Li-intercalation behaviour of vanadium oxide thin film prepared by thermal oxidation of vanadium metal

In order to produce thin films of crystalline V₂O₅, vanadium metal was thermally oxidised at 500 °C under oxygen pressures between 250 and 1000 mbar for 1-5 min. The oxide films were characterised by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). The lithium intercalation performance of the oxide films was investigated by cyclic voltammetry (CV), chronopotentiometry and electrochemical impedance spectroscopy (EIS). It was shown that the composition, the crystallinity and the related lithium intercalation properties of the thin oxide films were critically dependent on the oxidation conditions. The formation of crystalline V₂O₅ films was stimulated by higher oxygen pressure and longer oxidation time. Exposure for 5 min at 750 mbar O₂ at 500 °C resulted in a surface oxide film composed of V₂O_5, and consisting of crystallites up to 200 nm in lateral size. The thickness of the layer was about 100 nm. This V₂O₅ oxide film was found to have good cycling performance in a potential window between 3.8 and 2.8 V, with a stable capacity of 117 ± 10 mAh/g at an applied current density of 3.4 μA/cm². The diffusion coefficients corresponding to the two plateaus at 3.4 and 3.2 V were determined from the impedance measurements to (5.2 and 3.0) × 10⁻¹³ cm² s⁻¹, respectively. Beneath the V₂O₅ layer, lower oxides (mainly VO₂) were found close to the metal. At lower oxygen pressure and shorter exposure times, the oxide films were less crystalline and the amount of V⁴⁺ increased in the surface oxide film, as revealed by XPS. At intermediate oxygen pressures and exposure times a mixture of crystalline V₂O₅ and V₆O₁₃ was found in the oxide film.     

Thermoreversible gelation of poly[hexyl isocyanate]: Effect of solvent type

The thermoreversible gelation of poly[hexyl isocyanate] (PHIC), a rather stiff polymer, has been studied in two closely-related solvents of the alcane series, namely heptane and octane. Temperature-concentrations phase diagrams have been established for both systems. The occurrence of polymer-solvent compound is suggested in heptane but not in octane. This conclusion receives further support from neutron diffraction investigations through the use of the isotopic labelling technique. Finally, it is observed that the morphology is also affected by the solvent type although still displaying a fibrillar network structure.     

First direct synthesis of highly ordered bifunctionalized mesoporous silica thin films

Optically transparent and highly ordered mesoporous organosilica thin films functionalized with two different organic groups in various proportions were synthesized by templated-directed cocondensation of tetraethylorthosilicate (TEOS) and a mixture of two distinct and functional organotriethoxysilanes [NC(CH2)3Si(OEt)3 and O=P(OEt)2(CH2)3Si(OEt)3]. The mesostructured films obtained by evaporation induced self-assembly (EISA) approach were deposited on glass or silicon substrates by dip-coating. They were characterized by Grazing Incidence Small Angle X-ray Scattering (GISAXS) and X-ray reflectivity. We showed that whatever the proportion in organic groups, only 2D hexagonal phase having p6m symmetry was observed for all the materials indicating a good compatibility between the organic groups. The bi-functionalization of the internal pores surface by the organotriethoxysilanes groups was clearly evidenced by using micro-Raman spectroscopy.     

The effect of expectancy of a threatening event on time perception in human adults.

Two experiments were conducted to investigate the effect of a threatening stimulus in human adults in a temporal bisection task. In Experiment 1, for two anchor duration conditions (400/800 vs. 800/1600 ms), the participants completed trials in which the probe duration was followed by an aversive stimulus or a nonaversive stimulus. The results showed that the duration was judged longer when the participants expected an aversive rather than a nonaversive stimulus. In Experiment 2, the effect of the temporal localization of the aversive stimulus was also tested, with the aversive stimulus being presented at the beginning or at the end of the probe duration. The results revealed a temporal overestimation in each condition compared to the trials in which no aversive stimulus was presented. Furthermore, the temporal overestimation was greater when the expectation for the forthcoming threatening stimulus was longer. This temporal overestimation is explained in terms of a speeding-up of the neural timing system in response to the increase in the arousal level produced by the expectation of a threatening stimulus. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

激光诱导击穿光谱法连续测定高炉流道中的组分和温度

介绍了用于炼铁和炼钢领域过程控制的传感器。用激光诱导击穿光谱法（LIBS）连续测定高炉（BF）流道中的组分和温度,此传感器主要用于高炉流道的在线测量,监测了两次浇铸过程中元素硅、锰和碳的浓度,结果满意。     

In vitro studies and preliminary in vivo evaluation of silicified concentrated collagen hydrogels

Hybrid and nanocomposite silica-collagen materials derived from concentrated collagen hydrogels were evaluated in vitro and in vivo to establish their potentialities for biological dressings. Silicification significantly improved the mechanical and thermal stability of the collagen network within the hybrid systems. Nanocomposites were found to favor the metabolic activity of immobilized human dermal fibroblasts while decreasing the hydrogel contraction. Cell adhesion experiments suggested that in vitro cell behavior was dictated by mechanical properties and surface structure of the scaffold. First-to-date in vivo implantation of bulk hydrogels in subcutaneous sites of rats was performed over the vascular inflammatory period. These materials were colonized and vascularized without inducing strong inflammatory response. These data raise reasonable hope for the future application of silica-collagen biomaterials as biological dressings.     

Geometry control of the junction between two fractal curves

The general objective of our work is to create a geometric modeller based on iterative processes. With this objective in mind, we have to provide tools that work with fractal objects in the same manner as with objects of classical topology. In this article we focus on the constructing of an intermediate curve between two other curves defined by different iterative construction processes. A similar problem often arises with subdivision surfaces, when the goal is to connect two surfaces with different subdivision masks. We start by dealing with curves, willing to later generalise our approach to surfaces. We formalise the problem with the Boundary Controlled Iterated Function System model. Then we deduct the conditions that guarantees continuity of the intermediate curve. These conditions determine the structure of subdivision matrices. By studying the eigenvalues of the subdivision operators, we characterise the differential behaviour at the connection points between the curves and the intermediate one. This behaviour depends on the nature of the initial curves and coefficients of the subdivision matrices. We also suggest a method to control the differential behaviour by adding intermediate control points.     

Influence of Silicification on the Structural and Biological Properties of Buffer‐Mediated Collagen Hydrogels

A buffer‐mediated gelation route for collagen hydrogels that allows the formation of homogeneous composite and hybrid materials with various silica sources (i.e., colloidal silica and soluble silicates) at high concentration (up to 25 × 10^?3 M ) is described. Most significant improvement in rheological properties and proliferation of primary adult human dermal fibroblasts was obtained for the silicate‐based hybrid materials. A similar trend was observed in composite materials incorporating 14 nm SiO₂ nanoparticles, although to a much lesser extent, whereas larger colloids (80 and 390 nm) did not significantly impact mechanical stability and cell behavior. Modification of 80 nm particles surface with amine groups weakens the collagen‐mineral interface, resulting in the decrease of material stability and leading to particle aggregation during the course of cell proliferation experiments.     

Radio‐opaque fecal impaction and pseudo‐occlusion in a dialyzed patient taking lanthanum carbonate

Lanthanum therapy is an efficient therapy of hyperphosphoremia by chelating phosphore in the digestive tract. Lanthanum is a silvery white metallic element that belongs to group 3 of the periodic table. This drug is lightly absorbed and has low water solubility. It should be borne in mind that abdominal X‐rays of patients taking lanthanum carbonate may have a radio‐opaque appearance typical of imaging agents. This characteristic is suggested to confirm adherence of the patient by doing an abdominal X‐ray. We describe in our case a particular good compliant patient with slow digestive transit, which ends by pseudo‐occlusion.