Hydrological simulations in the Rhine basin.

Simulations with regional climate models (RCMs), carried out for the Rhine basin, have been analyzed in the context of implications of the possible future discharge of the Rhine river. In a first analysis, the runoff generated by the RCMs is compared to observations, in order to detect the way the RCMs treat anomalies in precipitation in their land surface component. A second analysis is devoted to the frequency distribution of area averaged precipitation, and the impact of selection of various driving global climate models.     

Accidents,often the result of an ‘uncontrolled business process’—a study in the (Dutch) chemical industry

Often companies in the (petro‐) chemical industry claim that all possible countermeasures against potential accidents have been taken and therefore accidents are unforeseeable. In this paper we question this statement by analysing the pre‐warning signals (precursors) preceding a number of industrial accidents. 17 accidents that occurred in the (petro‐) chemical industry have been investigated by exploring FACTS, an accident database containing information about industrial accidents worldwide. This paper will demonstrate that the existence of precursor information could have been used to foresee and even prevent these accidents if a proper control action had been initiated. The accidents are analysed further, according to a control model, which was adapted from that of C. Argyris. It demonstrates the ineffectiveness of several elements of business process control loops and that the so‐called ‘double‐loop learning’ cycle is more important than the ‘single‐loop learning’ cycle if one considers safety improvement. Copyright © 2003 John Wiley & Sons, Ltd.     

A method to estimate the initial length of equine tendons

A procedure is described by which the length of a tendon at the onset of loading is determined objectively. The procedure includes the fitting of third-order polynomial functions on the load-elongation data. The onset of loading is detected by an increasing fit of the polynomial by selective data reduction of the initial part of the load-elongation curve. The procedure results in an objective and reproducible definition of the zero strain level of a tendon.     

Quantifying technological aspects of process sustainability: a thermodynamic approach

Thermodynamic analysis has greatly helped to compare and to improve the energy efficiency of all kinds of technological processes, and recently we have also attempted to analyse some important biochemical processes under intracellular conditions. This work has pointed to some key strategies on sustainable process operation, such as the exceptionally high thermodynamic efficiencies of chemical and solar energy conversion in living cells.From this it was expected that the sustainability strategies of specific biochemical processes and those of the ecosphere as a whole could be of guidance to current technological processes, especially now that there is a growing demand from government and industry to effectively deal with sustainability aspects in process analysis. Our focus on this issue has led to methodologies to quantify technological aspects of sustainability by making use of thermodynamic principles. Three indicators were constructed to express three technological aspects of process sustainability. First, an indicator for the sustainability of resource utilization considers the thermodynamic input and the availability the resources used in the process. Secondly, an efficiency indicator focuses on the conversion and loss of thermodynamic quantities in the process itself. Thirdly, an indicator for environmental compatibility takes into account the thermodynamic input required to prevent possible negative side effects of the process, such as global warming or water pollution. The three indicators are used to reflect on (un)sustainable characteristics of current technological processes compared to biochemical processes. Finally, we address the drawbacks of combining indicator values to express overall sustainability.     

Thermoplastic vulcanizates obtained by reaction-induced phase separation: Interplay between phase separation dynamics,final morphology and mechanical properties

Reaction-induced phase separation (RIPS) of miscible blends of poly(?-caprolactone) (PCL) and an epoxy resin based on poly(propylene oxide) (PPO) was used to prepare thermoplastic vulcanizates (TPVs) with fine rubber dispersions. Scanning electron microscopy (SEM) confirmed the formation of cross-linked rubber particles dispersed in the thermoplastic matrix at PCL contents ≥20 wt%. The morphology development during phase separation was studied by optical microscopy (OM) and time-resolved small-angle light scattering (SALS). It was shown that higher curing temperatures lead to a decrease in rubber particle size, but at the same time lead to an increase in the extent of particle connectivity. In some cases, gelation of the PPO-rich phase limits full structure development, which leads to extensive connectivity between the dispersed rubber particles and a strong deterioration in tensile properties.     

An improved system for the control of dissolved oxygen in freshwater aquaria

A system for the removal and control of dissolved oxygen (DO) from freshwater was designed and constructed with aquarium-type fish studies in mind. Degassed water was obtained using a partial vacuum of -14 psi, and DO regulated at an aquarium scale using electronically controlled aeration with timed partial water renewal. The degassing system was capable of producing water with approximately 1.7 mg L(-1) DO within 10 min of operation, and 0.55 mg L(-1) after 2h. The control system was capable of maintaining DO levels of ca 0.8 mg L(-1) over 48 h in the absence of aeration and further capable of precisely controlling DO levels as low as 1.16+/-0.002 mg L(-1) (mean+/-SEM) with aeration over a 48 h period.     

A monotone multigrid solver for two body contact problems in biomechanics

The purpose of the paper is to apply monotone multigrid methods to static and dynamic biomechanical contact problems. In space, a finite element method involving a mortar discretization of the contact conditions is used. In time, a new contact-stabilized Newmark scheme is presented. Numerical experiments for a two body Hertzian contact problem and a biomechanical application are reported. This work was supported by the DFG Research Center Matheon.     

Digital implementation of bus clamped space vector modulation

Space vector modulation has recently become a popular PWM method of supplying a high performance drive. An adaptation of SVM modulation is presented here. This system is called bus clamped space vector modulation. This method has some practical advantages when compared to normal SVM. These include a reduced average switching frequency, easy digital implementation and asynchronous control and switching frequencies     

Amore Address Mapping with Overlapped Rotating Entries

A memory management unit that supports demand paging is implemented with standard logic and fast-access RAM chips, resulting in much faster address translation that that provided by the standard Motorola MC68451 MMU.