Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.     

Thermo-hydrodynamic aspect analysis of flows in solar chimney power plants—A case study

The purpose of the work presented in this study is related to heat transfer and airflow modelling analysis in solar chimneys, according to some dominant parameters. A typical case of application is given in this study. It consists in analyzing a natural laminar convective heat transfer problem taking place in a chimney. Heat transfer and fluid dynamic aspects of the airflow, through an axis symmetric system in a dimensionless form, with well defined boundary conditions is thus examined. Results are related to the temperature distribution and the velocity field in the chimney and in the collector, determined by solving the energy equation, and the Navier–Stokes equations, using finite volume method. The numerical code based on this modelling is validated through the Vahl Davis benchmark solution for natural convection and to other authors for other cases.     

Using next generation nuclear power reactors for development of a techno‐economic model for hydrogen production

Nuclear and hydrogen are considered to be the most promising alternatives energy sources in terms of meeting future demand and providing a CO?‐free environment, and interest in the development of more cost‐effective hydrogen production plants is increasing—and nuclear‐powered hydrogen generation plants may be a viable alternative. This paper is a report on investigating the application of new generation nuclear power plants to hydrogen production and development of an associated techno‐economic model. In this paper, theoretical and computational assessments of generations II, III+, and IV nuclear power plants for hydrogen generation scenarios have been reported. Technical analyses were conducted on each reactor type—in terms of the design standard, fuel specification, overnight capital cost, and hydrogen generation. In addition, a theoretical model was developed for calculating various hydrogen generation parameters, and it was then extended to include an economic assessment of nuclear power plant‐based hydrogen generation. The Hydrogen Economic Evaluation Program originally developed by the International Atomic Energy Agency was used for calculating various parameters, including hydrogen production and storage costs, as well as equity, operation and maintenance (O&M), and capital costs. The results from each nuclear reactor type were compared against reactor parameters, and the ideal candidate reactor was identified. The simulation results also verified theoretically proven results. The main objective of the research was to conduct a prequalification assessment for a cogeneration plant, by developing a model that could be used for technical and economic analysis of nuclear hydrogen plant options. It was assessed that high‐temperature gas‐cooled reactors (HTGR‐PM and PBR200) represented the most economical and viable plant options for hydrogen production. This research has helped identify the way forward for the development of a commercially viable, nuclear power‐driven, hydrogen generation plant.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Photocatalytic degradation of methyl orange dye by NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles under visible irradiation: effect of varying the synthesis temperature

Nanoparticles of nickel ferrites (NiFe₂O₄) were synthesized at different temperature of synthesis (25, 50 and 80 °C) through the chemical co-precipitation method. The synthesized powders were characterized using X-ray diffraction for crystallite size and lattice parameter calculation. It reveals the presence of cubic spinel structure of ferrites with crystallite size between 29 and 41 nm. Transmission electron microscopy and scanning electron microscopy showed uniform distribution of ferrite particles with some agglomeration. The Fourier-transform infrared spectroscopy showed absorption bonds, which were assigned to the vibration of tetrahedral and octahedral complexes. Raman spectroscopy is used to verify that we have synthesized ferrite spinels and determines their phonon modes. The thermal decomposition of the NiFe₂O₄ was investigated by TGA/DTA. The optical study UV–visible is used to calculate the band gap energy. Magnetic measurements of the samples were carried out by means of vibrating sample magnetometer and these studies reveal that the formed nickel ferrite exhibits ferromagnetic behavior. Photoluminescence showed three bands of luminescence located at 420, 440 and 535 nm. The photocatalytic properties of nickel ferrite (NiFe₂O₄) nanoparticles were evaluated by studying the photodecomposition of methyl orange as organic pollutant models and showed a good photocatalytic activity.     

Microscopic details of asphaltenes aggregation onset during waterflooding

We report detailed microscopic studies of asphaltenes aggregation onset during waterflooding of petroleum reservoirs. To achieve this objective, a series of simulations are performed on asphaltenic-oil miscibilized with water at high pressure and temperature through molecular dynamics. Results of this simulation onset are applicable to asphaltenes behavior in real crude oils. Our simulation results illustrate that the aggregation onset in waterflooding generally follows three sequential steps: (i) Asphaltene-water interaction; (ii) Water bridging; (iii) Face-to-face stacking. Then, asphaltene-water and water-water hydrogen-bonding network surround every aggregate boosting the intensity of aggregation onset. We intend to utilize such understanding of these details in our predictive and preventive measures of arterial blockage in oil reservoirs during waterflooding.     

An enhanced symbiosis organisms search algorithm: an empirical study

Many nature-inspired optimization algorithms have recently been proposed to solve difficult optimization problems where the mathematical gradient-based approaches could not be used. However, those approaches were often not tested on a proper set of problems. Moreover, statistical tests are sometimes not used to validate the conclusions. Therefore, empirical analyses of such approaches are needed. In this paper, a very recent nature-inspired approach, symbiosis organisms search (SOS), is investigated. A set of unbiased and characteristically different problems are used to study the performance of SOS. In addition, a comparison with some recent optimization methods is conducted. Then, the effect of SOS only parameter, eco_size, is studied, and the use of different random distributions is also explored. Finally, three simple SOS variants are proposed and compared to the original SOS. Conclusions are validated using nonparametric statistical tests.

     

Arghel Extract: a Promising Green Corrosion Inhibitor

Protection of Metals and Physical Chemistry of Surfaces - The corrosion of copper in an aqueous 0.5 M H2SO4 has been studied under the effect of Arghel plant extracts using potentiodynamic...     

Silver nanoparticle films by flowing gas atmospheric pulsed laser deposition and application to surface-enhanced Raman spectroscopy

For the fast uptake into industrial applications, the further development of robust methods of nanomaterials, which are inexpensive and simultaneously technologically feasible, is one of the major key factors. A newly introduced atmospheric pulsed laser deposition method, based on a flowing gas approach, was used for plasmonic metal nanoparticle (NP) film of silver. Contrary to vacuum, in this method, the ambient air restricts expansion of the ablation plume within 1 to 3 mm above the target surface. These sets constrain on the formation of NP film close to the ablation spot. For deposition on a widely spaced surface, ablation material was entrained in a flow of argon, supplied at ~32 ms⁻¹, and effectively delivered to the substrate at ~20 ms⁻¹. The films produced were crystalline and particulate in nature, showing spectral plasmonic feature of surface plasmon resonance in the visible region. The film was directly tested in surface-enhanced Raman spectroscopy for chemical detection of crystal violet; the film with large particulates and aggregated crystallites was well-performed, showing enhanced Raman signals and detection sensitivity. Certainly, flowing gas atmospheric pulsed laser deposition seems a fast alternative to vacuum-pulsed laser deposition but needs further investigations to bring it in the industry for applications in sensor, catalysis, solar cell, and coating technology.