Structure of microporous polypropylene sheets containing CaCO3 filler

The microporous polypropylene sheets were prepared by biaxially stretching polypropylene sheets containing CaCO₃ filler (particle size, 0.08–3.0 μm), when the CaCO₃ filler content was 59% by weight and the stretching ratio was 2.8 × 1.8. The microstructure of the sheets were investigated in relation to the CaCO₃ particle size by a N₂ gas permeation method. (1) Effective porosity increases with decreasing mean particle size of filler. (2) The tortuosity factor of the pore is in the range of 25–40 and becomes relatively smaller with decreasing mean particle size of filler. (3) The equivalent pore size becomes relatively smaller with decreasing mean particle size of filler.     

粒子网格混合方法模拟液滴夹带起始点

环状流动的特性对反应堆事故工况分析具有重要意义,本研究基于粒子网格混合方法对这一现象中的液滴夹带起始点问题进行了数值分析,利用网格求解流场,利用粒子模拟液膜及液滴的运动,探讨了气水流动大密度比情况下,不同流动方向,不同流体粘度,不同液膜厚度下的液滴夹带所需的临界气相流速,结果同经典关系式进行了对比,吻合良好．这一方法对于反应堆事故中的两相流动研究具有参考意义．     

125Te, 27Al, and 71Ga NMR Study of M2O3–TeO2 (M = Al and Ga) Glasses

The structures of M₂O₃–TeO₂ (M = Al and Ga) glasses have been investigated by means of ¹²⁵Te, ²⁷Al, and ⁷¹Ga NMR spectroscopies. The structural units of respective cations in M₂O₃–TeO₂ glasses were quantitatively analyzed. The fractions of TeO₄ trigonal bipyramid, AlO₆ and GaO₆ octahedra decreased and those of TeO₃ trigonal pyramid, AlO₄, AlO₅, and GaO₄ polyhedra increased with increasing M₂O₃ content. Based on the local structures around Te, Al, and Ga atoms, the structure models of M₂O₃–TeO₂ glasses were proposed.     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Graded evolution of anisotropic microstructure during sintering from crystal-oriented powder compact

Anisotropic sintering, including shrinkage and grain growth, was examined for c-axis-oriented (Sr,Ca)₂NaNb₅O₁₅ (SCNN) ceramics, which were prepared by colloidal processing under a magnetic field. In the c-axis-oriented SCNN powder compact, shrinkage and grain growth along the c-axis were higher than those along the a-axis. The anisotropic microstructural development was clearly associated with anisotropic sintering shrinkage. X-ray diffraction, scanning electron microscopy, and energy back scattering diffraction showed that the grain growth of oriented particles by including random grains contribute to the development of the oriented microstructure. Finally, the highly crystal-oriented SCNN ceramics with a densified microstructure were obtained through anisotropic sintering. These results clearly showed the potential to develop a well-defined anisotropic microstructure during sintering by designing and controlling the particle packing structure in a powder compact.     

Determination of atomistic deformation of tricalcium silicate paste with high-volume fly ash

We examined the effect of incorporating high-volume fly ash on the atomic arrangement and interatomic deformation behavior of calcium silicate hydrates in tricalcium silicate paste upon exposure to external forces. The interatomic structural changes and strains under compressive load were assessed using synchrotron in situ high-energy X-ray scattering-based atomic pair distribution function analysis. Three different types of strains, which were (a) macroscopic strains from gauges on the surfaces of specimen, (b) strains in a reciprocal space (Bragg peak shift), and (c) strains in real space (PDF peak shift), were compared to each other. All monitored and calculated strains for tricalcium silicate-fly ash (50 wt% fly ash) paste were compared with the counterparts of the pure tricalcium silicate paste. Pair distribution function analysis in the range of r < 10 Å indicated that the atomic arrangement of tricalcium silicate-fly ash was similar to that of synthetic calcium silicate hydrates followed by that of pure tricalcium silicate paste. Moreover, the pair distribution function refinement results revealed that the calcium silicate hydrate structure in tricalcium silicate-fly ash paste was similar to tobermorite 11 Å, unlike that in pure tricalcium silicate paste. The interatomic strain of tricalcium silicate-fly ash in the real space (r < 20 Å) was smaller than that of tricalcium silicate under compression, which suggested that the incompressibility of calcium silicate hydrates at atomistic scale was enhanced by the incorporation of fly ash into it. This was likely to be caused by the increased silicate polymerization of calcium silicate hydrates, which was attributed to the increase in the amount of silicate in their structure via the addition of fly ash.     

Impact fracture behavior of ethylene ionomer and structural change after stretching

We carried out tensile impact test and very low speed tensile test on ethylene‐based Ionomers (E/15wt %MAA) to clarify the relation between impact toughness and high‐ordered structure. We also studied the changes in high‐ordered structure under deformation by observing Differential Scanning Calorimetory (DSC) and Small‐Angle X‐ray Scattering (SAXS) of fractured surface. Na Ionomers showed ductile fracture in both high speed tensile impact (3 m/s) and very low speed tensile (2 mm/min). The disappearance of secondary melting point (Ti) in Na Ionomers was due to the destruction of ordered structure surrounding the ionic aggregate. Similar behavior was observed in 60% (or less) neutralized Zn Ionomers. However, 80% neutralized Zn Ionomer showed brittle failure in high‐speed tensile impact, and Ti did not disappear. SAXS studies of Na and Zn Ionomers after fracture, show no change both after molding (no aging) and after aging. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1712–1720, 2001     

Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.