外压作用下套管抗挤强度研究

为提高套管挤毁压力的计算精度,应用统计方法对213根套管全尺寸挤毁试验数据进行了方差分析。结果表明,径厚比、屈服强度是套管抗挤强度的主要影响因素,不圆度、壁厚不均度、残余应力等因素对套管抗挤强度的影响呈随机性分布。利用有限元方法对外径不圆度、壁厚不均度和残余应力的不同组合进行模拟分析得出,数值相同的外径不圆度、壁厚不均度及平均残余应力组合不同时,套管的挤毁压力相差很大。提出了新的套管挤毁压力计算公式,计算表明精度可满足工程要求。     

Reliability Analysis on the δ-Shock Model of Complex Systems

We investigate the delta-shock model of complex systems consisting of n i.i.d. components. We first obtain a general lifetime distribution for the delta-shock model of a general complex system by reducing the system to a linear combination of parallel systems. We then consider coherent system structures including series, parallel, and k-out-of-n, then derive some useful results including reliability bounds, bounds on the mean lifetime, limiting distributions, and Laplace-Stieltes transforms     

Performance of a combined eco-system of ponds and constructed wetlands for wastewater reclamation and reuse.

An on-site study on the operational performance of a combined eco-system of ponds and SF constructed wetland for municipal wastewater treatment and reclamation/reuse in Donging City, Shandong, China was carried out from January 2001 through October 2003. The removal efficiencies for various main parameters were: TSS 84.8 +/- 7.3%, BOD5 87.2 +/- 5.3%, CODCr 70.2 +/- 18.6%, TP 52.3 +/- 23.1%, and NH(3)-N 54.8 +/- 23.9% with effluent concentration of TSS 9.12 +/- 5.12 mg/l, BOD5 6.44 +/- 4.58 mg/l, CODCr, 42.8 +/- 6.7 mg/l, TP 0.94 +/- 0.27 mg/l and NH(3)-N 7.95 +/- 2.36 mg/l. In addition, the removal efficiencies for faecal coliforms and total bacteria were > 99.97% and > 99.998% respectively, which well meet Chinese National standards for effluent quality of municipal wastewater treatment plants. The composition of TSS was closely related to CODCr and BOD5 variations, and nitrification-denitrification is the major mechanism of nitrogen removal both in ponds and in wetlands. In addition, sedimentation also played an important role in the removal of TSS, nitrogen, phosphorus and BOD5. The removal efficiencies of various parameters, the number of species and biomass of biological community in the system increased gradually with the ecological maturation.     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

Application of Direct Ignition Technology with Minimum Gasified Oil in Lignite-Fired Boiler

The firing is in the stable condition and the rate of oil saving comes up to 64%, after Fularji Power Plant adopted the technology of minimum gasified oil igniting pulverized lignite directly and the technology of multistage coal combustion with energy amplified stage by stage.     

PDC钻头对录井的影响及应对措施

钻井技术水平的不断提高和PDC钻头的广泛使用给现场录井作业带来了新问题。与传统的三牙轮钻头相比,PDC钻头突出的特点是产生的岩屑稀少、细小甚至失真,给地质录井的岩屑采集、鉴定、识别以及油气层级别的判定、解释、评价带来了一系列困难。为此,结合PDC钻头在新疆塔河、松辽盆地、鄂尔多斯等地油田的使用及录井经验,从PDC钻头条件下岩屑特征和岩性特征的分析入手,阐述使用PDC钻头对气测录井、荧光录井的影响,总结了在PDC钻头条件下搞好录井作业的应对措施,并列举了提高录井技术水平的可行途径。     

高压注水管柱受力分析

进行高压注水管柱受力分析的目的就是根据注水条件研究注水管柱在不同过程中的各类效应，以及这些效应对管柱产生的受力和变形规律，从而明确注水管柱的工作状态，保障注水管柱有效合理地工作。较详细地分析了高压注水管柱在锚定、坐封以及注水3个过程中的受力状态和变形情况，并分析了高压注水管柱在不同过程中受到的各种效应的影响，推导出注水管柱在不同过程中的应力及变形的计算公式，并给出了算例。     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

如何又好又快地完成水利统计任务

1.依法进行统计是统计工作的根本 《中华人民共和国统计法》的颁布实施为统计工作提供了有力的法律保证,它明确了部门统计的合法性、必要性,明确了其责任、权力和义务。统计工作必须在统计法允许的范围内开展。设置统计机构,配备统计人员,确定统计任务,制定统计报表制度,进行各项统计调查,确定具体的统计指标等,都必须遵循这一原则。[第一段]     

跳频对GSM网络容量的贡献

本首先提出了射频跳频技术是提高网络容量的关键技术。在此基础上，以跳频为着眼点，分析并量化计算了跳频对干扰的改善度，同时根据跳频对容量的影响，给出现有技术条件下GSM网容量的极限。