Advances in reduction of NOx and N2O1 emission formation in an oxy-fired fluidized bed boiler

Fossil fuel combustion is one of the major means to meet the mounting global energy demand. However, the increasing NO_x and N₂O emissions arising from fossil fuel combustion process have hazardous effects. Thus, mitigating these gases is vital to attain a sustainable environment. Interestingly, oxy-fuel combustion in fluidized bed for carbon capture and minimized NO_x emissions is strongly sustainable compare to the other approaches. It was assessed that NO_x formation and fuel-N conversion have significant limitation under oxy-fluidized bed compared to air mode and the mechanism of NO_x formation is still deficient and requires further development. In addition, this review paper discussed the potential of primary measure as low emission process with others supplementary techniques for feasible NO_x reduction. The influences of combustion mode, operating parameters, and reduction techniques such as flue gas recirculation, oxygen staging, biomass co-firing, catalyst, influence of fluidized bed design and structure, decoupling combustion and their merges are respectively evaluated. Findings show that significant minimization of NO_x emission can be achieved through combination of primary and secondary reduction techniques.     

Bubble dynamics in bubbling fluidized beds of ellipsoidal particles

This article presents a CFD-DEM study on the effect of particle shape on bubble dynamics in bubbling fluidized beds. The particles used are ellipsoids, covering from disk-type to cylinder-type. The phenomena such as bubble coalescence and splitting are successfully generated, and the results are compared with literature, showing a good agreement. The results demonstrate that the bubble forming/rising regions and patterns are influenced significantly by particle shape. Ellipsoidal particles have asymmetrical bubble patterns with two or more circulation vortices while the bubbles for spherical particles form at the bed centerline and rise through the center of the bed. Hence, the vertical mass flux at the bed centerline for spheres is always positive, and ellipsoids have negative or positive vertical mass fluxes. The solid mixing estimated based on the dispersion coefficient revealed poor mixing for ellipsoids. Spherical particles have a larger bubble size and higher bubble rising velocity than ellipsoids.     

A comparative study of accelerated weathering of epoxy resins based on DGEBA and HDGEBA

The durability of epoxy resins is an important factor in applications of composites to timber engineering. We carried out a comparative study of the effect of accelerated weathering on epoxy resins based on the glycidyl ether of bisphenol A (DGEBA) or hydrogenated diglycidyl ether of bisphenol A (HDGEBA) cured with 2,2,4-trimethylene-1,6-hexadiamine, using various characterization tools, including mechanical and thermal testing and SEM to evaluate the effect of exposure to UV light, moisture and elevated temperature cycles on the properties of the resins. Mechanical testing showed that after 6 months accelerated weathering reduced by 50% the tensile strength of DGEBA-TMDA while HDGEBA-TMDA epoxies lost slightly less strength over the same exposure period. Elongation at break increased after 6 months of accelerated weathering from 5.1?±?0.1% to 7.5?±?0.3% for DGEBA-TMDA epoxy specimens, and from 0.9?±?0.3% to 2.0?±?0.1% for HDGEBA-TMDA epoxy specimens. FTIR of the epoxies showed increases in the absorbance of hydroxyl and carbonyl groups for both epoxies on accelerated weathering, but the hydroxyl and carbonyl indexes reached values 90 and 40% higher respectively for DGEBA than HDGEBA-based epoxy resins. While susceptibility to accelerated weathering on the molecular scale was clearly greater for the DGEBA-based epoxy on the molecular scale, this did not translate into a significant deterioration in mechanical properties relative to HDGEBA over the time scale of the accelerated weathering experiments.