Increasing Angiogenesis Factors in Hypoxic Diabetic Wound Conditions by siRNA Delivery: Additive Effect of LbL-Gold Nanocarriers and Desloratadine-Induced Lysosomal Escape

Impaired wound healing in people with diabetes has multifactorial causes, with insufficient neovascularization being one of the most important. Hypoxia-inducible factor-1 (HIF-1) plays a central role in the hypoxia-induced response by activating angiogenesis factors. As its activity is under precise regulatory control of prolyl-hydroxylase domain 2 (PHD-2), downregulation of PHD-2 by small interfering RNA (siRNA) could stabilize HIF-1α and, therefore, upregulate the expression of pro-angiogenic factors as well. Intracellular delivery of siRNA can be achieved with nanocarriers that must fulfill several requirements, including high stability, low toxicity, and high transfection efficiency. Here, we designed and compared the performance of layer-by-layer self-assembled siRNA-loaded gold nanoparticles with two different outer layers—Chitosan (AuNP@CS) and Poly L-arginine (AuNP@PLA). Although both formulations have exactly the same core, we find that a PLA outer layer improves the endosomal escape of siRNA, and therefore, transfection efficiency, after endocytic uptake in NIH-3T3 cells. Furthermore, we found that endosomal escape of AuNP@PLA could be improved further when cells were additionally treated with desloratadine, thus outperforming commercial reagents such as Lipofectamine^® and jetPRIME^®. AuNP@PLA in combination with desloratadine was proven to induce PHD-2 silencing in fibroblasts, allowing upregulation of pro-angiogenic pathways. This finding in an in vitro context constitutes a first step towards improving diabetic wound healing with siRNA therapy.     

Nonlinear analysis and reliability of metallic truss structures

The present study goes into the search for the safety domain of civil engineering structures. The objective is to show how a reliability-evaluation brought by a mechanical sizing can be obtained. For that purpose, it is necessary to have a mechanical model and a reliability model representing correctly the behavior of this type of structure.It is a question on one hand, to propose a formulation for the nonlinear calculation (mechanical nonlinearity) of the spatial structures in trusses, and on the other hand, to propose or to adapt a formulation and a modeling of the reliability. The principle of Hasofer-Lind can be applied, in first approach, for the reliability index estimation, scenarios and the probability of failure.The made check concerned metallic in truss structures. Finally, some structures are calculated using the method adapted by Hasofer-Lind to validate the probability approach of the reliability analysis.     

Application of Artificial Intelligent Tools to Modeling of Glucosamine Preparation from Exoskeleton of Shrimp

The objective of this study was to forecast and optimize the glucosamine production yield from chitin (obtained from Persian Gulf shrimp) by means of genetic algorithm (GA), particle swarm optimization (PSO), and artificial neural networks (ANNs) as tools of artificial intelligence methods. Three factors (acid concentration, acid solution to chitin ratio, and reaction time) were used as the input parameters of the models investigated. According to the obtained results, the production yield of glucosamine hydrochloride depends linearly on acid concentration, acid solution to solid ratio, and time and also the cross-product of acid concentration and time and the cross-product of solids to acid solution ratio and time. The production yield significantly increased with an increase of acid concentration, acid solution ratio, and reaction time. The production yield is inversely related to the cross-product of acid concentration and time. It means that at high acid concentrations, the longer reaction times give lower production yields. The results revealed that the average percent error (PE) for prediction of production yield by GA, PSO, and ANN are 6.84, 7.11, and 5.49%, respectively. Considering the low PE, it might be concluded that these models have a good predictive power in the studied range of variables and they have the ability of generalization to unknown cases.     

Low temperature preparation and characterization of nanospherical anatase TiO2 and its photocatalytic activity on Congo red degradation under sunlight

Nanospherical titanium oxide with anatase structure was obtained at low temperature and normal pressure using a simple method of preparation. The dilute titanium (III) chloride solution was stirred at room temperature for several hours, and then ammonium hydroxide with hydrogen peroxide was added. A yellow gel TiO₂·xH₂O was obtained with nanodot shape and amorphous structure. Heated at 300 °C, it crystallized to pure anatase structure with nanospherical shape. The anatase particles prepared show good adsorption and photodegradation of Congo red solution under the sunlight. Materials were characterized by powder X-ray diffraction, thermal analysis, transmission electron microscope and UV spectroscopy.     

Improvement of Canola Oil Frying Stability by Bene Kernel Oil’s Unsaponifiable Matter

The anti-rancidity effect of the unsaponifiable matter fraction of bene kernel (UFB) oil on canola oil (CAO) during frying was compared to that of tert-butyl hydroquinone (TBHQ). The UFB was separated into hydrocarbons (12.9%), carotenes (9.6%), tocopherols and tocotrienols (65.8%, mainly γ-tocopherol), linear and triterpenic alcohols (3.8%), methyl sterols (2.8%), sterols (3.0%, mainly β-sitosterol, stigmasterol, Δ⁵-avenasterol, and Δ⁷-avenasterol, respectively), and triterpenic dialcohols (2.2%). The results obtained from the measurements of the total polar compounds, the conjugated diene value, the carbonyl value, and total tocopherols showed that the stability of CAO improves similarly in the presence of UFB or TBHQ, and even more in the presence of UFB in some cases (especially inhibition of oxidized triglyceride monomers and triglyceride dimers). The analysis of polar components showed that the antioxidative additives were more effective to resist the formation of thermo-oxidative than hydrolytic products during the frying of CAO.     

Improvement of physical properties of Cu-infiltrated W compacts via electroless nickel plating of primary tungsten powder

In the present research, tungsten particles were coated using nickel/nickel-phosphorus electroless plating technique. The coated tungsten powders were pressed under constant pressure to achieve compact material of cylindrical shape with same porosity. Then, attained compacts were infiltrated/penetrated by liquid copper under the hydrogen atmosphere in order to obtain W-15 wt.% Cu composites. The coated/uncoated powders as well as its infiltrated compacts were characterized by optical microscopy (OM) as well as scanning electron microscopy (SEM), EDS and XRD methods. The microstructure, relative density and specific resistivity of composites were compared. The microstructural observations revealed that the infiltration behavior can be improved in the compacts prepared by both nickel and nickel-phosphorus coated tungsten powders, in comparison with uncoated ones. In addition, it was found that relative density may be raised from < 85% to > 95% by nickel electroless plating, that leads to decrease specific resistivity from 6 to 4 µΩ cm. Enhancement of electrical conductivity of infiltrated W-15 wt.% Cu compacts prepared by electroless nickel coated tungsten powders was related to its higher density.     

Influence of prior cold working on the tribological behavior of Cu–0.65 wt.%Cr alloy

The influence of prior cold working on the friction and wear behavior of Cu–0.65 wt.%Cr alloy under dry sliding against a steel disk was investigated on a pin-on-disk wear tester. The worn surfaces and debrises of Cu–Cr alloy were analyzed by scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectrum. The results indicated that prior cold working and aging had an effect on the hardness and wear resistance of Cu–Cr alloy; in other words hardness and wear rate increased with the amount of cold working. At constant aging temperature, the wear rate of Cu–Cr alloys increase with cold working and reached maximum at 50% cold working. At constant amount of cold working aged specimens at 500 °C shows higher wear resistance than 450 °C. Crack initiation and propagation in the tribolayer and at the interface of subsurface and tribolayer was the dominant mechanism during the sliding process.     

An architecture for scheduling with the capability of minimum share to heterogeneous Hadoop systems

The Journal of Supercomputing - Job scheduling in Hadoop has been thus far investigated in several studies. However, some challenges including minimum share (min-share), heterogeneous cluster,...     

Antimicrobial silicone rubbers based on photocatalytically active additives

The modification of plastics to generate germ-reducing surface materials is a promising strategy to decrease nosocomial infections in hygiene-sensitive areas. In this paper, photocatalytically active nanoparticles were incorporated as additives, not as a coating, into silicone rubber matrix material to produce elastic antibacterial bulk materials. Samples with 5 wt% and 10 wt% of two different types of TiO₂ and ZnO were prepared and investigated. The thermal analysis of the developed materials showed a complete vulcanization of the developed materials and slight modifications of mechanical properties were found. Investigations of the surface of the materials indicated no changes in the wettability of the surfaces or in their fourier transform infrared spectrometer (FT-IR) spectra, suggesting no degradation of the developed material. The photocatalytic activity on the surface of the test samples was investigated by microbial tests with Escherichia coli, Pseudomonas fluorescens, and Staphylococcus aureus bacteria. Depending on the additive type and the test germs, the samples showed different intensities of a germ-reducing effect (up to >99,999%).