Uptake of Pb(II) and Cd(II) by a new phenolformaldehyde polymer resin derived by the insertion of sulfur ligands in the form of xanthate

A new phenolformaldehyde polymer resin containing potential soft‐type donor atoms (sulfur atoms) was synthesized by the reaction of sodium salt of 2,4‐dihydroxyacetophenone formaldehyde resin with carbon disulfide. The resin was characterized by elemental analysis, IR, and ¹H‐NMR spectral studies. Because of its insolubility in aqueous media, the resin was successfully used in the removal of Pb(II) and Cd(II). Parameters such as the effect of pH, the effect of time, competitive studies, the effect of initial metal‐ion concentration, and the recyclability of the polymer resin were studied. The amount of metal removed by the resin was determined with atomic absorption spectrophotometry. The retention properties were strongly dependent on pH. The elution of metal ions was investigated in acid media. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1932–1936, 2004     

In-line recording and off-axis viewing technique for holographic particle velocimetry

Prior approaches (e.g., off-axis holography) to overcoming the limitations of in-line holography for particle fields, namely, intrinsic speckle noise and depth resolution, involved an increased complexity of the optical system. The in-line recording and off-axis viewing (IROV) technique employs a single laser beam to record an in-line hologram, which is then viewed off axis during reconstruction. The signal-to-noise ratio and depth resolution of IROV are higher than conventional in-line holography by an order of magnitude and are comparable with off-axis holography. IROV is a much simpler approach than off-axis holography and is highly promising for holographic particle velocimetry. Measurements of the three dimensional flow velocity field of a vortex ring obtained by an IROV-based holographic particle velocimetry system are presented.     

Robust Multimodal Biometric System Based on Feature Level Fusion of Optimiseddeepnet Features

Wireless Personal Communications - Multimodal biometric systems combine feature knowledge from multiple traits to overcome shortcomings of unimodal systems. However, most of the traditional...     

Attack Resilient and Efficient Protocol based on Greedy Perimeter Coordinator Routing—Mobility Awareness for Preventing the Attack in the VANET

Wireless Personal Communications - A Greedy Perimeter Coordinator Routing and Mobility Awareness (GPCR-MA) vehicular routing is a widely accepted routing protocol for VANET (Vehicular Ad hoc...     

A novel application of micro-EDM process for the generation of nickel nanoparticles with different shapes

This article explains production of nickel nanoparticles through a micro-electrical discharge machining (EDM) process with a combination of different process parameters. The production of nickel nanoparticles was carried out in a dielectric medium (deionized water) with developed micro-EDM while polyvinyl alcohol worked as the stabilizing agent. The characterization of nickel nanoparticle was done by scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), UV–Vis spectroscopy, and Fourier transform infrared (FTIR) analysis. From this investigation, the mean crystal size of the nickel nanoparticles was found to be in the range of 15–20?mm for a pulse-on time variation of 2–0.3?µs and the crystal size was found to decrease with the decrease of pulse-on time. It was also observed that with this decrease, the shape and size of nickel nanoparticles change from spherical to needle-like. The dispersion stability of nickel nanofluid was determined by viscosity measurements and the dynamic viscosity was noted to decrease by decreasing the pulse duration. From the FTIR spectrum results, it was confirmed that the synthesized nickel nanoparticles in deionized water were pure and monolithic. UV–Vis–NIR spectroscopy depicted that the band gap energy increases with a reduction in the pulse-on time and obtains a higher band gap (5.31?eV) for 0.3?µs pulse-on time.     

Biosynthesis and characterisation of nano‐silica as potential system for carrying streptomycin at nano‐scale drug delivery

A growing trend within nanomedicine has been the fabrication of self‐delivering supramolecular nanomedicines containing a high and fixed drug content ensuring eco‐friendly conditions. This study reports on green synthesis of silica nanoparticles (Si‐NPs) using Azadirachta indica leaves extract as an effective chelating agent. X‐ray diffraction analysis and Fourier transform‐infra‐red spectroscopic examination were studied. Scanning electron microscopy analysis revealed that the average size of particles formed via plant extract as reducing agent without any surfactant is in the range of 100–170 nm while addition of cetyltrimethyl ammonium bromide were more uniform with 200 nm in size. Streptomycin as model drug was successfully loaded to green synthesised Si‐NPs, sustain release of the drug from this conjugate unit were examined. Prolong release pattern of the adsorbed drug ensure that Si‐NPs have great potential in nano‐drug delivery keeping the environment preferably biocompatible, future cytotoxic studies in this connection is helpful in achieving safe mode for nano‐drug delivery.Inspec keywords: silicon compounds, nanofabrication, nanomedicine, drug delivery systems, nanoparticles, X‐ray diffraction, Fourier transform infrared spectra, scanning electron microscopyOther keywords: nanosilica, streptomycin, nanoscale drug delivery, nanomedicine, silica nanoparticles, Azadirachta indica leaves extract, X‐ray diffraction analysis, Fourier transform‐infrared spectroscopy, scanning electron microscopy, cetyltrimethyl ammonium bromide, SiO₂      

Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

Warm-Mix Asphalt (WMA) is a widely used product, which proved a contribution to the reduction in asphalt mixing and compaction temperatures. This reduction leads to lower fuel consumption and smoke emission in asphalt plants. Most of the characterisation of binders used in WMA has focused in the past on measuring linear viscoelastic properties and associated Superpave parameters. Several studies have shown that the average stresses and strains of the asphalt mixture remain mostly within the linear viscoelastic response. However, localised strains in the binder phase of the mixture could reach values high enough to induce nonlinear viscoelastic and viscoplastic deformations. Therefore, this study focuses on an experimental and analytical evaluation of linear, nonlinear viscoelastic and viscoplastic responses of selected binders modified for use in WMA. The first part of the paper analyses the linear viscoelastic material properties and their ability to evaluate permanent deformation resistance. Then, the non-recoverable creep compliance parameter obtained from the Multiple Stress Creep Recovery (MSCR) test is analysed to assess the nonlinear response and permanent deformation of asphalt binders. The paper utilises a nonlinear plasto-viscoelastic (NPVE) approach to assess and quantify the nonlinear plasto-viscoelastic response of binders by separating the recoverable and irrecoverable strains measured in the MSCR test. Two WMA additives were included in this study by mixing them with polymer-modified and unmodified asphalt binders. Analysis of results showed that the NPVE approach captured a higher percentage of recovery than the NLVE approach. However, binder’s performance evaluation and ranking did not change by adopting the NPVE approach. The nonlinear viscoelastic parameters provided insight on the behaviour of asphalt binders mixed with WMA additives during loading cycles. Sasobit showed higher influence than Advera on binders in resisting permanent deformation by increasing the recoverable strain during the unloading phase.     

Neural network based controller for Cr–Fe batch reduction process

An automated pilot plant has been designed and commissioned to carry out online/real-time data acquisition and control for the Cr⁶⁺–Fe²⁺ reduction process. Simulated data from the Cr⁶⁺–Fe²⁺ model derived are validated with online data and laboratory analysis using ICP-AES analysis method. The distinctive trend or patterns exhibited in the ORP profiles for the non-equilibrium model derived have been utilized to train neural network-based controllers for the process. The implementation of this process control is to ensure sufficient Fe²⁺ solution is dosed into the wastewater sample in order to reduce all Cr⁶⁺–Cr³⁺. The neural network controller has been utilized to compare the capability of set-point tracking with a PID controller in this process. For this process neural network-based controller dosed in less Fe²⁺ solution compared to the PID controller which hence reduces wastage of chemicals. Industrial Cr⁶⁺ wastewater samples obtained from an electro-plating factory has also been tested on the pilot plant using the neural network-based controller to determine its effectiveness to control the reduction process for a real plant. The results indicate the proposed controller is capable of fully reducing the Cr⁶⁺–Cr³⁺ in the batch treatment process with minimal dosage of Fe²⁺.     

Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.