Parallax cues in the design of graphics used in technical education to illustrate complex spatial problems

The explanation of certain 3D concepts is based on 2D drawings. These drawings should contain certain depth cues, such as perspective and overlapping. Until recently, parallax has not been used as a depth cue. Nevertheless, new technologies allow it to be incorporated. This forms the background to our study of the design of interactive educational resources and stereoscopic graphics. The results obtained demonstrate that (1) the use of parallax cues improves the interpretation of the figures and (2) that the assistance they afford is most appreciated by the students with less highly developed spatial perception.     

Differential evolution solution to the SLAM problem

A new solution to the Simultaneous Localization and Modelling problem is presented in this paper. The algorithm is based on the stochastic search for solutions in the state space to the global localization problem by means of a differential evolution algorithm. This non linear evolutive filter, called Evolutive Localization Filter (ELF), searches stochastically along the state space for the best robot pose estimate. The set of pose solutions (the population) focuses on the most likely areas according to the perception and up to date motion information. The population evolves using the log-likelihood of each candidate pose according to the observation and the motion errors derived from the comparison between observed and predicted data obtained from the probabilistic perception and motion model.The proposed SLAM algorithm operates in two steps: in the first step the ELF filter is used at local level to re-localize the robot based on the robot odometry, the laser scan at a given position and a local map where only a low number of the last scans have been integrated. In the second step, the aligned laser measures and the corrected robot poses are used to detect whether the robot is revisiting a previously crossed area (i.e., a cycle in the robot trajectory exists). Once a cycle is detected, the Evolutive Localization Filter is used again to estimate the accumulated residual drift in the detected loop and then to re-estimate the robot poses in order to integrate the sensor measures in the global map of the environment.The algorithm has been tested in different environments to demonstrate the effectiveness, robustness and computational efficiency of the proposed approach.     

Towards a set of agrosystem-specific cropland mapping methods to address the global cropland diversity

Accurate cropland information is of paramount importance for crop monitoring. This study compares five existing cropland mapping methodologies over five contrasting Joint Experiment for Crop Assessment and Monitoring (JECAM) sites of medium to large average field size using the time series of 7-day 250 m Moderate Resolution Imaging Spectroradiometer (MODIS) mean composites (red and near-infrared channels). Different strategies were devised to assess the accuracy of the classification methods: confusion matrices and derived accuracy indicators with and without equalizing class proportions, assessing the pairwise difference error rates and accounting for the spatial resolution bias. The robustness of the accuracy with respect to a reduction of the quantity of calibration data available was also assessed by a bootstrap approach in which the amount of training data was systematically reduced. Methods reached overall accuracies ranging from 85% to 95%, which demonstrates the ability of 250 m imagery to resolve fields down to 20 ha. Despite significantly different error rates, the site effect was found to persistently dominate the method effect. This was confirmed even after removing the share of the classification due to the spatial resolution of the satellite data (from 10% to 30%). This underlines the effect of other agrosystems characteristics such as cloudiness, crop diversity, and calendar on the ability to perform accurately. All methods have potential for large area cropland mapping as they provided accurate results with 20% of the calibration data, e.g. 2% of the study area in Ukraine. To better address the global cropland diversity, results advocate movement towards a set of cropland classification methods that could be applied regionally according to their respective performance in specific landscapes.     

Set‐based fault detection and isolation for detectable linear parameter‐varying systems

In the context of fault detection and isolation of linear parameter‐varying systems, a challenging task appears when the dynamics and the available measurements render the model unobservable, which invalidates the use of standard set‐valued observers. Two results are obtained in this paper, namely, using a left‐coprime factorization, one can achieve set‐valued estimates with ultimately bounded hyper‐volume and convergence dependent on the slowest unobservable mode; and by rewriting the set‐valued observer equations and taking advantage of a coprime factorization, it is possible to have a low‐complexity fault detection and isolation method. Performance is assessed through simulation, illustrating, in particular, the detection time for various types of faults. Copyright © 2017 John Wiley & Sons, Ltd.     

Vision-based control for rigid body stabilization

This paper addresses the problem of stabilizing to a desired equilibrium point an eye-in-hand system, which consists of a single camera mounted on a rigid body free to move on . It is assumed that there is a collection of landmarks fixed in the environment and that the image coordinates of those landmarks are provided to the system by an on-board CCD camera. The proposed method addresses not only the problem of stabilization but also that of maintaining feature visibility along the system’s trajectory. The resulting solution consists of a feedback control law based on the current and desired image coordinates and reconstructed attitude and depth ratio information, which guarantees that (i) the desired equilibrium point is an almost global attractor; (ii) a set of necessary conditions for feature visibility holds throughout the system’s trajectories; and (iii) the image of a predefined feature point is kept inside the camera’s field of view.     

Position USBL/DVL sensor-based navigation filter in the presence of unknown ocean currents

This paper presents a novel approach to the design of globally asymptotically stable (GAS) position and velocity filters for Autonomous Underwater Vehicles (AUVs) based directly on the sensor readings of an Ultra-short Baseline (USBL) acoustic array system and a Doppler Velocity Log (DVL). The proposed methodology is based on an equivalent linear time-varying (LTV) system that fully captures the dynamics of the nonlinear system, allowing for the use of powerful linear system analysis and filtering design tools that yield GAS filter error dynamics. Numerical results using Monte Carlo simulations and comparison to the Bayesian Cramér Rao Bound (BCRB) reveal that the performance of the proposed filter is tight to this theoretical estimation error lower bound. In comparison with other approaches, the present solution achieves the same level of performance of the Extended Kalman Filter (EKF), which does not offer GAS guarantees, and outperforms other classical filtering approaches designed in inertial coordinates instead of the body-fixed coordinate frame.     

Robust quantification of the exposure to operational risk: Bringing economic sense to economic capital

Operational risk is commonly analyzed in terms of the distribution of aggregate yearly losses. Risk measures can then be computed as statistics of this distribution that focus on the region of extreme losses. Assuming independence among the operational risk events and between the likelihood that they occur and their magnitude, separate models are made for the frequency and for the severity of the losses. These are then combined to estimate the distribution of aggregate losses. While the detailed form of the frequency distribution does not significantly affect the risk analysis, the choice of model for the severity often has a significant impact on operational risk measures. For heavy-tailed distributions these measures are dominated by extreme losses, whose probability cannot be reliably extrapolated from the available data. With limited empirical evidence, it is difficult to distinguish among alternative models that produce very different values of the risk measures. Furthermore, the estimates obtained can be unstable and overly sensitive to the presence or absence of single extreme events. Setting a bound on the maximum amount that can be lost in a single event reduces the dependence on the distributional assumptions and improves the robustness and stability of the risk measures, while preserving their sensitivity to changes in the risk profile. This bound should be determined by expert assessment on the basis of economic arguments and validated by the regulator, so that it can be used as a control parameter in the risk analysis.     

A direct calculation of moments of the sample variance

A systematic method to deal with the interrelations of systems with multi-index quantities (random variables) is proposed. The method differs of the well-known Polykays. An application of the theoretical results here presented is the calculation of the moments of the sample variance for general populations in a direct way. The main advantage of the proposed methodology is that no conversion formulae and other complicated Polykays rules are needed. However, the proposed method is compatible with Polykays philosophy and conversion formulae and multiplication rules can be derived by using the theoretical results of this work. For practical purposes, two algorithms for the calculation of the moments of the sample variance are proposed.