Synthesis and Evaluation of Some Triazole Derivatives as Corrosion Inhibitors and Biocides

Three compounds namely; 5-(phenyl)-4H-1,2,4-triazole-3-thiol, 3-(decylthio)-5-phenyl-1H-1,2,4-triazole and 3-(benzylthio)-5-phenyl-1H-1,2,4-triazole) were synthesized. The chemical structure of the prepared compounds was confirmed using FTIR and ¹H-NMR analysis. The compounds were tested as corrosion inhibitors against the corrosion of carbon steel in 1 M HCl using weight loss, polarization and electrochemical impedance methods. The results revealed that these compounds have significant inhibiting effects on the corrosion of carbon steel. Polarization studies showed that the compounds act as mixed-type inhibitors which retard the anodic and the cathodic reactions with a predominant effect towards the cathodic reaction. The prepared compounds were evaluated as antimicrobial agents against sulfate-reducing bacteria using the serial dilution method, which showed good biocidal action.     

Biocalalyst effects of immobilized anthraquinone on the anaerobic reduction of azo dyes by the salt-tolerant bacteria

The accelerating effect of dissolved redox mediators has been studied in details in the bio-decolorization processes, but there are little literatures about the non-dissolved redox mediators. Here we describe the accelerating effect of anthraquinone as a redox mediator in the bio-decolorization. Decolorization of azo dyes was carried out experimentally using the salt-tolerant bacteria under immobilized anthraquinone and high salt conditions. Anthraquinone as a redox mediator was able to increase the decolorization rate of azo dyes, and was immobilized by entrapment in calcium alginate (CA), Polyvinyl alcohol (PVA)-H(3)BO(3) and agar, respectively. The effects of various operating conditions such as anthraquinone bead number, dissolved oxygen, temperature and pH on microbial decolorization were investigated experimentally. The reusability of the anthraquinone immobilization beads was evaluated with repeated-batch decolorization experiments. After four repeated experiments, the decolorization rate of CA immobilized anthraquinone retained over 90% of their original value. The experiments explored a great improvement of the redox mediator application and the new bio-treatment concept.     

Extraction of naphthalene. Optimization and application to an industrial rejected fuel oil

The extraction efficiency of naphthalene from an organic phase depends essentially on the choice of extractant. It can be enhanced through the optimization of operating parameters. The organic phase studied was a fuel oil rejected at the process end of the coke gas treatment in an industrial plant of Annaba (Algeria). The mixture of methanol–phenol has been selected as extractant for its best efficiency. The amount of naphthalene in the oil phase was analyzed by refractometry and verified by infrared spectroscopy. The temperature, the density of methanol–phenol mixture and the quantity of extractant, were considered as the main parameters which affect the performance of extraction. Response surface methodology was applied to investigate the yield of extraction. A Box-Behnken design was used to produce models for objective responses based on parameters that have significant probabilities. It was developed by using these three main parameters at three levels. Analysis of variance showed that temperature and the volume ratio are the most affecting parameters on extraction yield. The developed regression equations described interdependencies between the input parameters and yield of extraction as responses. The results that were treated statistically were very interesting and allowed to deduce the optimum conditions for the best extraction efficiency which was in order to 80.38%. The application of extraction in these conditions has permitted to regenerate the fuel oil rejected by the industrial unit for other uses. The phenol–methanol mixture containing naphthalene can also be regenerated (91.8% of methanol and 94.2% of phenol) and more than 1 ton of pure naphthalene per day can be recovered. This could be very important for the industrial unit on decreasing the cost of the fuel consumption and more profits by producing pure naphthalene.     

Exposure to radiation from the natural radioactivity in Jordanian building materials

The natural radioactivity due to the presence of (226)Ra, (232)Th and (40)K in selected building materials used in Jordanian building constructions has been measured using gamma-ray spectrometer with a Hyper Pure germanium detector. The average activity concentrations observed in different building materials ranged from 27.7 +/- 7.5 to 70.4 +/- 2.8, 5.9 +/- 0.67 to 32.9 +/- 3.9 and 30.8 +/- 0.87 to 58.5 +/- 1.5 for (226)Ra, (232)Th and (40)K, respectively. The activity concentrations of (226)Ra measured in fine aggregates was found to be among the highest values obtained in this work. The ranges of the calculated Ra-equivalent were found to be lower than those values recommended for construction materials (370 Bq kg(-1)). The average internal and external hazard indices were found to be <1. The average of the calculated annual gonadal equivalent dose was found to be 198 microSv y(-1). Results indicate no significant radiological hazards arise from using such materials in building construction.     

Fast relief from migraine attacks using fast-disintegrating sublingual zolmitriptan tablets

Zolmitriptan is a potent molecule for treatment of migraine. Its current oral therapies present drawbacks such as slow onset of action, low bioavailability and large inter-subject variability. Fast disintegrating sublingual zolmitriptan tablet (FDST) using freeze-drying technique has been developed to enhance tablet disintegration and dissolution with the intention of speeding drug absorption and onset of effect, hence mitigating the effects on the gastrointestinal dysmotility that typically accompanies the migraine attack. The FDSTs were prepared using different concentrations of gelatin as binder and mannitol or L-alanine as matrix supporting/disintegration enhancing agents. The effect of formulation variables on the physicochemical and solid-state properties, as well as the dissolution behaviour of the tablets, was studied. The formulated FDSTs disintegrated within 30 s and showed significantly faster dissolution rate of zolmitriptan compared to the zolmitriptan oral tablet. Tablet containing 2% gelatin and mannitol showed acceptable weight variation, drug content and friability values. Furthermore, it had a low in-vitro and in-vivo disintegration time (11 s) and it reached 100% of drug release within 30 s. This sublingual formulation gave faster and higher zolmitriptan plasma concentration in rabbits compared to the oral zolmetriptan market product. Zolmitriptan FDST may therefore constitute an advance in the management of acute migraine attacks.     

Energy and exergy analyses of an integrated SOFC and coal gasification system

This paper examines an integrated gasification and solid oxide fuel cell (SOFC) system with a gas turbine and steam cycle that uses heat recovery of the gas turbine exhaust. Energy and exergy analyses are performed with two different types of coal. For the two different cases, the energy efficiency of the overall system is 38.1% and 36.7%, while the exergy efficiency is 27% and 23.2%, respectively. The effects of changing the reference temperature on the exergy destruction and exergy efficiency of different components are also reported. A parametric study on the effects of changing the pressure ratio on the component performance is presented.     

Dicyanamido–metal(II) complexes. Part 3: Hydrolysis of the dicyanamide into amidocyanamide during its interaction with Cu(II) perchlorate and 2-pyridylcarbonyl-N,N-bis(2-pyridylmethyl)amine

The reaction of Cu(ClO₄)₂, 2-pyridylcarbonyl-N,N-bis(2-pyridylmethyl)amine (DPA-CO-py) and sodium dicyanamide (Nadca) in aqueous medium led to the isolation of three complexes: {[Cu(DPA)(μ_1,5-dca)]ClO₄}_n (1), [Cu₂(pic)₂(μ_1,3-H₂NCO–N–CN)₂(H₂O)₂] · 2H₂O (2) and Cu(pic)₂ · H₂O (3). The Cu²⁺ ion, during its complex formation with DPA-CO-py and dca not only assisted the hydrolysis of DPA-CO-py to the corresponding di(2-methylpyridyl)amine (DPA) and picolinic acid (Hpic) but also resulted in partial hydrolysis of one of the two nitrile groups of the dicyanamide, NC–N–CN^? (dca) to amidocynamide, H₂NCO–NH–CN. The complexes were structurally characterized and the single X-ray structures for 1 and 2 reveal their identity. Complex 1 forms a 1D polymeric chain with the dca acting as a μ_1,5-bridging ligand via the terminal nitrile nitrogen atoms. A distorted SP geometry around the Cu²⁺ centers was achieved by the three N-atoms of the DPA and by the two nitrile groups of the bridging dca ligands. Complex 2 consists of a dimeric unit with CuN₃O₂ chromophore in coordination polyhedron that has a distorted SP geometry. The amidocyanamide ion, H₂NCO–N–CN^? acts as bis(monodentate) μ_1,3-bridging ligand via the central amido and terminal nitrile nitrogen atoms whereas the picolinate anion forms a six-membered chelate ring through its pyridyl nitrogen and an oxygen atom of the carboxylate group, and the aqua water occupies the apical position of the structure. Complex 1 exhibits very weak antiferromagnetic coupling (J = ?0.31 cm^?1) whereas 2 shows a significant antiferromagnetic interaction between the two copper centers (J = ?13.6 cm^?1).     

Ultrasound-assisted capillary microreactor for aqueous–organic multiphase reactions

A simple capillary microreactor was tested as a potential reactor to carry out a multiphase reaction. The hydrolysis of benzyl chloride in a biphasic system was investigated. The capillary microreactor was irradiated by 28 kHz ultrasound at different temperatures, capillary lengths and phase flow rates. It was found that the combination of microreactor technique and the ultrasound irradiation provides a promising protocol for process intensification. Under sonication conditions, higher conversions were obtained compared to silent conditions. The presence of ultrasound has affected the multiphase slug size and promoted better internal circulation within these slugs. Similar reactivities were noticed at higher temperature for both sonication and silent conditions.