing check valve have been performed. The gate motion is due to turbulence in approach flow. We have found the dominant turbulent frequency of the approach flow is about half the natural frequency of the valves. The valves appear to be almost critically damped. Because of this, the valves respond almost as they would to a static force of the magnitude characteristic of the turbulent fluctuation in the flow. Both the dimensionless exciting force and the damping ratio have been found to be independent of valve size so the above statements are true for larger valves also. The recommended valve oscillation amplitudes and frequencies are used to calculate the wear at the shaft and at the stop. For an unpegged check valve, such as one of the 10-in. valves which was used at the San Onofre Nuclear Generation Station, it was found that shaft bearing wear would amount to 0.27 in.³/year and stop wear to 0.03 in.³/year.     

Influence of Lipid Composition on the Water and Fat Exudation and Gel Strength of Meat Batters

Blends of lard with eight separate fats or oils (70:30 w/w) were prepared and used as the fat component of meat batters. After cooking, the batters were analyzed for water and fat exudation and gel strength. None differed significantly from the control of 100% lard. Positive correlation coefficients, however, were significant between percent monounsaturated triglycerides and water exudation, polyunsaturated triglycerides and fat exudation and saturated triglycerides and gel strength. Addition of lecithin, cholesterol or methyl palmitate to the lard increased fat exudation and decreased gel strength. Sodium laurate had the opposite effect whether added to the lard or to the aqueous phase.     

NADRA 3D information technology for analysis of processes in multicomponent soil media

This paper considers the principles of algorithmic and software implementation of the software system NADRA 3D designed to analyze processes in three-dimensional multicomponent soil media. The principles of operation of NADRA 3D are described. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 6, pp. 157–174, November–December 2006.