Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Effect of the SiC particle size on the dry sliding wear behavior of SiC and SiC–Gr-reinforced Al6061 composites

The effect of size of silicon carbide particles on the dry sliding wear properties of composites with three different sized SiC particles (19, 93, and 146 μm) has been studied. Wear behavior of Al6061/10 vol% SiC and Al6061/10 vol% SiC/5 vol% graphite composites processed by in situ powder metallurgy technique has been investigated using a pin-on-disk wear tester. The debris and wear surfaces of samples were identified using SEM. It was found that the porosity content and hardness of Al/10SiC composites decreased by 5 vol% graphite addition. The increased SiC particle size reduced the porosity, hardness, volume loss, and coefficient of friction of both types of composites. Moreover, the hybrid composites exhibited lower coefficient of friction and wear rates. The wear mechanism changed from mostly adhesive and micro-cutting in the Al/10SiC composite containing fine SiC particles to the prominently abrasive and delamination wear by increasing of SiC particle size. While the main wear mechanism for the unreinforced alloy was adhesive wear, all the hybrid composites were worn mainly by abrasion and delamination mechanisms.     

Underlying solvent-based factors that influence permanent porosity in porous liquids

Porous liquids(PLs)offer the potential to combine the ready handling and mature industry status of liquid absorbents,with the high permanent porosity of metal o...     

Review: the latest advances in biomedical applications of chitosan hydrogel as a powerful natural structure with eye-catching biological properties

Journal of Materials Science - Chitosan is one of the natural cationic polymers with unique properties such as non-toxicity, biodegradability, biocompatibility, environmentally friendly that has...     

Trapping of Free Electrons in Multipole System

In this paper, the effective Parameters in the confinement and trapping of fast electrons in plasma source Such as; plasma pressure, wall material of plasma chamber and magnetic mirror rate have been investigated with using Comsol & Geant4 code. The calculations are shown that the Multicusp magnetic field was effective the pressure less than 5?mTor, and the confinement effect becomes stronger with decreasing pressure. It is equivalent to a higher yield of output ions of plasma source. The number of fast electrons trapped in the magnetic field increases with increasing magnetic field intensity and using aluminum for wall material. Optimum conditions of confinement plasma, leading to increased the hot electron density, and ionization efficiency is increased. The results of investigations have demonstrated good correspondence with theoretical calculations, therefore there is the adequacy of the developed approach and the possibility to build more effective source ion on this basis.     

Design of CMOS three-stage amplifiers for fast-settling switched-capacitor circuits

In this paper, a time-domain design procedure for fast-settling three-stage amplifiers is presented. In the proposed design approach, the amplifier is designed to settle within a specific time with a given settling accuracy and circuit noise budget by optimizing both the power consumption and silicon die area. Both linear and nonlinear settling regions of three-stage amplifiers are considered and optimal values of the amplifier stages transconductance and compensation capacitors are obtained using the genetic algorithm optimization. Detailed design equations are provided and circuit level simulation results using a 90 nm CMOS technology are presented to evaluate the usefulness of the proposed design scheme respected to the previously reported design approaches.     

Predictive simulation-based lighting and shading systems control in buildings

This paper presents a prototypically implemented daylight-responsive lighting and shading systems control in buildings that makes use of real-time sensing and lighting simulation. This system can control the position of window blinds and the status of the luminaires. It operates as follows: (1) at regular time intervals, the system considers a set of candidate control states for the subsequent time step; (2) these alternatives are then virtually enacted via a lighting simulation application that receives input data from a self-updating model of sky (luminance distribution maps obtained via calibrated digital photography), room, and occupancy; (3) the simulation results are compared and ranked according to the preferences (objective function) specified by the occupants and/or facility manager to identify the candidate control state with the most desirable performance.     

Colour removal from a simulated dye wastewater using a two-phase anaerobic packed bed reactor

In recent years, rapid technological advances in the textile and dyeing industry have yielded benefits to society but have also generated new and significant environmental problems. The treatment alternatives applicable for the removal of colour vary, depending upon the type of dye wastewater. A synthetic, simulated mixed dye waste (Basic Yellow 28, Basic Yellow 21, Basic Red 18.1, Basic Violet Red 16, Basic Red 46, Basic Blue 16, Basic Blue 41) representing a known waste from a fibre production factory, was investigated. The biological process of anaerobic digestion has been recognised as a simple and energy-efficient means of treating and stabilising a wide range of organic industrial wastewaters. This study sets out to demonstrate the effect of different loading rates, dye concentrations and hydraulic retention times (HRTs) on colour removal efficiency under mesophilic anaerobic conditions. The reactor was operated under mesophilic conditions at different organic loading rates (OLRs) and HRTs for nine months. The results of this study show that a 2-stage mesophilic anaerobic up-flow packed bed reactor can remove up to 90% of the colour from a mixed cationic dye containing 1000 mg/l of dye. Colour removal efficiency falls as the influent dye concentration increases, but rises with increased hydraulic retention time and increased organic loading. The primary colour removal mechanism was one of biosorption with subsequent biodegradation. Acetoclastic methanogens were moderately inhibited at low organic loading rates of 0.25 kg COD/m3 d, at which level, acidogenesis and acetogenesis appeared to be unaffected. Inhibition of acidogenesis became marked at higher OLRs (1 kg COD/m3 d) and when the HRT was reduced from 5 to 3 days.     

Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium

Diffusion joining of commercially pure titanium was successfully prepared via transient liquid phase bonding in vacuum environment. The process was carried out using AMS 4772 silver-based filler alloy at 900–1000°C for various holding time under the vacuum of 6?×?10^?7?Torr. Optical and scanning electron microscopy equipped with an EDS analyzer was conducted for microstructural evaluations. Mechanical properties were also investigated by shear test, fractographic assessment and X-ray diffraction analyses. The tendency to achieve isothermally solidified joint increased by increasing bonding time. No sign of athermal solidification was detected of sample bonded at 1000°C for 90?min. Consequently, the bonding condition of a high quality joint was obtained. Elemental analyses revealed that filler alloy’s elements (Ag, Cu) distributed more uniformly in fully isothermal solidified bond, whereas the aggregation of these elements is considerable in athermally solidified bond. Shear test results represented that the highest shear strength attributed to the sample bonded in isothermal solidified condition (bonded at 1000°C for 90?min).     

Surface functionalized cadmium telluride quantum dots for the optical detection and determination of herbicides

An optical sensor for detection of herbicides was developed through the functionalization of CdTe quantum dots (CdTe-QDs) with cysteamine hydrochloride. The functionalized CdTe-QDs was characterized with various physicochemical methods such as X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray analysis, Ultraviolet–visible and photoluminescence spectroscopies. The optical band gap of the functionalized CdTe-QDs as calculated by using Tauc plot was 3.75 eV. It was found that the fluorescence intensity of the functionalized CdTe-QDs quenched linearly in the presence of different herbicides according to the Stern–Volmer equation. Thus, the functionalized CdTe-QDs can be used as simple, rapid, inexpensive, and optical sensitive sensor for practical detection of herbicides.