Glyoxal Ozonation Process in Aqueous Solution

The process of ozonation of glyoxal in aqueous solution has been studied by following its chemical and kinetic evolution. Results show that the oxidative process leads to formation of carboxylic functions and carbon dioxide according to a constant selectivity ratio at varying conversion degree.. Comparison between the oxygen amounts of reaction products and the corresponding ozone consumptions reveals that molecular oxygen takes part in the reaction process. System behavior is explained on the basis of radical reaction mechanism.     

Effect of advanced chilling methods on lipid damage during sardine (Sardina pilchardus) storage

Slurry ice is a biphasic system consisting of small spherical ice crystals surrounded by seawater at subzero temperature. Its effect on lipid damage (hydrolysis and oxidation) was evaluated during the chilled storage of a fatty fish species, sardine (Sardina pilchardus). Slurry ice treatment was checked alone and in combination with ozone and compared to traditional flake icing during a 22‐day storage. Different lipid damage indices (free fatty acids, FFA; peroxide value, PV; thiobarbituric acid index, TBA‐i; fluorescent compounds, FR) were checked and compared to sensory assessment and nucleotide degradation (K value). According to lipid hydrolysis (FFA) and oxidation (PV and FR) developments, slurry ice showed an inhibitory effect (p <0.05) on lipid damage during storage, as well as an inhibition of nucleotide autolytic degradation. Ozonised slurry ice did not provide differences (p >0.05) from slurry ice alone when considering lipid hydrolysis, nucleotide degradation and some lipid oxidation indices (PV and FR), although a higher (p <0.05) TBA‐i was observed at day 22 of storage when compared to flake ice and slurry ice treatments. However, a lower (p <0.05) fluorescence development was observed for fish treated under ozonised slurry ice when compared to traditionally iced fish. Sensory assessment showed a higher shelf life for fish samples treated under ozonised slurry ice than for their counterparts under slurry ice (15 d versus 12 d), while flake icing led to a far shorter shelf life (5 d). According to sensory and biochemical (lipid matter and nucleotide) analysis, slurry ice has proved to be a promising technology for damage inhibition and quality retention in a fatty fish species such as sardine. Ozonised slurry ice was also shown to be useful, since a longer shelf life was obtained in the present experiment and a pro‐oxidant effect of ozone on sardine lipids was not proved.     

Crystallization,morphology, structure and thermal behaviour of nylon-6/rubber blends

An experimental study was carried out in order to investigate the morphological, kinetic, structural and thermodynamic properties of nylon-6/rubber (namely ethylene-propylene copolymer (EPM) and ethylene-propylene copolymer functionalized by inserting along its backbone succinic anhydride groups (EPM-g-SA)) blends. The morphology and the overall kinetics of crystallization of the blends strongly depend on the type of copolymer added to nylon and on the blend composition. The EPM-g-SA acts as a nucleating agent for the Ny spherulites and at the same time causes a drastic depression of the overall kinetic rate constant. This decrease is related to the increase of the melt viscosity observed in Ny/EPM-g-SA blends. The crystalline lamella thickness of the Ny phase in the blends is lower than that of pure Ny crystallized at the same T_c suggesting that the presence in the melt of an elastomeric phase disturbs the growth of the Ny crystals. The rubber does not influence the thermal behaviour of the nylon. The results found lead to the conclusion that in the melt nylon-6 is incompatible with both EPM and EPM-g-SA copolymers.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Model falsification using set‐valued observers for a class of discrete‐time dynamic systems: a coprime factorization approach

This article introduces a new method for model falsification using set‐valued observers, which can be applied to a class of discrete linear time‐invariant dynamic systems with time‐varying model uncertainties. In comparison with previous results, the main advantages of this approach are as follows: The computation of the convex hull of the set‐valued estimates of the state can be avoided under certain circumstances; to guarantee convergence of the set‐valued estimates of the state, the required number of previous steps is at most as large as the number of states of the nominal plant; and it provides a straightforward nonconservative method to falsify uncertain models of dynamic systems, including open‐loop unstable plants. The results obtained are illustrated in simulation, emphasizing the advantages and shortcomings of the suggested method. Copyright © 2013 John Wiley & Sons, Ltd.     

A two‐step control approach for docking of autonomous underwater vehicles

This paper presents a novel integrated guidance and control strategy for docking of autonomous underwater vehicles. The approach to the base, and hence the control design, is divided in two steps: (i) in the first, at higher speed, the vehicle dynamics is assumed to be underactuated, and an appropriate control law is derived to steer the vehicle towards the final docking path, achieving convergence to zero of the appropriate error variables for almost all initial conditions; (ii) in the second stage, at low speed, the vehicle is assumed to be fully actuated, and a robust control law is designed that achieves convergence to zero of the appropriate error variables for all initial conditions, in the presence of parametric model uncertainty. Simulations are presented illustrating the performance of the proposed controllers, including model uncertainty and sensor noise. Copyright © 2014 John Wiley & Sons, Ltd.     

Applying model-driven engineering to the development of Rich Internet Applications for Business Intelligence

Business Intelligence (BI) applications have been gradually ported to the Web in search of a global platform for the consumption and publication of data and services. On the Internet, apart from techniques for data/knowledge management, BI Web applications need interfaces with a high level of interoperability (similar to the traditional desktop interfaces) for the visualisation of data/knowledge. In some cases, this has been provided by Rich Internet Applications (RIA). The development of these BI RIAs is a process traditionally performed manually and, given the complexity of the final application, it is a process which might be prone to errors. The application of model-driven engineering techniques can reduce the cost of development and maintenance (in terms of time and resources) of these applications, as they demonstrated by other types of Web applications. In the light of these issues, the paper introduces the S^m4RIA-B methodology, i.e., a model-driven methodology for the development of RIA as BI Web applications. In order to overcome the limitations of RIA regarding knowledge management from the Web, this paper also presents a new RIA platform for BI, called RI@BI, which extends the functionalities of traditional RIAs by means of Semantic Web technologies and B2B techniques. Finally, we evaluate the whole approach on a case study—the development of a social network site for an enterprise project manager.     

Non-Pauli observables for CWS codes

It is known that nonadditive quantum codes can have higher code dimensions than stabilizer codes for the same length and minimum distance. The class of codeword stabilized codes (CWS) provides tools to obtain new nonadditive quantum codes by reducing the problem to finding nonlinear classical codes. In this work, we establish some results on the kind of non-Pauli operators that can be used as observables in the decoding scheme of CWS codes and propose a procedure to obtain those observables.     

Hybrid Nanoscopy of Hybrid Nanomaterials

The combination of complementary techniques to characterize materials at the nanoscale is crucial to gain a more complete picture of their structure, a key step to design and fabricate new materials with improved properties and diverse functions. Here it is shown that correlative atomic force microscopy (AFM) and localization‐based super‐resolution microscopy is a useful tool that provides insight into the structure and emissive properties of fluorescent β‐lactoglobulin (βLG) amyloid‐like fibrils. These hybrid materials are made by functionalization of βLG with organic fluorophores and quantum dots, the latter being relevant for the production of 1D inorganic nanostructures templated by self‐assembling peptides. Simultaneous functionalization of βLG fibers by QD655 and QD525 allows for correlative AFM and two‐color super‐resolution fluorescence imaging of these hybrid materials. These experiments allow the combination of information about the topography and number of filaments that compose a fibril, as well as the emissive properties and nanoscale spatial distribution of the attached fluorophores. This study represents an important step forward in the characterization of multifunctionalized hybrid materials, a key challenge in nanoscience.