Numerical analysis of the crack growth path in the cement mantle of the reconstructed acetabulum

In this study, we use the finite element method to analyze the propagation's path of the crack in the orthopedic cement of the total hip replacement. In fact, a small python statement was incorporated with the Abaqus software to do in loop the following operations: extracting the crack propagation direction from the previous study using the maximal circumferential stresses criterion, drawing the new path, meshing and calculating again (stresses and fracture parameters). The loop is broken when the user's desired crack length is reached (number of propagations) or the value of the mode I stress intensity factor is negative. Results show that the crack propagation's path can be influenced by human body posture. The existing of a cavity in the vicinity of the crack can change its propagation path or can absolutely attract it enough to meet it. Crack can propagate in the outward direction (toward the acetabulum bone) and cannot propagate in the opposite direction, the mode I stress intensity factor increases with the crack length and that of mode II vanishes.     

Sequencing a hybrid two-stage flowshop with dedicated machines

We treat the n -job, two-stage hybrid flowshop problem with one machine in the first stage and two different machines in parallel in the second stage. The objective is to minimize the makespan. We demonstrate that the problem is NP-complete. We formulate a dynamic program, which is beyond our grasp for problems of more than 15 jobs. Our search for heuristic approaches led to the adoption of the Johnson sequence, which motivated two of the three approaches: dynamic programming and sequence-and-merge. The third approach, the greedy heuristic, was included as example of an elementary heuristic.     

Identifying cylinder liner wear using precise coordinate measurements

This paper aims at exploiting the accurate precise measurements of CMM machine in exploring and investigating the wear happening between contacting solid surfaces. For instance, excessive wear, if detected by the CMM measurements, in a cylinder bore of an internal combustion engine can dramatically affect its performance quality, sealing function, scheme of lubrication, and eventually its service life span. In such case, the finger print would be the original design GD&T tolerances. Widely spread availability of CMM machines at a reasonable cost may make the applicability of this novel technique of wear detection feasible. In this work, precise and accurate measurements of deviations in roundness, straightness, and concentricity in a cylinder bore of an air cooled Automotive Diesel Engine dismantled for an overhaul using a CMM machine have been executed and analyzed to validate this technique. Thus, the results have been presented, discussed, analyzed and interpreted in order to evaluate the status of the engine during operation. Locations of remarkable deviations representing aggressive wear happenings in the cylinder bore are detected and investigated. The measurements, within the limits of uncertainty attributes, could reflect the performance quality of the engine, the suitability of the applied scheduled maintenance plan, and may also point at possible adverse operating conditions contributed to this wear. In the light of the findings, recommendations may thus be drawn and offered to the engine designer to improve his design. For instance, surface treatments and coatings could be preferably changed, or an innovative constructional modification may be suggested to homogenize the wear occurrence in the cylinder bore during operation. This may extend the operating life span of the cylinder and in turn reduces the maintenance expenses. This novel technique for the wear development recalling proved to be successful and reliable tool to diagnose the root causes of the wear aggression occurrence.     

Structural characteristics and electrical properties of copper doped manganese ferrite

A series of Mn_1?xCu_xFe₂O₄ ferrite samples with 0.2 ≤ x ≤ 0.5 were prepared using the co-precipitation method. X-ray analysis confirmed the formation of single phase cubic spinel structure for all concentrations. Rietveld refinement revealed that the Mn_1?xCu_xFe₂O₄ with all concentrations of x belongs to normal spinel structure. The lattice parameters decrease leading to the increase in the X-ray density with increasing the copper concentration and this may be due to the difference in the ionic radii between Mn²⁺ and Cu²⁺. The decrease in the crystallite size with increasing the copper content is attributed to the higher formation temperature. The IR absorption spectra analyses were used for the detection and confirmation of the chemical bonds in spinel ferrites. The AC electrical conductivity, real part of the dielectric constant and the loss tangent tan δ were studied as a function of the applied frequency and temperature. It was found that the AC electrical conductivity increased with increasing temperature, this increase may be related to the increase in the drift mobility of the charge carriers, which are localized at ions or vacant sites. The AC conductivity increases with increasing copper concentration which may be ascribed to the decrease in hopping length. The dielectric constant ?′ and dielectric loss showed a decrease with increasing frequency and increase with increasing temperature for all compositions. The dielectric behavior is explained by using the mechanism of polarization process.     

LTE‐Based Passive Bistatic Radar System for Detection of Ground‐Moving Targets

Use of a passive bistatic radar (PBR) system in the surveillance or monitoring of an area has its advantages. For example, a PBR system is able to utilize any available signal of opportunity (for example, broadcasting, communication, or radio navigation signals) for the purposes of surveillance. With this in mind, there are potentially many research areas to be explored; in particular, the capability of signals from existing and future communication systems, such as 4G and 5G. Long‐Term Evolution (LTE) is the world's most current communication system. Given this fact, this paper presents the latest feasibility studies and experimental results from using LTE signals in PBR applications. Details are provided about aspects such as signal characteristics, experimental configurations, and SNR studies. Six experimental scenarios are carried out to investigate the detection performance of our proposed system on ground‐moving targets. The ability to detect is demonstrated through use of the cross‐ambiguity function. The detection results suggest that LTE signals are suitable as a source signal for PBR.     

Synthesis, Surface, Thermodynamic Properties of Some Biodegradable Vanillin-Modified Polyoxyethylene Surfactants

Four water-soluble non-ionic ethoxylated surfactants based on vanillin were synthesized (VE₁₅, VE₂₀, VE₄₀, and VE₆₀). The chemical structures of these surfactants were confirmed using FT-IR and ¹H-NMR spectra. The molecular weights of the compounds were determined using viscosity measurements and gel permeation chromatography. Surface tension as a function of the concentration of the surfactant in aqueous solution was measured at 25, 40 and 55?°C. From these measurements, the critical micelle concentration (CMC), effectiveness (??_cmc), efficiency (pC₂₀), maximum surface (??_max) excess and minimum surface area (A _min), were calculated. The surface activity measurements showed their high tendency towards adsorption and micellization and their good surface tension reduction, and low interfacial tension. The emulsion stability measurements showed the applicability of these surfactants as emulsifying agents. The thermodynamic parameters of micellization (??G _mic, ??H _mic, ??S _mic) and adsorption (??G _ads, ??G _ads, ?S _ads) showed their tendency towards adsorption at the interfaces and also micellization in the bulk of their solutions. The biodegradability of the prepared surfactants was tested in river water using die-away method and showed their readily biodegradation in the open environment.     

Robust facial landmarking for registration

Finding landmark positions on facial images is an important step in face registration and normalization, for both 2D and 3D face recognition. In this paper, we inspect shortcomings of existing approaches in the literature and compare several methods for performing automatic landmarking on near-frontal faces in different scales. Two novel methods have been employed to analyze facial features in coarse and fine scales successively. The first method uses a mixture of factor analyzers to learn Gabor filter outputs on a coarse scale. The second method is a template matching of block-based Discrete Cosine Transform (DCT) features. In addition, a structural analysis subsystem is proposed that can determine false matches, and correct their positions.     

Improving snort performance under linux

Network intrusion detection systems (NIDS) have become vital components in securing today?s computer networks. To be highly effective, NIDS must perform packet inspection of incoming traffic at or near wire speed. Failing to do so will allow malicious packets to sneak through the network undetected, and thus jeopardising network security. Snort is one of the most popular IDS and intrusion prevention system (IPS) applications. Snort is a publicly available open-source NIDS application that typically runs on Linux. In this study, the authors present and discuss the essential software components of Snort and its underlying Linux support architecture. The authors characterise Snort execution and present an analytical queuing model to give insight into understanding the kernel and Snort behaviour as well as to identify key-dominating factors that strongly influence and impact Snort performance. The authors demonstrate that the current default configurations of the packet reception mechanism of the Linux networking subsystem (a.k.a. NAPI) are not suitable for Snort performance and show that the performance of Snort can be improved significantly by tuning certain configuration parameters, specifically by having a small NAPI budge value of 2. The performance is measured in terms of throughput and packet loss. The authors also measure the packet loss encountered at the kernel level as well as the interrupt rate of incoming traffic. Performance was measured when subjecting a PC host running Snort to both normal and malicious traffic, and with different traffic load conditions.     

Low-temperature processing and characterization of single-phase PZT powders by sol-gel method

A new sol-gel system using acetoin was developed and employed for the fabrication of PZT powders and films with compositions near the morphotropic phase boundary Pb(Zr_0.52Ti_0.48)O₃. Acetoin was used as chelating agent to replace the highly toxic methoxyethanol used in previous formulations. This route simplified the chemical processing of PZT-based solutions. Powders were completely crystallized by about 450 °C and contained the ferroelectric perovskite single phase. The firing temperature and time were to be the most important variables. Metallic lead formed only when excess Pb was incorporated. The precursor and the heat-treated powders have been characterized by using thermal analysis and X-ray diffractometry (XRD) studies. The average particle size, as measured from X-ray line broadening, was ∼35 nm.     

MedHySol: Future federator project of massive production of solar hydrogen

Mediterranean Hydrogen Solar (MedHySol) is a federator project for development of a massive hydrogen production starting from solar energy and its exportation within a framework of a Euro–Maghrebian Cooperation project for industrial and energetic needs in the Mediterranean basin. The proposal of this project is included in the Algiers Declaration's on Hydrogen from Renewable Origin following the organization of the first international workshop on hydrogen which was held in 2005. Algeria is the privileged site to receive the MedHySol platform. The objective of the first step of the project is to realize a technological platform allowing the evaluation of emergent technologies of hydrogen production from solar energy with a significant size (10–100 kW) and to maintain the development of energetic rupture technologies. The second step of the project is to implement the most effective and less expensive technologies to pilot great projects (1–1000 MW). In this article we present the potentialities and the feasibility of MedHySol, as well as the fundamental elements for a scientific and technical supervision of this great project.